CHINT/CHINT Miniature Circuit Breaker NXB-63H has a frequency of 50Hz

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

Introduction: CHINT/CHINT NTNC2 series AC contactor AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz or 60Hz, rated working voltage to 690V, rated working current to 800A circuit, for long-distance connection and breaking of circuits, and can be used with appropriate ...

NL1E-63 residual current action circuit breaker (without overcurrent protection) is suitable for AC 50Hz, rated voltage at two poles 230V, four poles 400V, rated current to 63A line, when the person is electrocuted or the leakage current of the grid exceeds the specified value, the residual current action circuit breaker can be used in a very short time ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

NXBFLE-32 residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 32A in the line, play the role of overload, short circuit and leakage protection, can also be used as infrequent line on and off under normal circumstances. The product conforms to IEC61009-1, GB/T...

HZ12 series power cut-off switch is suitable for AC 50Hz or 60Hz, voltage to 550V circuit, as the power supply cut off and on. Comply with standards: GB/T 14048.3, IEC 60947-3. Ith A：40 Ui A：550 Ue V：380 Ie/A（AC-23A）： 40 ...

NX50 is a high-end distribution box newly developed by CHINT Research Institute, which is widely used in household indoor power distribution to ensure the safety of various indoor electrical facilities, including lighting, kitchen equipment, air conditioning and other equipment. It can also be used for office buildings, shopping mall decoration, etc. This article introduces CHINT/CHINT ...

SAK series is suitable for AC 50Hz or 60Hz, rated voltage to 800V, rated cross-sectional area of 2.5-70mm2 in power and control circuits, as wire connection. It is installed on TH35 rails. Comply with standards: GB/T 14048.7, IEC 60947-7-1. This article introduces CHINT ...

HZ10 series combination switch is mainly suitable for AC 50Hz or 60Hz, voltage 380V and below, DC voltage 220V and below the circuit, for manual infrequent connection or breaking of circuits, switching power supply or load, measuring circuits, can also control small capacity motors. Standards: G ...

The main function of OUVT-X3 over-under-voltage tripper: assembled with circuit breaker to achieve over-under-voltage protection Rated working voltage (Ue): AC 230V, 50Hz; Overvoltage action setting value (Uo): 280 (1+5%)V; Undervoltage action setting value: (35%-70%)Ue; Rated insulation ...

UVT-X3H under-voltage tripper is suitable for AC 50Hz, rated voltage 230V line, and NBH-125 series circuit breaker is used together, when the terminal voltage of the tripper is reduced to the under-voltage protection range, the tripper acts and drives the circuit breaker to automatically break, so as to realize the under-voltage protection of the line. ...

NH2-125 disconnector is mainly used as the main switch in the terminal combination electrical appliances, suitable for AC 50Hz, rated voltage to 400V in the power distribution and control circuit, can also be used to control motors, low-power electrical appliances and lighting, widely used in industrial and mining enterprises, high-rise buildings, commercial and household ...

ND9 signal light is suitable for AC 50Hz/60Hz, rated voltage up to 230V, DC voltage up to 230V circuit control system. It is used as an indication signal, preset signal, accident signal and other indication of telecommunications, electrical and other lines. Standards: GB/T 14048.5, IEC 60947-5-1 ...

NB8-40J miniature circuit breaker is mainly suitable for AC 50Hz, rated voltage to 415V, rated current to 40A in commercial office buildings, civil residential and general industrial terminal distribution lines, to provide overload, short circuit protection for the line, but also under normal circumstances for infrequent transfer of the line...

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz, rated working voltage up to 400V, rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect lines and power supply equipment from overload, short circuit, undervoltage and other faults. At the same time ...

DW17D series universal circuit breaker is suitable for AC voltage 400V (380V), 690V (660V), 50Hz, rated working current to 3900A power distribution network, used to distribute power and protect lines and power equipment from overload, undervoltage, short circuit and other hazards, under normal conditions, can also be used as ...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...

Rated current (In): 1A, 2A, 3A, 4A, 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A Rated working voltage (U): 230V-(1P, 1P+N), 400V-(2P-4P, 3P+N); Rated insulation voltage (Ui): 500V; Frequency: 50Hz Electromagnetic tripping ...

YBLX-WL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Accord with...

NP2 series button is suitable for AC 50Hz or 60Hz, rated working voltage to 415V and DC working voltage to 250V in industrial control circuits, as electromagnetic starters, contactors, relays and other electrical circuit control, with indicator light button is also suitable for light signal indication ...