Description: E+H/Endershaus Digital Conductivity Sensor Condumax CLS16D, Condumax CLS16D is a high-end digital conductivity sensor with hygienic approval. It has high measurement accuracy and reliable output of measured values, helping users to optimize their processes and improve product quality. With multiple approvals and a wide range of hygienic process connections, it meets the actual process requirements. The Condumax CLS16D is not the latest generation of Memosens sensors. The new generation of Memosens CLS16E sensors has been upgraded with features
Features:
High-precision and precise measurements
Hygienic design with EHEDG test
Multiple biocompatibility approvals to meet USP Cl. VI and FDA (wetted parts) approvals
Resistant to steam sterilization and autoclaving processes
The precision cell constant is documented in the quality certificate
Recording and saving of sensor parameters for easy traceability and predictive maintenance
Convenient maintenance strategy for easy sensor calibration and management with Memobase Plus
Product parameters
Measuring principle
Electrical conductivity
apply
Pharmaceutical industry, pure and ultrapure water
peculiarity
Hygienic two-electrode conductivity sensor
Measuring range
k=0.1：0.04...500 µS/cm
Measuring principle
Conductive conductivity sensors
devise
Hygienic two-electrode conductivity sensor with two coaxially mounted electrodes, electropolished stainless steel and FDA sealing material; High-temperature disinfection
Material
Isolation: PEEK
Electrode: polished stainless steel 1.4435
Seal: Isolast (FFKM), FDA approved material
Dimensions
Diameter: 17 mm
(0.66 inch) length: 54 mm
2.10 inch)
Process temperature
up to 100°C (140°C/30 min)
Up to 212°F (284°F/30 min.)
Process pressure
max. 12 bar, 20°C
(174 psi，68°F)
Temperature sensor
NTC
connect
Process connections: Varivent, Neumo, clamps
Cable: Memosens connector
Ingress protection
IP68
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus digital conductivity sensor Condumax CLS16D product, if you are interested in E+H/Endershaus digital conductivity sensor, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus Ultrasonic Level Measuring Instrument FMU30-AAHEABGHF 4-20 mA
Product introduction: The FMU30-AAHEABGHF all-in-one ultrasonic level measuring instrument is used for non-contact level measurement of liquids, slurries and solids. The sensor emits an ultrasonic pulse signal directly to the surface of the medium. The pulse signal is reflected on the surface of the medium, and the reflected signal is received by the sensor. Ceremony...
|
|
E+H/Endershaus Modular RTD Thermometer TR12
Introduction: The E+H/Endershaus modular RTD thermometer TR12 is a highly modular, rugged thermometer for almost all industry applications. Compatible with all common communication protocols, the head-mounted transmitter is ready-to-use, with enhanced ...
|
|
E+H/Endershaus Mass Flow Meter Proline Cubemass C 500 range 0-1000kg/h
Description: The E+H/Endershaus mass flow meter Proline Cubemass C 500 is ideal for measuring very small flow rates in the field of skid-mounted, test benches and industrial robots. Even under high pressure conditions and changing flow rates, the measurement accuracy is not affected at all. Cubemass C 50 ...
|
|
E+H/Endershaus Radar measures travel time principle Micropilot FMR54
Introduction:E+H/Endershaus Radar Measurement Travel Time Principle Micropilot FMR54, Micropilot FMR54 is mainly used for liquid level measurement in high temperature and high pressure occasions, and its specially designed flat panel antenna is especially suitable for liquid level measurement with waveguide installation.
Features:
...
|
|
E+H/Endershaus Mass Flow Meter Proline Promass H 300 Range: 0 – 70,000 kg/h
Description: The E+H/Endershaus mass flow meter Proline Promass H 300 is designed for highly corrosive applications and ensures maximum safety for the measurement of chemically corrosive fluids. The all-in-one transmitter Promass H 300 offers a high degree of flexibility in terms of operation and system integration: single-ended access ...
|
|
E+H/Endershaus digital pH/ORP combination electrode Memosens CPS96E with a diameter of 12 mm
Introduction: E+H/Endershaus Digital pH/ORP combination sensor Memosens CPS96E, Memosens CPS96E is the specialist for the measurement of fibrous media or media with high suspended solids concentrations (e.g. dispersions, precipitants, emulsions). Open-cell diaphragm design, no risk of contamination, ensure reliable p...
|
|
E+H/Endershaus Ammonia Nitrogen Analyzer Liquiline System CA80AM
Introduction: E+H/Endershaus Ammonia Analyzer Liquiline System CA80AM, Liquiline System CA80AM for high-precision ammonia nitrogen measurement at all critical control points. As a member of the Liquiline platform, it is plug-and-play and easy to upgrade to a measuring station - ...
