Description: E+H/Endershaus Digital ORP Electrode Memosens CPS12E, Memosens CPS12E is an all-rounder digital ORP electrode. Reliable measurement in harsh conditions or in hazardous locations.
Features:
The ORP electrode is robust and low-maintenance: the large area is stain-resistant PTFE diaphragm to avoid contamination by the medium. Long toxic diffusion path to avoid toxic diffusion of the reference electrode.
Suitable for severe applications: gold electrodes for oxidizing media, platinum electrodes for reducing media. Glass electrode for strong chemical stability. The sensor is stable at a process pressure of no more than 17 bar (246.5 psi).
Memosens 2.0 enables a large number of calibration and process parameters to be stored in the sensor. Service IIoT IIoT and Predictive Maintenance Strategies.
Thanks to the non-contact, inductive signal transmission, the measurement results are very reliable and the process is safer.
Allows for laboratory sensor calibration, fast sensor replacement in the field, and minimizes production downtime and reduces cost of ownership
Product parameters
Measuring principle
ORP electrodes
apply
in stable process conditions
Long-term monitoring and limit control are carried out in the process of water treatment
peculiarity
Digital ORP sensor for process
Standard application in technical and environmental engineering with dust-proof PTFE junction and integrated temperature sensor
Measuring range
-1500 mV to +1500 mV
Measuring principle
Gel compact electrode with Teflon junction and dual gel reference
, the measuring part is a gold needle or a platinum ring
devise
All shaft lengths are equipped with temperature sensors
Advanced gel technology
Material
Sensor shaft: suitable for the process
Glass ORP measuring cell: platinum or gold
Metal leads: Ag/AgCl
Aperture: Annular PTFE diaphragm, available
Sterilized O-Rings: FKM
Process coupling: PPS glass fiber reinforced
Nameplate: Ceramic metal oxide
Dimensions
Diameter: 12 mm (0.47 inch)
Shaft lengths: 120, 225 and 360 mm
(4.72, 8.86, and 14.17 inches)
Process temperature
-15 to 135 °C
(5 to 275 °F)
Process pressure
0.8 to 17 bar (11.6 to 246.5 psi) absolute
Temperature sensor
COVID 30K
Explosion-proof certification
ATEX, IECEx, CSA C/United States, NEPSI, Japan explosion-proof and Inmeto certified, suitable for:
Hazardous Area 0, Zone 1, and Zone 2
connect
Inductive digital connectors with Memosens 2.0 technology
Ingress protection
IP68 rating
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus digital pH electrode Memosens CPS31E product, if you are interested in the principle of ultrasonic measurement travel time, please also contact our staff, we look forward to your call, we hope that our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus Liquiphant FTL50
Introduction: E+H/Endershaus Liquiphant FTL50 and Liquiphant FTL50 tuning fork limit detection switches can be used in explosion hazard areas, with various international approvals, suitable for all industries.
Features:
Available for functional safety ...
|
|
E+H/Endershaus Electronic Vibrating Limit Detection Soliphant FTM50
Introduction: E+H/Endershaus Electronic Vibrating Limit Detection Soliphant FTM50, Soliphant M is a rugged tuning fork limit level detection switch for solid fines or low-density loose solid powders in silos. It is widely used and has passed the dust, flammable gas, etc.
|
|
E+H/Endershaus Capacitive Level Measurement Liquicap FMI51
Introduction: E+H/Endershaus Capacitive Level Measurement Liquicap FMI51, the Liquicap FMI51 is a fully insulated rod probe capable of level monitoring in a wide range of liquids, even in adherent-prone media and at very high temperatures.
Features:
Accord with...
|
|
E+H/Endershaus pH/ORP combination electrode Memosens CPS76D is IP68 rated
Description: E+H/Endershaus Digital pH/ORP Combination Sensor Memosens CPS76D, Memosens CPS76D sensor enables simultaneous pH and ORP measurement in harsh and hygienic applications, improving process control and product quality.
Features:
Same...
|
|
E+H/Endershaus Radar measures travel time principle Micropilot FMR52
Introduction: E+H/Endershaus Radar Measurement Travel Time Principle Micropilot FMR52, Micropilot FMR52 uses a flush horn antenna made of integral PTFE material, which has excellent corrosion resistance advantages and is used for level measurement of highly corrosive liquids. The FMR52 sensor passed the ASM...
|
|
E+H/Endershaus Conductive Limit Detection Single Rods Probe 11961Z
Introduction: E+H/Endershaus Conductive Limit Detection Single Rod Probe 11961Z, 11961Z High Corrosion Resistance Probe Body and Insulation Layer are made of anti-corrosion materials and can be used for corrosive media measurement. The insulation is made of ceramic and can be used in steam boilers.
Features:
Pole...
|
|
E+H/Endershaus module TT131 with a maximum process pressure of 100 bar
Description: The E+H/Endershaus module TT131 is designed according to DIN 43772 and is resistant to most operating conditions. Made from tubes or rods, available in a variety of diameters and materials.
