Introduction: Rorobot BMC-2015D5[P]/S
Features:
It can be installed in the Straight Inlet Connection Module [CM] series or the Test-Through Inlet Flange Connection Touch Group [FCM] series
Straight-through or side-intake options are available
The fingertip is open in the positive pressure state, and clamped in the negative pressure state, it is recommended to use it with the soft-touch air driver, and the fingertip distance G can be adjusted by working positive pressure
The soft beak B-2051D5[P]/S can be replaced separately
Product parameters
Tare weight: 0.9g
Maximum load: 20g
External gripping force: 0.2N
Maximum actuation frequency: 300 times/min
Accuracy range: 0.05mm
Safe working air pressure: 90kPa
Service life: 1,500,000 times
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.
This article introduces the BMC-2015D5[P]/S products, if you are interested in Rorobot Soft Touch, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
![柔触/Rorobot 柔爪BML-4G64[HAS]/S 建议负载2000g](https://www.76kj.cn/data/attachment/forum/202211/18/151840unxi1ccisbxncrn3.jpg)
|
柔触/Rorobot 柔爪BML-4G64[HAS]/S 建议负载2000g
简介：柔触/Rorobot 柔爪BML-4G64[HAS]/S
产品特点
正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距G可使用工作气压调节。
柔触材质分为常规型[H]和无 ...
|
![柔触/Rorobot 柔爪BMC-2076D5[P]/S](https://www.76kj.cn/data/attachment/forum/202209/01/171509n0kcb2xb8bwxwzzm.jpg)
|
柔触/Rorobot 柔爪BMC-2076D5[P]/S
简介：柔触/Rorobot 柔爪BMC-2076D5/S
产品特点
正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距G可使用工作气压调节。
柔触材质分为常规型和无痕型， ...
|
|
柔触/Rorobot 手指模块FM-A4V2 手指宽度24mm
简介：柔触/Rorobot 手指模块FM-A4V2，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调，固定方式:可从四个方向固定(可选)，进气方式:可从三个方向安装进气接头(可选) .
...
|
![柔触/Rorobot 机器人柔爪BMC-4B32[H]/S 建议负载50g](https://www.76kj.cn/data/attachment/forum/202305/30/175020pgz3px7rgp2cd2z7.jpg)
|
柔触/Rorobot 机器人柔爪BMC-4B32[H]/S 建议负载50g
简介：柔触/Rorobot 机器人柔爪BMC-4B32[H]/S
产品特点
正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，夹持指尖距G以及外撑指尖距D可使用工作气压调节。
柔爪材 ...
|
|
柔触/Rorobot 弹簧杆式法兰连接模块FCM-S01
简介：柔触/Rorobot 弹簧杆式法兰连接模块FCM-S01
产品特点
符合ISO9409．1：2004标准（即国标GB/T 14468一2006/），适配于市面上大部分机器人法兰
用于安装柔喙模块或轻型手爪 ...
|
![柔触/Rorobot 柔爪B-21413[PAS]](https://www.76kj.cn/data/attachment/forum/202206/09/163739h8yde8oob4wqsdbi.jpg)
|
柔触/Rorobot 柔爪B-21413[PAS]
简介：柔触/Rorobot 柔爪B-21413，它能抓电池，能抓螺丝，能抓摄像头模块，能抓杆件，还能抓香灰，它能很好的用于外径在8±8(mm)工件的抓取，在不更换夹具的前提下，根据不同种类的工件选择不同 ...
|
![柔触/Rorobot 柔爪FM-C4V5/LS1[HAS]](https://www.76kj.cn/data/attachment/forum/202209/26/172827xccf38qwmfqfbt8b.jpg)
|
柔触/Rorobot 柔爪FM-C4V5/LS1[HAS]
简介：柔触/Rorobot 柔爪FM-C4V5/LS1[HAS]
产品参数
正压行程：24.5mm
负压行程：16mm
安全工作气压：300kPa
建议负载：380g
自重：90g
我们以客户为中心的 ...
|
|
柔触/Rorobot 手指F-C3 指尖行程10.5mm
简介：柔触/Rorobot 手指F-C3
产品特点
手指材质可选择常规型，增强型[H]以及防静电型[AS]。
增强型材质[H]拥有更高的工作压力范围,夹持力**高达到常规材质手指的300%。
防 ...
|
|
柔触/Rorobot 手指模块FM-B6V2 手指宽度：18mm
简介：柔触/Rorobot 手指模块FM-B6V2，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调，固定方式:可从四个方向固定(可选)，进气方式:可从三个方向安装进气接头(可选)
...
