Introduction: E+H/Endershaus Electronic Vibrating Limit Detection Soliphant FTM50, Soliphant M is a rugged tuning fork limit level detection switch for solid fines or low-density loose solid powders in silos. It has a wide range of applications and has passed the international certification for dust, flammable gas and other hazardous area applications. Polished fork bodies, clamp process connections, stainless steel housings or aluminum housings and coated forks are available. Typical applications include: cereals, flour, cocoa beans, granulated sugar, animal feed, dye powder, chalk, etc
Features:
SIL2 according to IEC 61508
No mechanical moving parts, no maintenance, no wear and tear, long service life.
Unaffected by external vibrations and adhesion, maintenance-free operation, and unaffected by solid lumps
Equipped with a variety of electronic plug-in types such as NAMUR, relays, semiconductor thyristors, PFM signal outputs, for connection to various process control systems
Adhesion and wear display functions are optional, density setting and switching delay function are optional
The sensor is available in coated or polished versions
Since 1967, it has been a market leader in the field of level measurement of bulk solids
Product parameters
Measuring principle
Solid tuning forks
Features/Applications:
Fine particle and dust limit switches
Fork body sensors
general
No calibration is required
Unaffected by adhesion or external vibrations
Rugged
Externally read switch values
All-in-one meter
peculiarity
Adhesion and corrosion testing
Detachable type
3 temperature types
SIL 2
Power/Communications
10… 55V DC, PNP, three-wire system
19… 253V AC, two-wire system
19… 253V AC / 19V… 55V DC, 2 relay contacts
8/16mA
NAMUR
PFM
Ambient temperature
-50…70 °C
（-60…160 °F）
Process temperature
-50…280 °C
（-60…540 °F）
Process pressure (absolute)/maximum overpressure limit
Vacuum... 25 bar
(Vacuum...) 360 psi）
Minimum media density
10 g/l (8 g/l, special order)
The main wetted parts
Optional:
316L 3.2 µm
316L 0.8 µm
316L PTFE coating (to avoid adhesion)
316L ETFE coating (to avoid corrosion)
Process connections
screw thread
R 1 1/2"
1 1/4" NPT
1 1/2" NPT
Flange EN DN50... DN100
Flange ASME 2"... 4"
Flange JIS 50A... 100A
Hygienic process connections
Tri-Clamp ISO2852 clamps
Sensor length
Standard: 200mm (8")
Short: 145mm (5.7")
correspondence
DC PNP, two-wire system
AC, transistor
DPDT, Relay
8/16mA
NAMUR
PFM
Certificates and certifications
ATEX、FM、CSA、CSA C/US、IEC Ex、TIIS、INMETRO、NEPSI、EAC
Security certifications
SIL
Design Certification
EN 10204-3.1
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus Servo Tank Meter Proservo NMS81 product, if you are interested in E+H/Endershaus Servo Tank Meter, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus Radar Measurement Journey Time Principle Micropilot FMR53
Introduction: E+H/Endershaus Radar Measurement Travel-Time Principle Micropilot FMR53, Micropilot FMR53 is suitable for level measurement in simple operating conditions, and its pole antenna is particularly suitable for small process connections. PTFE-coated antennas and flanges are highly corrosion-resistant.
Give birth...
|
|
E+H/Endershaus Bar Protector TA575 insertion depth 5 mm
Introduction: E+H/Endershaus Bar Protective Sleeve TA575, because of the harsh process conditions, the strength of the protective sleeve must be precisely calculated. Dyeing penetration test, ultrasonic test, helium leak test, pressure durability test, and various non-destructive material tests to prove the material and workmanship.
|
|
E+H/Endershaus Gauge Pressure Transmitter Cerabar PMC11 Measurement accuracy 0.5%
Description: The E+H/Endershaus gauge pressure transmitter Cerabar PMC11 is the most cost-effective compact pressure transmitter. Non-oil-filled ceramic diaphragm sensor with capacitive gauge pressure measuring range of 400 mbar... 40 bar。
Features:
The transmitter is compact and ...
|
|
E+H/Endershaus Mass Flow Meter Proline Promass S 100 Measuring Tube 316L
Description: The E+H/Endershaus flow meter Proline Promass S 100, designed for space-constrained applications, will be the first choice for system integrators, skid-mounted manufacturers and equipment manufacturers.
Features:
Reduced installation costs – fully self-draining tube design ...
|
|
E+H/Endershaus Radar Level Measurement Micropilot NMR81 Input 4-20mA
Description: E+H/Endershaus Radar Level Measurement Micropilot NMR81, Micropilot NMR81 can be used for metering transfer and inventory control measurements, is NMi and PTB certified and meets the relevant requirements of R85 and API 3.1B standards. NMR81 is particularly suitable for measurements in free space ...
|
|
E+H/Endershaus temperature transmitter iTEMP TMT71
Description: The E+H/Endershaus temperature transmitter iTEMP TMT71 offers unmatched reliability, measurement accuracy and long-term stability when used in critical process segments in all industries. The transmitter can be configured to receive not only RTD and thermocouple (TC) signals, but also ...
|
|
E+H/Endershaus Radar measures travel time principle Micropilot FMR57
Introduction: E+H/Endershaus Radar Measurement Journey Time Principle Micropilot FMR57, Micropilot FMR57 sensor meets the highest requirements for level measurement of bulk solids and is suitable for level measurement in tall silos, coal bunkers or stockpiles.
