Rorobot BML-2076D5[P]/S The recommended load is 7g

Create Date: 2024-8-30 12:03:23|Source: Soft Touch/Rorobot

Previous
Next
Brand:
Soft Touch/Rorobot

Origin:
Suzhou

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
Soft claw BML-2076D5[P]/S

Product Introduction
Rorobot BML-2076D5[P]/S Fingertips open under positive pressure and clamp in vacuum

quality assurance

Attentive service

Secure transactions

Product Description

Introduction: Rorobot BML-2076D5[P]/S

Rorobot BML-2076D5[P]/S The recommended load is 7g

Features:

The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G.

When the workpiece is light in weight, or very soft, and it is easy to adhere to and adsorb on the soft claw when blanking, the non-marking material [PASJ] should be preferred.

Product parameters

Recommended load: 7g

Service life: 1,500,000 times

Safe working air pressure: 80kPa

Opening and closing frequency: 6 times/second

External grasping blessing force: 0-0.07N

BMC module weight: 6g

BML module weight: 15g

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.

This article introduces the Rorobot soft jaw BMC-2076D5[PAS]/S product, if you are interested in Rorobot soft jaw, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.

More on that

	柔触/Rorobot 手指模块C6V4 手指高度14mm 简介：柔触/Rorobot 手指模块C6V4,特点及适用场景:夹持力**大,可串联(使用螺丝配件包PK)使用并简化气管布置.多用于多条手指同时工作且工件间紧凑的场景,工件宽度一般大于50mm. 　　产品特点 ...
	柔触/Rorobot 手指F-B3 负压行程10mm 简介：柔触/Rorobot 手指F-B3 　　产品特点　　手指材质可选择常规型，增强型[H]以及防静电型[AS]。　　增强型材质[H]拥有更高的工作压力范围,夹持力**高达到常规材质手指的300%。　　防 ...
	柔触/Rorobot 手指模块FM-A4V2 手指宽度24mm 简介：柔触/Rorobot 手指模块FM-A4V2，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调，固定方式:可从四个方向固定(可选)，进气方式:可从三个方向安装进气接头(可选) . ...
	柔触/Rorobot 机器人柔爪BMC-4B32[H]/S 建议负载50g 简介：柔触/Rorobot 机器人柔爪BMC-4B32[H]/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，夹持指尖距G以及外撑指尖距D可使用工作气压调节。　　柔爪材 ...
	柔触/Rorobot 手指模块FMA6-V3 手指长度83mm 简介：柔触/Rorobot 手指模块FMA6-V3，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调。　　产品特点　　特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距 ...
	柔触/Rorobot 手指模块B3V4 自重61g 简介：柔触/Rorobot 手指模块B3V4，特点及适用场景:夹持力**大，可串联(使用螺丝配件包PK)使用并简化气管布置。多用于多条手指同时工作且工件间紧凑的场景，工件宽度-般大于50mm。　　产品特 ...
	柔触/Rorobot 手指模块B8V3 手指宽度18mm 简介：柔触/Rorobot 手指模块B8V3，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调。　　产品特点　　特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及 ...
	柔触/Rorobot 柔爪BMC-2G1624[HB]/S 开合频率6次/秒简介：柔触/Rorobot 柔爪BMC-2G1624[HB]/S 　　产品特点　　真空状态夹紧，正压状态指尖打开，可由真空直接驱动　　配合柔触空气驱动器使用(正负压切换驱动)可提升夹持工件尺寸　　柔爪 ...
	柔触/Rorobot 手指模块B5V5 模块高度51mm 简介：柔触/Rorobot 手指模块B5V5，特点及适用场景:模块更轻薄，安装模块指间距**小仅有10mm,适合夹取微小，轻薄的工件。也可串联(使用螺丝配件包PK)使用，但与V4相比，每个手指都需要独立供气 ...
	柔触/Rorobot 柔爪B-4H18[H]/S 建议负载15g Introduction: Rorobot B-4H18[H]/S Features: The fingertips are open in the positive pressure state, clamped in the negative pressure state, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by using the external support fingertip distance D. The soft claw material is divided into conventional type [H] and non-marking type [ ...
	柔触/Rorobot 手指模块B5V4 模块宽度25mm 简介：柔触/Rorobot 手指模块B5V4,特点及适用场景:夹持力**大,可串联(使用螺丝配件包PK)使用并简化气管布置.多用于多条手指同时工作且工件间紧凑的场景,工件宽度-般大于50mm. 　　产品特点　 ...
	柔触/Rorobot 柔爪BML-3A18[HAS]/S 简介：柔触/Rorobot 柔爪BML-3A18[HAS]/S，B-4BG64/S 是一款外抓式柔爪，推荐夹持工件尺寸(28-50)mm,开合尺寸在（50.4-80）mm，适合抓取蒸蛋糕、包子、烧麦以及枣糕等这类柔软的食品，B-4BG64/S ...
	柔触/Rorobot 模块B-20006[P]/S 简介：柔触/Rorobot 模块B-20006/S，B-20006/S是一款结构小巧的柔爪，特别适合条状类、杆形工件抓取，可实现包覆式抓取，无痕无损搬运分拣，确保产品不会被划伤，降低不良率。多个柔爪串联时， ...
	柔触/Rorobot 手指模块A6V4 手指长度83mm 简介：柔触/Rorobot 手指模块A6V4，特点及适用场景:夹持力**大，可串联(使用螺丝配件包PK)使用并简化气管布置。多用于多条手指同时工作且工件间紧凑的场景，工件宽度-般大于50mm。　　产品特 ...
	柔触/Rorobot 手指模块C8V5 模块宽度18mm 简介：柔触/Rorobot 手指模块C8V5，特点及适用场景:模块更轻薄，安装模块指间距**小仅有10mm,适合夹取微小，轻薄的工件。也可串联(使用螺丝配件包PK)使用，但与V4相比，每个手指都需要独立供气 ...
	柔触/Rorobot 连接模块CM-S04 自重28g 简介：柔触/Rorobot 连接模块CM-S04 　　产品特点　　末端可安装全系列柔喙模块　　可安装于柔系列滑侈安装板[SMP]上page.50 　　弹性缓冲结构设计，尤其适用于多层弹性柔软面料类产品分 ...
	柔触/Rorobot 法兰连接模块FCM-R08 简介：柔触/Rorobot 法兰连接模块FCM-R08 　　产品特点　　符合ISO9409-1：2004（即标GB/T 14468．1·2006/）适配于市面上大部分机器人，法兰。　　建议大负载20kg 　　适合非标夹爪组合 ...
	柔触/Rorobot 手指模块FM-B5V1 模块宽度:23mm 简介：柔触/Rorobot 手指模块FM-B5V1，特点及适用场景:双指模块组合方式,结构紧凑,占用空间小.指间距及安装角度不可调节,适用于夹取微小、轻薄的工件. 　　产品特点　　特点及适用场景:双指 ...
	柔触/Rorobot 手指F-C8 指宽12mm 简介：柔触/Rorobot 手指F-C8 　　产品特点　　手指材质可选择常规型，增强型[H]以及防静电型[AS]。　　增强型材质[H]拥有更高的工作压力范围,夹持力**高达到常规材质手指的300%。　　防 ...
	柔触/Rorobot 手指模块FM-B4V1 负压指间距44mm 简介：柔触/Rorobot 手指模块FM-B4V1特点及适用场景:双指模块组合方式,结构紧凑,占用空间小.指间距及安装角度不可调节,适用于夹取微小、轻薄的工件. 　　产品特点　　特点及适用场景:双指模 ...