|
|
E+H/Endershaus Mass Flow Meter Proline Promass P 500 Measuring Tube 316L
Description: The E+H/Endershaus mass flow meter Proline Promass P 500 is a specialist in aseptic processes in the life sciences and is specifically designed for biotechnology applications that require the highest compliance. The Promass P 500 is equipped with an innovative split transmitter that maximizes the use of demanding ...
|
|
E+H/Endershaus Thermal mass flow meter Proline t-mass F 300
Description: E+H/Endershaus Thermal mass flow meter Proline t-mass F 300, t-mass F with patented sensor design for in-line mass flow measurement based on the thermal mass principle with high measurement stability. It effectively compensates for changes in process conditions in real time: temperature ...
|
|
E+H/Endershaus Capacitive Limit Detection Solicap FTI77 Safety Certified SIL
Introduction: E+H/Endershaus Capacitive Limit Detection Solicap FTI77, Solicap FTI77 Semi-Insulated Sword/Cable Probe for Limit Detection of Fine and Coarse Solids
Features:
Ultra-rugged probes designed for demanding process conditions
Pass...
|
|
E+H Proline Promass F 500 Liquid error ± 0.10%
Introduction: The E+H/Endershaus mass flow meter Proline Promass F 500 is a proven, high-precision sensor. It is not affected by fluctuations and harsh environments, and is widely used. Combined with the innovative split transmitter, the Promass F 500 is the most ...
|
|
E+H/Endershaus vortex flowmeter Proline Prowirl R 200
Introduction: The E+H/Endershaus vortex flowmeter Proline Prowirl R 200, Prowirl R is designed for small flow rates and is a reliable energy management solution. In addition, its calibration option, PremiumCal, ensures high measurement accuracy and thus maximizes plant efficiency. P ...
|
|
E+H/Endershaus thermometer MultiSens Slim iTHERM TMS21
Description: The E+H/Endershaus thermometer MultiSens Slim iTHERM TMS21 is designed for use in applications that require a small size and light weight. The TMS21 adopts a modular design that flexibly meets the user's customized requirements. Only one process connection is needed to monitor the entire ...
|
|
E+H/Endershaus Mass Flow Meter Proline Promass E 500 Measuring Tube 1.4539
Description: The E+H/Endershaus mass flow meter Proline Promass E 500 is a robust and cost-effective solution for long-term use for high-precision liquid and gas measurements in a wide range of standard applications in different industries. In combination with the innovative split transmitter, ...
|
|
E+H/Endershaus ultrasonic level sensor FMU44 temperature sensor
Product Introduction: All-in-one measuring transmitter for non-contact level measurement of liquids, slurries and lumps Pros Menu-based on-site operation with four-line plain text display for quick and easy instrument commissioning in 7 languages Field envelope display for easy instrument failure
|
|
E+H/Endershaus Mass Flow Meter Dosimass Maximum process pressure PN40
Description: E+H/Endershaus Dosimass mass flow meter for flow measurement during dosing and bottling. Volumetric and mass flow with temperature and density compensation can be directly measured to ensure maximum repeatability. Dosimass is suitable for measurement occasions where space is limited, and it is a system ...
|
|
E+H/Endershaus Mass Flow Meter Proline Promass A100 Liquid error ±0.1%
Introduction: E+H/Endershaus Proline Promass A100 can be used for accurate measurement of small flow liquids and gases in high and low pressure applications, and can be used with the smallest transmitter available.
|
|
E+H/Endershaus Conductive Limit Detection Three-rod Probe 11363Z
Introduction: E+H/Endershaus Conductive Limit Detection Three-Pole Probe 11363Z, 11363Z High Corrosion Resistance Probe, can be used for limit level detection and overflow protection in plastic or non-conductive containers.
Features:
Various process connections are available: Thread G1 1/ ...
|
|
E+H/Endershaus Liquiphant FTL50
Introduction: E+H/Endershaus Liquiphant FTL50 and Liquiphant FTL50 tuning fork limit detection switches can be used in explosion hazard areas, with various international approvals, suitable for all industries.
Features:
Available for functional safety ...
|
|
E+H/Endershaus Capacitive Limit Detection Minicap FTC262 Maximum tensile strength 3000N
Introduction: E+H/Endershaus Capacitive Limit Detection Minicap FTC262, Minicap FTC262 cable probe is simple and economical for solid bulk material limit detection, especially for corrosive or large amounts of adhesion formed media. This probe is designed for lightweight, solid, ...
|
|
Contact
working hours
