Introduction: E+H/Endershaus Capacitive Limit Detection The Solicap FTI55 and Solicap FTI55 fully or semi-insulated rod probes can be used for the point detection of fine and coarse solids.
Features:
Ultra-rugged probes designed for demanding process conditions
Quick and easy calibration and commissioning at the touch of a button
With various certifications and approvals, it can be used in a wide range of applications.
Two levels of overvoltage protection to prevent electrostatic discharge of the tank.
Automatic adhesion compensation for granular solids with a tendency to agglomerate (under development)
Permanent self-monitoring of the electronics increases safety
Both rod sensor (semi-insulated) and cable sensor (semi-insulated or fully insulated) probes can be truncated, reducing inventory costs
Product parameters
Measuring principle
Solid capacitors
Features/Applications:
Fully insulated/semi-insulated cable probes are made with small/large solids
Calibration is simple
Suitable for abrasive media
The probe is extremely robust
peculiarity
Length of insulating segment
Automatic adhesion compensation
High lateral loads
Rugged probes
Power/Communications
19 ... 253V AC
10 ... 55V DC-PNP
19...253V AC or 10... 55V DC
8/16mA，11...36V DC
PFM
Three-wire system
Ambient temperature
-50...70°C
(-58...158°F)
Process temperature
-50... 180°C
(-58...356°F)
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces E+H/Endershaus Capacitive Limit Detection Solicap FTI55 products, if you are interested in E+H/Endershaus Capacitive Limit Detection, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus Capacitive Limit Detection Solicap FTI56
Introduction: E+H/Endershaus Capacitive Limit Detection Solicap FTI56, Solicap FTI56 fully insulated or semi-insulated cable probes are rugged for the detection of fine and coarse solids. With its automatic adhesion compensation, the probe offers the highest measurement yield.
|
|
E+H/Endershaus Modular RTD Thermometer TR25
Introduction: E+H/Endershaus Modular RTD Thermometer TR25, the thermometer is mainly used in the chemical industry, but also for other industrial applications. Head-mounted transmitter-mounted devices are ready-to-use, enhancing measurement accuracy and reliability compared to directly connected sensors. Multiple processes ...
|
|
E+H/Endershaus casing TA556 insertion depth 5 mm
Introduction: E+H/Endershaus casing TA556, because of the harsh process conditions, the strength of the protective casing must be precisely calculated. Coloring penetration testing, ultrasonic testing, helium leak testing, pressure durability testing, and various non-destructive material tests to prove the quality of materials and processes ...
|
|
E+H/Endershaus hydrostatic level gauge Deltapilot FMB51 has a turndown ratio of 100:1
Description: E+H/Endershaus Hydrostatic Level Gauge Deltapilot FMB51, Deltapilot FMB51 rod sensor with CONTITE measuring cell with fixed process connection, mainly used in the environmental protection industry, for measuring the level of liquids or slurry media in open or closed containers ...
|
|
E+H/Endershaus differential pressure transmitter Deltabar FMD77 Range: 100 mbar – 16 bar
Description: E+H/Endershaus differential pressure transmitter Deltabar FMD77 with metal sensor, single flange diaphragm seal, or double flange seal, with capillary tube on the low pressure side. It is mainly used for continuous level measurement in the process industry. Built-in HistoROM data module for convenient processes and equipment ...
|
|
E+H/Endershaus Protective Sleeve for Temperature Sensor TW11 Insertion depth 4 mm
Introduction: E+H/Endershaus Temperature Sensor Protective Sleeve TW11, this metal protective sleeve is an important component for temperature measurement points in almost all industrial processes, especially in the fine chemical industry. It protects the measuring cell or sensor element from corrosion by the process medium and prevents the temperature sensor from being ...
|
|
E+H/Endershaus Modular thermocouple thermometer TC13
Description: The E+H/Endershaus Modular Thermocouple Thermometer TC13 is a highly modular, rugged thermometer for almost all industry applications. Compatible with all common communication protocols, the head-mounted transmitter is ready-to-use, with enhanced ...
|
|
E+H/Endershaus mass flow meter Proline Promass O 500 liquid ± 0.0005g/cm3
Description: The E+H/Endershaus mass flow meter Proline Promass O 500 is suitable for the oil and gas industry and provides high-precision measurement of liquids and gases at the highest process pressures. The sensor is perfectly suited for offshore conditions and is resistant to stress corrosion fracture. Promass O 500's ...
|
|
E+H/Endershaus thermocouple thermometer TEC420
Introduction: The E+H/Endershaus thermocouple thermometer TEC420 is a highly modular, rugged thermometer for almost all industry applications.
