Soft Touch/Rorobot Finger F-C8 finger width 12mm

Create Date: 2024-8-30 12:03:23|Source: Soft Touch/Rorobot

Product Description
Introduction: Soft Touch/Rorobot Finger F-C8
Soft Touch/Rorobot Finger F-C8 finger width 12mm

Features:

The finger material can be selected as regular type, reinforced type [H] and anti-static type [AS].

The reinforced grade [H] has a higher operating pressure range and a gripping force of up to 300% of the fingers of conventional grades.

Anti-static material [AS], non-sticking, suitable for the electronics industry and clean workshops.

Product parameters

Fingertip stroke: 80mm

Negative pressure stroke: 38mm

Positive pressure stroke: 42mm

Height: 14mm

Length: 69mm

Finger width: 12mm

Tare weight: 8g

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.

This article introduces the F-C8 product of Rorobot Finger, if you are interested in Rorobot Finger, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
More on that
柔触/Rorobot 手指模块C7V3 模块高度46mm 柔触/Rorobot 手指模块C7V3 模块高度46mm

简介:柔触/Rorobot 手指模块C7V3,特点及适用场景:独立安装,可配合SMP滑移安装板安装,指间距及角度可调   产品特点   特点及适用场景:独立安装,可配合SMP滑移安装板安装,指间距及角 ...

柔触/Rorobot 机器人柔爪BML-3G20[H]/S 建议负载60g 柔触/Rorobot 机器人柔爪BML-3G20[H]/S 建议负载60g

简介:柔触/Rorobot 机器人柔爪BML-3G20[H]/S   产品特点   正压状态指尖打开,负压状态夹紧,建议配合柔触空气驱动器使用,夹持指尖距G可使用工作气压调节。   柔爪材质分为常规型[H] ...

柔触/Rorobot 手指模块B4V4 模块长度72mm 柔触/Rorobot 手指模块B4V4 模块长度72mm

简介:柔触/Rorobot 手指模块B4V4,特点及适用场景:夹持力**大,可串联(使用螺丝配件包PK)使用并简化气管布置.多用于多条手指同时工作且工件间紧凑的场景,工件宽度-般大于50mm.   产品特点   ...

柔触/Rorobot 手指模块FM-A5V1 模块长度109mm 柔触/Rorobot 手指模块FM-A5V1 模块长度109mm

简介:柔触/Rorobot 手指模块FM-A5V1,特点及适用场景:双指模块组合方式,结构紧凑,占用空间小.指间距及安装角度不可调节,适用于夹取微小、轻薄的工件,固定方式:可从三个方向固定.   产品特点 ...

柔触/Rorobot 机器人柔爪BML-20201[HAS]/S 柔触/Rorobot 机器人柔爪BML-20201[HAS]/S

简介:柔触/Rorobot 机器人柔爪BML-20201[HAS]/S,B-20005V/S 能很好的用于0.18mm-3mm之间小而轻又薄的异形工件,即使紧贴平面,它也能做到捏边抓取,确保产品表面无瑕疵。针对轻小、落料精度要 ...

柔触/Rorobot 柔爪BMC-3G20[HAS]/S 柔触/Rorobot 柔爪BMC-3G20[HAS]/S

简介:柔触/Rorobot 柔爪BMC-3G20[HAS]/S   产品特点   正压状态指尖打开,真空状态夹紧,建议配合柔触空气驱动器使用,支持指尖距G可使用工作气压调节。   柔触材质分为常规型[H]和无 ...

Soft Touch/Rorobot Finger Module FM-A6V1 Self-weight 195g Soft Touch/Rorobot Finger Module FM-A6V1 Self-weight 195g

Introduction: Rorobot Finger Module FM-A6V1, Features and Applicable Scenarios: Combination of Two-Finger Module, Compact Structure, Small Footprint. The spacing and installation angle are not adjustable, suitable for clamping tiny, thin and light workpieces, and the fixing method: can be fixed from three directions. Features ...

柔触/Rorobot 手指模块FM-A5V2 自重106g 柔触/Rorobot 手指模块FM-A5V2 自重106g

简介:柔触/Rorobot 手指模块FM-A5V2,特点及适用场景:独立安装,可配合SMP滑移安装板安装,指间距及角度可调,固定方式:可从四个方向固定(可选),进气方式:可从三个方向安装进气接头(可选) . ...

柔触/Rorobot 手指F-B3 负压行程10mm 柔触/Rorobot 手指F-B3 负压行程10mm

简介:柔触/Rorobot 手指F-B3   产品特点   手指材质可选择常规型,增强型[H]以及防静电型[AS]。   增强型材质[H]拥有更高的工作压力范围,夹持力**高达到常规材质手指的300%。   防 ...

