EVOC PowerPC Core Board System

As a special computer equipment in the marginal field, industrial computer has been more and more widely used in various occupations in recent years, but many professional bosses or users still have a relatively one-sided understanding of industrial computers, and it is easy to fall into the misunderstanding of selecting equipment when buying industrial computers. How does equipment affect industrial control ...

The full English name of PLC is Program mable Logic Controller, which was produced in the early 70s of the 20th century. The earliest PLC appeared as a replacement relay system, and its main function was only a logical and simple sequential control function. ...

After a period of use, the industrial touch all-in-one computer will have problems such as dirty display or internal dust. That's where cleaning comes in. If the cleaning is not timely, it will lead to problems such as contact failure, system software failure, and system software echo. However, if the cleaning method is not right, ...

1. It can be powered on but not lit 1. There is no alarm sound display of Didi when booted, maybe it is poor contact of memory oxidation or there is a problem with the memory itself, the solution is to wipe the memory with an eraser and reinsert it back after power-off, and replace the memory with its own problem.

1. Heat dissipation performance: The embedded industrial computer has high requirements for heat dissipation performance, and generally adopts a fanless heat dissipation system. Large-area heat dissipation fin plan is adopted. This plan is efficient in heat dissipation and resistant to dust and water. ...

The industrial computer has the characteristics of dustproof, moisture-proof, vibration-proof, high-temperature resistance, etc., and the following matters should be paid attention to when using it: 1. In the process of using the industrial computer, the industrial computer should not be disassembled, and the common problems and elimination methods of the industrial computer should be referred to when there is a problem; Do not move the IPC, so as not to be due to oscillation ...

The motherboard of the industrial computer (referred to as the industrial control motherboard) is an industrial computer motherboard used in industrial occasions, which can get used to a wide temperature environment, a harsh environment, and a long-term high-load operation according to the needs. It may be due to the harsh working environment of its application, so the industrial computer motherboard ...

Embedded industrial computer can cooperate with the industrial system to complete one or more specific industrial missions in a small industrial site, with open modular structure, strong data processing capabilities, good software development environment and high-performance network and communication support. When the electrical function is fully ...

Advantech's industrial control equipment is used and maintained. 　　Error handling is first-come, first-served. First of all, we must understand and then familiarize ourselves: first analyze and consider the possible problems according to the on-site situation, and then we can do it; First cleaning, then repairing: practice has shown that very ...

First of all, it is necessary to give EVOC industrial computer a stable working environment. If there is a sensation when the machine reads and writes to a disk or hard disk, the drive will be severely worn or damaged. If you want to place it against a wall, there should be at least a gap from the wall to ensure good heat dissipation.

Power products are widely used in industrial automation control, military equipment, scientific research equipment, industrial control equipment, computers and computers, communication equipment, power equipment, instrumentation, medical equipment, semiconductor refrigeration and heating, etc. If the IPC or motherboard has never been able to power on, you need to ...

　　EVOC motherboard ECO-1816 features: 1) The motherboard adopts IntelH61/B65 chip structure, supports XP system and 2003Server server system, and the highest configuration is I7-3770. 2)2*240pinDDR3 dual channel ...

Serial port is a very common device communication protocol on industrial motherboards, and most industrial motherboards contain more than two serial ports based on RS-232. The serial port sends and receives bytes on a bit-by-bit basis, which is slower than parallel communication on a byte-by-byte basis, but the serial port can be used in the use of a single wire.

　　First, the system overview The automatic telecontrol information commissioning of the substation is a necessary operation to be completed before the new substation is put into operation, and it is necessary to debug it after the opening of the supporting optical fiber channel of the substation in the past. In recent years, there has been a lot of growth by ...

Compared with general commercial computers, the function of industrial computers is more outstanding and the operation is more stable, but when the engine is slow, it is necessary to consider whether there is a problem; Possible elements are: There are too many automatic launch projects in the IPC system launch file; The disk may have bad tracks; The disk is fragmented; ...

(1) THE HEIGHT IS GENERALLY DIVIDED INTO 1U (44MM*430MM*XX), 2U (88*430*XX), 3U, 4U (176MM*430MM*XX), 5U, 6U, 7U, 8U, ETC., A 1U HEIGHT IS 44MM, AND OTHER HEIGHTS ARE IN ORDER; (2) Length: National ...

The daily use protection of industrial computers is used in many occasions, but there are not many people who can really turn industrial computers very well. It is often seen that some people are busy for a long time and still can't clean up the machine failure, while some people are handy to use it. This difference comes from the user's interest in industrial control ...

On November 8th, the 2017 (6th) Global Automation and Production Theme Summit, co-sponsored by the internationally renowned industrial media CONTROL ENGINEERING China and PLANT ENGINEERING China (referred to as CEC and PEC), was grandly held at Howard Johnson Kinguyuan Hotel in Shanghai.

The industrial control motherboard is an important part of the industrial computer, which can get used to the messy environment and long-term high-load work on the industrial site. The differences from commercial motherboards are: First, the materials and planning of components Commercial motherboards ...

1. Hard disk speed The speed of the hard disk is one of the important parameters to identify the level of the hard disk, and it is one of the key factors of the internal transfer rate of the hard disk, which directly affects the speed of the hard disk to a large extent. The speed of the hard disk refers to the rotation speed of the motor shaft in the hard disk, which is the speed of the hard disk in 60 seconds.