Features:
Hardware and ...
|
|
E+H/Endershaus analogue pH electrode Ceragel CPS71 is IP68 rated
Description: E+H/Endershaus analogue pH sensor Ceragel CPS71, Ceragel CPS71 is an analogue electrode designed for pH measurement in sterile and hygienic applications. Its contamination-resistant gel ensures stable measurements in flowing media or low conductivity media. The electrodes can be ...
|
|
E+H/Endershaus Universal Dissolved Oxygen Measurement Transmitter Liquisys COM223
Introduction: E+H/Endershaus Universal Dissolved Oxygen Measuring Transmitter Liquisys COM223, the Liquisys COM223 standard transmitter can be used with the COS41 and COS61 dissolved oxygen measurement sensors.
Features:
Increased operational safety: Continuous process checks ...
|
|
E+H/Endershaus electromagnetic flowmeter Proline Promag P 100 is lined with PFA
Introduction: The E+H/Endershaus electromagnetic flowmeter Proline Promag P 100 is suitable for process applications in the chemical industry and for the measurement of high-temperature, corrosive media. The Promag P 100 features an ultra-compact transmitter that is small and versatile for easy and seamless system integration, ...
|
|
E+H Proline Promass G100 Liquid error ±.10%
Description: The E+H/Endershaus mass flow meter Proline Promass G 100 enables safe and precise measurement of liquids and gases in high-pressure applications with pressures up to 350 bar (5080 psi). Simple and safe safety with safety diaphragm and threaded process connections.
|
|
E+H/Endershaus Tuning Fork Limit DetectionLiquiphant FTL85 2-wire 4... 20mA
Introduction: E+H/Endershaus Tuning Fork Limit Detection Liquiphant FTL85, Liquiphant FTL85 Coated Tuning Fork Limit Switch can be used in explosion hazard areas, has passed several international certifications, is used for fail-safe overfill protection measurement occasions, meets SIL3 functional safety requirements, adopts enamel ...
|
|
E+H/Endershaus Digital ORP electrode Memosens CPS12E
Description: E+H/Endershaus Digital ORP Electrode Memosens CPS12E, Memosens CPS12E is an all-rounder digital ORP electrode.
Features:
The ORP electrode is robust and low-maintenance: the large area is stain-resistant PTFE diaphragm to avoid contamination by the medium. Long poison ...
|
|
E+H/Endershaus chlorine measurement transmitter Liquisys CCM253
Description: E+H/Endershaus Chlorine Measurement Transmitter Liquisys CCM253, Liquisys CCM253 is a standard chlorine measurement transmitter and can measure pH to compensate for chlorine measurement.
Features:
Increased operational safety: Continuous process inspection system ...
|
|
E+H/Endershaus RTD Thermometer TST602
Description: The E+H/Endershaus RTD thermometer TST602 can be installed quickly and easily directly on the wall of a pipe or vessel without the need for a process connection, and can therefore be used in a wide range of applications, such as verifying other measuring devices or measuring temperature temporarily without aborting the process. It is designed to be particularly suitable for building automation ...
|
|
E+H Electromagnetic flowmeter Proline Promag W 400 Error ±0.5 %
Description: The E+H/Endershaus electromagnetic flowmeter Proline Promag W 400 can be used in a wide range of applications thanks to its international approvals for metering transfer and drinking water. It is available in both one-piece and split versions. The Promag D 400 is equipped with a powerful transmitter for use in water and ...
|
|
E+H/Endershaus Guided wave radar measures travel time principle Levelflex FMP52
Introduction: E+H/Endershaus Guided Wave Radar Measuring Stroke Time Principle Levelflex FMP52, the Levelflex FMP52 uses a corrosion-resistant PFA seamless coated probe for level measurement of corrosive liquids.
Features:
Even in variable measuring products or process strips...
|
|
E+H/Endershaus radar measurement Micropilot FMR540
Introduction: E+H/Endershaus Radar Measurement Micropilot FMR540, Micropilot FMR540 NMi and PTB certified for metering transfer and inventory control measurements, meeting the relevant requirements of R85 and API 3.1B standards. The FMR540 with parabolic antenna is particularly suitable for ...
|
|
Rosemount/Rosemount Non-Contact Level and Flow Transmitter 1208AG Measuring range 49 feet
Introduction: Rosemount/Rosemount Non-Contact Level and Flow Transmitter 1208AG, the Rosemount 1208 Series provides accurate and reliable level measurement and open channel flow calculations. The range includes two models designed to address water and wastewater applications, utilities, and simple level applications.
|
|
E+H/Endershaus multi-point thermometer iTHERM TMS31 MultiSens
Description: E+H/Endershaus iTHERM TMS31 MultiSens, iTHERM MultiSens TMS31 multi-point thermometer with modular design for average temperature detection and density ladder in storage, oil or fuel tanks for grain, organic bulk material storage.
|
|
Contact
working hours
