Introduction: E+H/Endershaus Digital conductivity sensors Memosens CLS15E, Memosens CLS15E conductivity sensors are particularly suitable for low conductivity measurements such as boiler feed water and chip cleaning. Even in hazardous areas, conductivity sensors reliably provide high-precision measurements. The CLS15E with Memosens 2.0 digital technology supports extended data storage and storage of calibrations, settings and process parameters, making it the perfect basis for implementing predictive maintenance and advancing IIoT technology.
Features:
Low maintenance, long service life and very cost-effective sensors.
The sensor is resistant to autoclaving and can be installed on a sterile unit.
The geometrically symmetrical distribution of the electrodes of the Memosens CLS15E enables the output of highly accurate low conductivity measurements.
The sensor cell constant is indicated on the quality certificate, which allows precise adjustment of the measuring point.
IIoT support: Memosens 2.0 supports extended data storage, storage of calibration and process parameters, and better trend identification, making it the perfect basis for implementing predictive maintenance and advancing IIoT technology.
The non-contact inductive signal transmission method provides a high level of process safety.
Product parameters
Measuring principle
Electrical conductivity
apply
Pure and ultrapure water range
Measurement of ion exchanger monitoring
reverse osmosis
Distillation and chip cleaning
peculiarity
Digital 2-electrode conductivity sensor
Measuring range
k=0,01: 0.04 to 20 μS/cm
k=0,1: 0.10 to 200 μS/cm
Measuring principle
Conductive cell with electropolished stainless steel electrodes
devise
2-electrode conductivity cell with coaxially aligned electrodes, electropolished
Material
Electrode: stainless steel 1.4435
Electrode shaft: PES
Dimensions
Electrode diameter: 16 mm (0.63 in.)
Electrode length: approx. 55 mm (2.17 inches)
Process temperature
Threads with fixed cables:
-20 to 100 °C (-4 to 212 °F)
Thread with plug-in head:
-20 to 120 °C (-4 to 248 °F.)
140 °C (284 °F) for 30 min
Process pressure
13 bar at 20 °C (188 psi at 68 °F) absolute
1 bar at 120 °C (14 psi at 248 °F) absolute
Temperature sensor
Platinum 1000
Explosion-proof certification
ATEX、NEPSI、CSA、IECEx、INMETRO、EAC Ex
connect
Process: 1/2" & 3/4" NPT, Clamp 1 1/2"
Sensor connection: Inductive digital connector with Memosens 2.0 technology
Ingress protection
IP68
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus digital conductivity sensor Memosens CLS15E product, if you are interested in E+H/Endershaus word conductivity sensor, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus Hydrostatic Level Gauge Deltapilot FMB50 0.2% Accuracy
Description: The E+H/Endershaus hydrostatic level gauge Deltapilot FMB50 is an integrated transmitter with an anti-condensation Contite measuring cell, mainly used in the process and hygiene industries for measuring the level of liquids or slurry media in open or closed containers.
|
|
E+H/Endershaus Liquiphant FTL71 Classification GL/ABS
Introduction: E+H/Endershaus Liquiphant FTL71 and Liquiphant FTL71 tuning fork limit detection switches can be used in explosion hazard areas and have obtained various international approvals.
Features:
Can be used for functional safety level SIL2/SIL3 ...
|
|
E+H/Endershaus Electromagnetic Flowmeter Proline Promag 10D Medium temperature 0...+60 °C
Description: The E+H/Endershaus electromagnetic flowmeter Proline Promag 10D has a clamp-on design for use in very confined spaces. It is the first choice for basic applications in the water industry. In combination with the cost-effective Promag 10 transmitter, the Promag 10D is the perfect solution for liquid measurement in a wide range of applications.
|
|
E+H/Endershaus Hydrostatic Level Gauge Cerabar PMP21 Measurement accuracy 0.3%
Description: The E+H/Endershaus hydrostatic level gauge Cerabar PMP21 is the most cost-effective, ultra-compact pressure transmitter. With piezoresistive sensors, the absolute or gauge pressure measurement range is 400 mbar. 400 bar。 The PMP21 can be measured under the harsh operating conditions of the process industry, ...
|
|
E+H/Endershaus four-channel transmitter Liquiline CM444 IP66 / IP 67
Introduction: E+H/Endershaus four-channel transmitterLiquiline CM444 digital multiparameter measuring transmitter for all types of process monitoring and control. Modular structure, easy to expand. The four-channel controller enables seamless system integration, simple operation, reduced spare parts storage, and time-saving.
|
|
E+H Proline Promass O 300 0-800000kg/h
Description: The E+H/Endershaus mass flow meter Proline Promass O 300 is designed for high-precision liquid and gas measurement at the highest process pressures in the oil and gas industry, is robust and corrosion-resistant, and is fully compliant with the requirements of offshore/inland applications. The Promass O 300 is equipped with a safe ...
|
|
E+H/Endershaus Universal Dissolved Oxygen Measurement Transmitter Liquisys COM253
Description: The E+H/Endershaus universal dissolved oxygen measurement transmitter Liquisys COM253, the Liquisys COM253 standard transmitter can be used with the COS41 and COS61 dissolved oxygen measurement sensors.
