Advantages of eddy-current displacement sensors – Turck

Torque sensors are generally used to measure the magnitude and direction of the driver's torque acting on the steering wheel and convert it into an electrical signal. The power steering ECU receives this signal and the vehicle speed signal, confirms the direction and size of the auxiliary power, and then reduces the steering torque when traveling at low speeds.

A pressure transmitter is a device that measures the pressure of a fluid or gas in a process and converts it into an electrical signal that can be used for monitoring or control purposes. Pressure transmitters have a few different operating principles to accomplish this: Piezoresistive pressure transmitters The first ...

1. Recognize the type of pressure sensor (1) Electromechanical: The internal mechanical structure of the product, the pressure sensor made of springs, levers, dispatching screws, metal housings, etc., and contact module equipment, does not contain processing circuits inside, and the output is the pressure switch side of the switching quantity.

Intelligent production is a popular category that the world attaches great importance to, and it is also the main direction of the transformation and upgrading of China's manufacturing industry. One of the important links is how intelligent logistics can serve intelligent production, and the equipment of production materials can be seamlessly connected with intelligent production. CeMAT is held under the theme of "Smart ...

1. It is forbidden to wire in the state of power on, and strictly wire according to the color on the wiring diagram. 2. The interval between the switch sensing surface and the measured body should be within 80 of the additional action interval to switch the operation firmly. 3. Adjacent switches are generally not suitable for series and parallel use, such as ...

　　Old model New model BL67-16DO-0.1A-P MC 0116 0101 　　BL 67-1RS232 MC 2501 0000 　　BL 67-1RS485/422 ...

1. The proximity sensor cannot confirm how far the distance between the detected objects is. 2. The switch is installed within the detection interval range, and the signal is sometimes absent (sometimes detectable, sometimes undetectable) in practice. 3. Practice the detection interval and the ...

The first is pressure, and the transmitter can't afford to lose it. In this case, check if the pressure connector is leaking or clogged, if not, check the wiring method and check if the power supply is normal, the brief pressure to confirm if the output has changed, or if there is an output at the zero point of the sensor ...

Carbon fiber composites are becoming increasingly important, especially in the automotive industry and its Tier 1 suppliers. The use of carbon fiber in industry has doubled in the last five years and is forecast to quadruple by 2030. A few years ago, products containing only carbon fiber were very small ...

1. According to the measurement target and measurement environment In order to carry out a detailed measurement work, it is necessary to first consider the principle of the sensor to choose, which needs to be analyzed and many elements can be confirmed. Because, even if the same physical quantity is measured, there are sensors with multiple principles to choose from.

Turck's TBEN-S-RFID block I/O modules are now available as a field logic controller Ahead of SPS IPC Drives 2017 (Industrial Automation in Nuremberg, Germany), Turck has expanded its TBEN-S-RFID ...

TURCK analog inductive sensors Turck's analogue inductive sensors enable simple monitoring and control tasks. The sensor is capable of supplying three analog output signals: voltage, current, and frequency. These signals are proportional to the displacement of the object being detected. Lose...

In what ways does the signal fail to manifest Allah? Why is the signal unstable? Generally, the output signal is unstable due to transient temperature changes that cause the bias voltage to fluctuate and fluctuate. How to deal with it? A sensor with a stable bias voltage is used for processing. ...

On June 27, 2018, Turck's Uprox series inductive sensors were awarded the "AI User Praise Award" at the 2018 (18th) Advanced Manufacturing Skills and Car Manufacturing Industry High-Level Forum and Award Ceremony. The award was selected by readers in the car industry, and it took several months to select ...

1. Understand the circuit principle and determine the maintenance plan: when the electrical system of a piece of equipment has shortcomings, do not rush to disassemble it, first of all, it is necessary to understand the phenomenon, pass, planning and reasons for the shortcomings of the electrical equipment. Understand the basic operating principle of the equipment and electrical system, and analyze the details of the equipment.

1. Attenuation of detection distance. The slip warp is made of iron, which is suitable for inductive sensor detection; The scale of the measured part of the slippery warp is slightly smaller than the scale of the standard test object, so there will be a certain attenuation. 2. On-site anti-disturbance ...

1. Determination mechanism The commonly used torsional strain gauge is attached to the ductile shaft to be measured with strain adhesive and forms a strain bridge, which supplies power to the strain bridge. The electrical signal of torsion on the elastic shaft is immediately determined. After the strain signal is enlarged, it is changed to the positive and negative parts of the torsional strain after the voltage/frequency change.

(1) Resistance shunt: practice is a resistance with a very small resistance value, when there is a current through, according to Ohm's law, the voltage occurs in the resistance, and the current is known according to the measured voltage value. The resistor shunt has high precision, fast response speed, low cost, simple use, defects, etc.

As a super city in western China, Chongqing is not only a charming "Internet celebrity city", but also the "largest" industrial city with 45 industrial zones. In order to further promote the digitalization of manufacturing enterprises in the western region and focus on local vertical industries, the digital upgrade of factories across the country has solved the problem of ...

(1) Stable power supply to the proximity sensor separately; (2) the response frequency is in the extra range; ​ (3) There is jitter in the process of object detection, resulting in exceeding the detection area; (4) Multiple probes are tightly connected to each other; ...