Features:
Modular design, standard junction box in accordance with DIN EN 50446 and customer-specified immersion lengths, flexible ...
|
|
E+H/Endershaus Radar measures travel time principle Micropilot FMR57
Introduction: E+H/Endershaus Radar Measurement Journey Time Principle Micropilot FMR57, Micropilot FMR57 sensor meets the highest requirements for level measurement of bulk solids and is suitable for level measurement in tall silos, coal bunkers or stockpiles.
Features:
Hardware and ...
|
|
E+H/Endershaus Temperature Sensor Protective Sleeve TA414 Insertion depth 4000mm
Introduction: E+H/Enderhaus Temperature Sensor Protective Sleeve TA414, the sheath is used in conjunction with RTD (resistive) thermometers such as Enderhaus TST414 to protect the working elements from chemicals. The thermometer is secured with locking screws on the sheath tube, making it easy to replace the thermometer. Cause...
|
|
E+H/Endershaus Tuning Fork Level Meter FTL20-0220 Limit Level Detection Switch
Product introduction: FTL20-0220 is an all-in-one limit detection switch. Typically used in tank farms, vessels and pipelines, in cleaning and filtration systems and cooling and lubrication tanks, for overfill protection or to prevent pumps from running dry.
Tuning fork level meter FTL20-002B
...
|
|
E+H/Endershaus Conductivity Limit Detection Single-Rod, 11375Z, Minimum Conductivity: 20μS/cm
Introduction: E+H/Endershaus Conductivity Limit Detection Single Pole Probe 11375Z, 11375Z Economical Probe can be used for limit level detection of a wide range of liquids in process and storage tanks
Features:
For the measurement of high-temperature liquids (e.g. 100°C), a cooler is available
The length of the probe can be truncated ...
|
|
E+H/Endershaus analogue chlorine sensor CCS51
Introduction: E+H/Endershaus Analog Chlorine Sensor CCS51, CCS51 Chlorine Sensor is robust and low-maintenance. The sensor provides high-precision measurement in drinking water, pool water and process water with high long-term stability; Stable monitoring of the disinfection process even under low flow conditions.
...
|
|
E+H/Endershaus Capacitive Limit Switch Nivotester FTC325
Introduction: E+H/Endershaus Capacitive Limit Switches Nivotester FTC325, Nivotester FTC325 Capacitive Limit Switches, with intrinsically safe signal circuits. The all-in-one housing allows for easy installation on standard DIN rails in the instrument cabinet.
Features:
Root...
|
|
E+H/Endershaus digital conductivity sensor Condumax CLS16D with IP68 degree of protection
Description: E+H/Endershaus Digital Conductivity Sensor Condumax CLS16D, Condumax CLS16D is a high-end digital conductivity sensor with hygienic approval. It has high measurement accuracy and reliable output of measured values, helping users to optimize their processes and improve product quality. ...
|
|
E+H/Endershaus Liquid Tuning Fork Level Limit Switch FTL260-0010
Product Introduction: Liquiphant is a liquid limit switch for storage tanks, tanks with agitators and pipelines. It can be used as a substitute for float switches in situations of accumulation, disturbance, liquid flow and air bubbles.
FTL260-0010
[0 ...
|
|
E+H Proline Promass X 500 Measuring range 0... 4100t/h
Description: The E+H/Endershaus mass flow meter Proline Promass X 50 features a patented four-tube measuring tube with Premium measurement accuracy (0.05 %) and maximum flow capacity, providing excellent performance in coastal/offshore applications in the oil and gas industry. With the innovative split transmitter ...
|
|
E+H/Endershaus Capacitive Limit Detection Liquicap FTI52
Introduction: E+H/Endershaus Capacitive Point Level Detection Liquicap FTI52, Liquicap FTI52 uses a cable probe for point level detection of high viscosity and sticky liquids, as well as interface and foam detection of conductive liquids.
Features:
By pressing the ...
|
|
E+H/Endershaus Gauge Pressure Transmitter Cerabar PMP51 Measurement Accuracy: 0.15%
Description: E+H/Endershaus Gauge pressure transmitter Cerabar PMP51, a digital pressure transmitter with a metal diaphragm, is mainly used for pressure, level, volume and mass measurement of liquids or gases in the process and hygiene industries. PMP51 is designed for high-voltage measurement applications, with a maximum working pressure of ...
|
|
Contact
working hours