Features:
Increased operational safety: Continuous process checks ...
|
|
The E+H/Endershaus ultrasonic level sensor FMU90 has a measuring range of 70 m
Product Introduction: For use with FDU91/91F/92/93/95/96 series ultrasonic sensors, with field housing or DIN rail mounting housing Pros Simple menu-guided operation with 6-line plain text display, available in 15 languages Envelope display for quick and easy fault ...
|
|
The E+H/Endershaus PAH sensor CFS51 is IP68 rated
Introduction: E+H/Endershaus PAH sensor CFS51, the robust and low-maintenance Memosens CFS51 fluorescence sensor measures polycyclic aromatic hydrocarbons (PAHs) according to MEPC.259(68) and MEPC.340(77) standards.
Features:
Unique...
|
|
E+H/Endershaus Capacitive Limit Detection Solicap FTI77 Safety Certified SIL
Introduction: E+H/Endershaus Capacitive Limit Detection Solicap FTI77, Solicap FTI77 Semi-Insulated Sword/Cable Probe for Limit Detection of Fine and Coarse Solids
Features:
Ultra-rugged probes designed for demanding process conditions
Pass...
|
|
E+H/Endershaus casing TA550 insertion depth 5 mm
Introduction: E+H/Endershaus casing TA550, because of the harsh process conditions, the strength of the protective casing must be precisely calculated. Coloring penetration testing, ultrasonic testing, helium leak testing, pressure durability testing, and various non-destructive material tests to prove the quality of materials and processes ...
|
|
E+H/Endershaus Protective Sleeve for Temperature Sensor TW11 Insertion depth 4 mm
Introduction: E+H/Endershaus Temperature Sensor Protective Sleeve TW11, this metal protective sleeve is an important component for temperature measurement points in almost all industrial processes, especially in the fine chemical industry. It protects the measuring cell or sensor element from corrosion by the process medium and prevents the temperature sensor from being ...
|
|
E+H/Endershaus digital conductivity sensor Memosens CLS16E with IP68 degree of protection
Description: E+H/Endershaus Digital conductivity sensor Memosens CLS16E, Memosens CLS16E is a high-end conductivity sensor with FDA and USP Cl. VI hygienic approvals and reliable output of high-precision measured values that help to optimize processes and improve product quality.
...
|
|
E+H/Endershaus digital pH electrode Ceragel CPS71D
Introduction: E+H/Endershaus digital pH sensor Ceragel CPS71D, Ceragel CPS71D digital pH sensor for reliable measurement in harsh conditions and hygienic applications.
Features:
The electrode is highly corrosion-resistant and is capable of measuring strong acids, bases, and high concentrations.
|
|
E+H/Endershaus RTD Thermometer TST602
Description: The E+H/Endershaus RTD thermometer TST602 can be installed quickly and easily directly on the wall of a pipe or vessel without the need for a process connection, and can therefore be used in a wide range of applications, such as verifying other measuring devices or measuring temperature temporarily without aborting the process. It is designed to be particularly suitable for building automation ...
|
|
E+H/Endershaus Guided wave radar measures travel time principle Levelflex FMP50
Introduction:E+H/Endershaus Guided Wave Radar Measurement Stroke Time Principle Levelflex FMP50, Levelflex FMP50 is a basic liquid measuring instrument, suitable for temperature, pressure or corrosion resistance requirements are not high requirements for measurement occasions, storage tanks and utilities and other basic applications.
|
|
E+H/Endershaus Liquid Tuning Fork Level Limit Switch FTL260-0010
Product Introduction: Liquiphant is a liquid limit switch for storage tanks, tanks with agitators and pipelines. It can be used as a substitute for float switches in situations of accumulation, disturbance, liquid flow and air bubbles.
FTL260-0010
[0 ...
|
|
E+H/Endershaus thermocouple sensor TSC310 with a maximum process pressure of 25 bar
Introduction: The E+H/Endershaus thermocouple sensor TSC310 offers a high level of operational safety thanks to its simple installation and reliable and accurate temperature measurement in common process applications. The probes are particularly suitable for measuring gaseous and liquid states in machinery, laboratory instruments and factories.
|
|
E+H/Endershaus sheath TWF16 with a insertion depth of 2.2mm
Introduction: E+H/Endershaus sheath TWF16, a special ceramic sheath is required for process measuring points at extremely high temperatures. The sheath made of special materials protects the sensor from mechanical and chemical damage during use and prolongs its service life. As a result: savings in measurement ...
|
|
E+H/Endershaus Mass Flow Meter Proline Promass E 300 has a range of –40 to +150°C
Introduction: The E+H/Endershaus mass flow meter Proline Promass E 300 is a robust and cost-effective solution for long-term use for high-precision liquid and gas measurements in a wide range of standard applications in different industries. Used in conjunction with an all-in-one transmitter, the Promass...
|
|
Contact
working hours