柔触/Rorobot 手指模块C5V3 手指高度14mm 柔触/Rorobot 手指模块C5V3 手指高度14mm

简介:柔触/Rorobot 手指模块C5V3,特点及适用场景:独立安装,可配合SMP滑移安装板安装,指间距及角度可调。   产品特点   特点及适用场景:独立安装,可配合SMP滑移安装板安装,指间距及 ...

柔触/Rorobot 柔爪BMC-2076D5[P]/S 柔触/Rorobot 柔爪BMC-2076D5[P]/S

简介:柔触/Rorobot 柔爪BMC-2076D5/S   产品特点   正压状态指尖打开,真空状态夹紧,建议配合柔触空气驱动器使用,支持指尖距G可使用工作气压调节。   柔触材质分为常规型和无痕型, ...

柔触/Rorobot 手指模块FM-B5V2 模块宽度25mm 柔触/Rorobot 手指模块FM-B5V2 模块宽度25mm

简介:柔触/Rorobot 手指模块FM-B5V2 ,特点及适用场景:独立安装,可配合SMP滑移安装板安装,指间距及角度可调,固定方式:可从四个方向固定(可选),进气方式:可从三个方向安装进气接头(可选) ...

柔触/Rorobot 手指模块FM-B7V2 手指高度21mm 柔触/Rorobot 手指模块FM-B7V2 手指高度21mm

简介:柔触/Rorobot 手指模块FM-B7V2,特点及适用场景:独立安装,可配合SMP滑移安装板安装,指间距及角度可调,固定方式:可从四个方向固定(可选),进气方式:可从三个方向安装进气接头(可选)   ...

Rorobot BMC-20005V[P] External gripping blessing force 0-0.3N Rorobot BMC-20005V[P] External gripping blessing force 0-0.3N

Introduction:Rorobot Robot Soft Gripper BMC-20005V, B-20005V/S can be used well for 0.18mm-3mm between small and light and thin special-shaped workpieces, even if it is close to the plane, it can also do pinching and grabbing, to ensure that the surface of the product is flawless. For light and small, high blanking accuracy requirements and ...

柔触/Rorobot手爪 F4 双向抓取 抓取重量5g-800g 柔触/Rorobot手爪 F4 双向抓取 抓取重量5g-800g

简介:多指对向手爪具有超大抓取力度,可立卧双向抓取、适应性强、能完美解决悬挂零件抓取时晃动和定位偏差等问题。其材质柔软和可调节的抓取力度,便面了产品表面的划痕与破损。铝型材框架,安 ...

柔触/Rorobot  柔爪BMC-20603[H]/S 建议负载60g 柔触/Rorobot 柔爪BMC-20603[H]/S 建议负载60g

简介:柔触/Rorobot 柔爪BMC-20603[H]/S   产品特点   正压状态指尖打开,真空状态夹紧,建议配合柔触空气驱动器使用,支持指尖距D可使用工作气压调节。   柔触材质分为常规型[H]和无 ...

柔触/Rorobot 手指模块FM-A8V2 模块宽度31mm 柔触/Rorobot 手指模块FM-A8V2 模块宽度31mm

简介:柔触/Rorobot 手指模块FM-A8V2,特点及适用场景:独立安装,可配合SMP滑移安装板安装,指间距及角度可调,固定方式:可从四个方向固定(可选),进气方式:可从三个方向安装进气接头(可选)   ...

柔触/Rorobot 驱动器LCH-U 正压流量165L/min 柔触/Rorobot 驱动器LCH-U 正压流量165L/min

简介:柔触/Rorobot 驱动器LCH-U专为柔触夹爪设计的轻量驱动器,兼具正压和真空输出,可以应用于多路驱动和异步驱动   产品参数   输入气源   0.4—0.6MPa   流量>200L/min   输 ...

柔触/Rorobot 柔爪B-4H18[HAS]/S 柔触/Rorobot 柔爪B-4H18[HAS]/S

简介:柔触/Rorobot 柔爪B-4H18[H]/S   产品特点   正压状态指尖打开,负压状态夹紧,建议配合柔触空气驱动器使用,外撑指尖距D可使用工作气压调节。   柔爪材质分为常规型[H和无痕型[ ...

柔触/Rorobot 手指模块FM-B4V1 负压指间距44mm 柔触/Rorobot 手指模块FM-B4V1 负压指间距44mm

简介:柔触/Rorobot 手指模块FM-B4V1特点及适用场景:双指模块组合方式,结构紧凑,占用空间小.指间距及安装角度不可调节,适用于夹取微小、轻薄的工件.   产品特点   特点及适用场景:双指模 ...

CATEGORIES BYPASS
Customer Service Center

Online Consultation:QQ


ContactContact

Contact: Manager Huang

Contact QQ: 3271883383

Contact number: 13522565663


Scan the code to add WeChat (please save the picture first on the mobile phone)

working hoursworking hours

Weekdays: 9:00-17:00

Holidays: Only emergencies are handled

Contact us

Contact us

Contact number QQ consultation
QQ consultation

3271883383

Company address
Back to top