|
![柔触/Rorobot 柔爪BMC-4BG64[P]/S 开合频率6次/秒](https://www.76kj.cn/data/attachment/forum/202304/10/143121w7mmyf9eyqq11nei.jpg)
|
柔触/Rorobot 柔爪BMC-4BG64[P]/S 开合频率6次/秒
简介：柔触/Rorobot 柔爪BMC-4BG64/S，B-4BG64/S 是一款外抓式柔爪，推荐夹持工件尺寸(28-50)mm,开合尺寸在（50.4-80）mm，适合抓取蒸蛋糕、包子、烧麦以及枣糕等这类柔软的食品，B-4BG64/S 是 ...
|
|
柔触/Rorobot 手指模块FM-A4V1 手指宽度24mm
简介：柔触/Rorobot 手指模块FM-A4V1，特点及适用场景:双指模块组合方式，结构紧凑，占用空间小。指间距及安装角度不可调节，适用于夹取微小、轻薄的工件。
产品特点
特点及适用场景: ...
|
|
柔触/Rorobot 手指模块C7V5 手指长度49mm
简介：柔触/Rorobot 手指模块C7V5，特点及适用场景:模块更轻薄，安装模块指间距**小仅有10mm,适合夹取微小，轻薄的工件。也可串联(使用螺丝配件包PK)使用，但与V4相比，每个手指都需要独立供气 ...
|
![柔触/Rorobot 柔爪BMC-3B12[H]/S](https://www.76kj.cn/data/attachment/forum/202208/16/173019ssn0ams5s0o1aenj.jpg)
|
柔触/Rorobot 柔爪BMC-3B12[H]/S
简介：柔触/Rorobot 柔爪BMC-3B12[H]/S
产品特点
正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距D可使用工作气压调节。
柔触材质分为常规型[H]和无痕 ...
|
|
柔触/Rorobot 手指模块C7V4 模块高度35mm
简介：柔触/Rorobot 手指模块C7V4，特点及适用场景:夹持力**大,可串联(使用螺丝配件包PK)使用并简化气管布置.多用于多条手指同时工作且工件间紧凑的场景,工件宽度一般大于50mm
产品特点
...
|
![Rorobot BMC-4H18[HAS]/S](https://www.76kj.cn/data/attachment/forum/202212/20/154522seav2tfee4eneyvw.jpg)
|
Rorobot BMC-4H18[HAS]/S
Introduction: Rorobot BMC-4H18[HAS]/S
Features:
The fingertips are open in the positive pressure state, clamped in the negative pressure state, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by using the external support fingertip distance D.
The soft claw material is divided into conventional type [H and no ...
|
![柔触/Rorobot 柔爪FM-C5V5/LS1[P] 自重29g](https://www.76kj.cn/data/attachment/forum/202301/17/155802p63adu441u6kutzg.jpg)
|
柔触/Rorobot 柔爪FM-C5V5/LS1[P] 自重29g
简介：柔触/Rorobot 柔爪FM-C5V5/LS1
产品特点
配合机械臂应对工厂中小批量，多批次的柔性产线，可**节约产线切换时间
柔触手爪**快开合速度300次/分钟，**高重复定位精度0.05 ...
|
|
柔触/Rorobot 手指F-A6 自重55g
简介：柔触/Rorobot 手指F-A6
产品特色
指底花纹及指尖形状:会影响对工件的包覆效果以及摩擦力。
如需定制仿形指底花纹或指尖形状，请联系客服人员。
手指材质可选择常规型 ...
|
|
柔触/Rorobot 手指模块B5V3 手指宽度18mm
简介：柔触/Rorobot 手指模块B5V3，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调。
产品特点
特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及 ...
|
|
柔触/Rorobot 手指模块C6V4 手指高度14mm
简介：柔触/Rorobot 手指模块C6V4,特点及适用场景:夹持力**大,可串联(使用螺丝配件包PK)使用并简化气管布置.多用于多条手指同时工作且工件间紧凑的场景,工件宽度一般大于50mm.
产品特点
...
|
|
柔触/Rorobot 手指模块C4V3 模块高度46mm
简介：柔触/Rorobot 手指模块C4V3，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调。
产品特点
特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及 ...
|
|
Contact
working hours
![Rorobot BMC-2015D5[P]/S The maximum load is 20g](https://www.76kj.cn/data/attachment/forum/202211/21/170058mcnnivw3iqyggdan.jpg)
![Rorobot BMC-2015D5[P]/S The maximum load is 20g](https://www.76kj.cn/data/attachment/forum/202211/21/170105sbcq79qhndxm873g.jpg)