Features:
Modular construction according to DIN 43772
iTH ...
|
|
E+H/Endershaus digital conductivity sensor Memosens CLS15E
Introduction: E+H/Endershaus Digital conductivity sensors Memosens CLS15E, Memosens CLS15E conductivity sensors are particularly suitable for low conductivity measurements such as boiler feed water and chip cleaning. Even in hazardous areas, conductivity sensors reliably measure high-precision ...
|
|
E+H/Endershaus Liquiphant FTL33 vibrating limit level detection
Description: E+H/Endershaus Vibrating Limit Detection Liquiphant FTL33, Liquiphant FTL33 Liquid Limit Switches are specially designed for the hygienic food and beverage industry. Liquiphant is particularly suitable for overflow protection or pump idling in storage tanks, mixing tanks and pipelines
|
|
E+H/Endershaus High Temperature Thermocouple Thermometer TAF11
Introduction: E+H/Endershaus High-temperature thermocouple thermometer TAF11, the measuring point with extremely high process temperatures requires the thermometer to be equipped with a ceramic sheath tube and thermocouples made of special metals such as platinum and rhodium. The special material sheath protects the working elements in the measuring process against mechanical damage or chemical ...
|
|
E+H/Endershaus TM311 - Pt100 thermometer
Product Introduction: E+H/Endershaus TM311 - Pt100 Thermometer Compact RTD thermometer for accurate and fast measurements, IOLink, suitable for aseptic applications
Advantage:
• Quick installation and easy commissioning: - Solid stainless steel, compact and compact structure - M12 connection, IP69 ...
|
|
E+H/Endershaus Capacitive Limit Detection Solicap FTI55
Introduction: E+H/Endershaus Capacitive Limit Detection The Solicap FTI55 and Solicap FTI55 fully or semi-insulated rod probes can be used for the point detection of fine and coarse solids.
Features:
Ultra-rugged probes designed for demanding process conditions
...
|
|
E+H Electromagnetic Flowmeter Proline Promag 10H ±0.5%
Introduction: The E+H/Endershaus electromagnetic flowmeter Proline Promag 10H is used in a wide range of applications in the most demanding food, beverage and life sciences industries. Combined with the Promag 10 transmitter, which meets the basic application and is capable of direct integration, the Promag 10H offers precise ...
|
|
E+H/Endershaus Cubemass DCI Medium temperature –50...+200 °C
Introduction: The E+H/Endershaus Cubemass DCI is a reliable mass flow meter that can be used to measure minimum flow rates in skid-mounted, test bench and industrial robot applications (e.g. painting, surface finishing, etc.). Even when measuring under high pressures and flow rate variations, the accuracy is not compromised.
|
|
E+H/Endershaus Explosion-proof thermocouple thermometer TC66
Introduction: E+H/Endershaus Explosion-proof thermocouple thermocouple thermometer TC66, this thermocouple thermometer is rugged and suitable for harsh working conditions and high safety requirements in chemical, oil, gas, energy and other industries. Robust protective tubes and special materials are designed to handle harsh work ...
|
|
E+H/Endershaus Modular RTD Thermometer TR24
Introduction: The E+H/Endershaus modular RTD thermometer TR24 is a highly modular, rugged thermometer for almost all industry applications. Compatible with all common communication protocols, the head-mounted transmitter is ready-to-use, with enhanced ...
|
|
E+H/Endershaus Ultrasonic Measurement Stroke Time Principle Prosonic FMU30 Communication 4... 20mA
Description: E+H/Endershaus Ultrasonic Measuring Stroke Time Principle Prosonic FMU30 for applications in wastewater treatment plants, process water storage tank loading, and level monitoring in storage and buffer tanks. FMU30 provides mature software algorithms, four lines of plain text display of reminders and alarm messages...
|
|
The E+H/Endershaus analogue conductivity sensor Condumax CLS13 is IP67 rated
Introduction: E+H/Endershaus Analog conductivity sensor Condumax CLS13, Condumax CLS13 is a stable conductivity sensor that can be used for the measurement of steam/water circulation systems in power plants, especially for low conductivity (high temperature and high pressure) measurements, to ensure that the process is not corroded.
|
|
E+H/Endershaus Smartec CLD134 compact conductivity measuring instrument
Description: E+H/Endershaus The Smartec CLD134 is a compact conductivity measuring instrument for the food, beverage and life sciences sectors. The compact design of the integrated sensors and transmitters is interference-free and easy to use. System...
|
|
E+H/Endershaus temperature transmitter iTEMP TMT82 HART® 7
Description: The E+H/Endershaus temperature transmitter iTEMP TMT82 HART® 7 meets the high availability requirements of industrial processes with high reliability, measurement accuracy and long-term stability. Dual-channel transmitters are used in a wide range of applications to feed universal sensors such as thermocouples or RTDs.
|
|
Contact
working hours
