Description: E+H/Endershaus Memosens CPS31E, Memosens CPS31E digital pH sensor, designed for pH compensation measurement in the sterilization process.
Features:
Reliable results: The ceramic diaphragm ensures reliable measurement of low conductivity media. When the conductivity of the medium to be measured is low, it is recommended to choose a three-diaphragm structure.
Robust and durable: The optional salt ring effectively extends the service life of the electrode.
Precise measurement: Low electrolyte consumption with very little drift.
Memosens 2.0 technology supports the expansion of the memory unit, the storage of calibration and process parameters, and is the perfect basis for implementing predictive maintenance and advancing IIoT technology.
Safe operation: Non-contact inductive signal transmission means that humid conditions have no effect on the measurement results.
Cost-effective: Rapid on-site replacement of electrodes to extend uptime, and regeneration of electrodes to extend electrode life.
Product parameters
Measuring principle
Glass electrodes
apply
•drinking water
• Swimming pool water
• Measurement of pH compensation during free chlorine
peculiarity
Digital pH electrode for drinking water
and standard applications for swimming pool water
Measuring range
pH 1 to 13
Measuring principle
Gel-filled reference with one or three ceramic junctions, optional salt storage
devise
Temperature sensors are available for all shaft lengths
Material
Sensor shaft: suitable for the process
Glass pH membrane: Glass A
Type metal lead Ag/AgCl
Open aperture: ceramic junction
O-Rings: FKM
Process coupling: PPS glass fiber reinforced
Nameplate: Ceramic metal oxide
Dimensions
Diameter: 12 mm (0.47 in.)
Shaft Length: 120 mm (4.70 inches)
Process temperature
–15 to 80 °C (5 to 176 °F)
Process pressure
0.8 to 4 bar (11.6 to 58 psi) (absolute)
Temperature sensor
New Iron 30k
Explosion-proof certification
ATEX, IECEx, CSA C/United States, NEPSI, Japan explosion-proof and Anglo-American special European approvals, suitable for:
Hazardous Area 0, Zone 1, and Zone 2.
connect
Inductive, contactless connector with Memosens 2.0 technology
Ingress protection
IP68 rating
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus digital pH electrode Memosens CPS31E product, if you are interested in the principle of ultrasonic measurement travel time, please also contact our staff, we look forward to your call, we hope that our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus chlorine measurement transmitter Liquisys CCM253
Description: E+H/Endershaus Chlorine Measurement Transmitter Liquisys CCM253, Liquisys CCM253 is a standard chlorine measurement transmitter and can measure pH to compensate for chlorine measurement.
Features:
Increased operational safety: Continuous process inspection system ...
|
|
The E+H/Endershaus PAH sensor CFS51 is IP68 rated
Introduction: E+H/Endershaus PAH sensor CFS51, the robust and low-maintenance Memosens CFS51 fluorescence sensor measures polycyclic aromatic hydrocarbons (PAHs) according to MEPC.259(68) and MEPC.340(77) standards.
Features:
Unique...
|
|
E+H Proline Prosonic Flow 93P 1.4308/CF-8
Introduction: The E+H/Endershaus Ultrasonic Flow 93P strap-on sensor is designed specifically for the process industry. Combined with the Prosonic Flow 93 transmitter with touch capability, four-line display, and a wide range of extended functions, the Proson ...
|
|
E+H/Endershaus Radar measures travel time principle Micropilot FMR54
Introduction:E+H/Endershaus Radar Measurement Travel Time Principle Micropilot FMR54, Micropilot FMR54 is mainly used for liquid level measurement in high temperature and high pressure occasions, and its specially designed flat panel antenna is especially suitable for liquid level measurement with waveguide installation.
Features:
...
|
|
E+H/Endershaus Sheath TA535 insertion depth 10 mm
Introduction: E+H/Endershaus Sheath TA535, with its hexagonal extension, is suitable for industrial applications with medium and advanced process pressures. It is generally fixed to pipes or tanks that use threaded connections. Due to its special construction, it can carry a 6 mm diameter (0.24 in) probe ...
|
|
E+H/Endershaus Modular RTD Thermometer TR13
Introduction: The E+H/Endershaus modular RTD thermometer TR13 is a highly modular, rugged thermometer for almost all industry applications. Compatible with all common communication protocols, the head-mounted transmitter is ready-to-use, with enhanced ...
|
|
E+H/Endershaus Liquid Tuning Fork Level Limit Switch FTL260-0010
Product Introduction: Liquiphant is a liquid limit switch for storage tanks, tanks with agitators and pipelines. It can be used as a substitute for float switches in situations of accumulation, disturbance, liquid flow and air bubbles.
FTL260-0010
[0 ...
|
|
E+H/Endershaus Analog ORP Electrode Orbisint CPS12 IP68 Protection
Introduction: E+H/Endershaus Analog ORP Electrode Orbisint CPS12 is an all-rounder used in process and environmental engineering. Reliable, high-precision measurements even in hazardous areas. Designed with low maintenance and long service life, the electrode can save ...
|
|
E+H/Endershaus analogue total chlorine sensor CCS120
Introduction: E+H/Endershaus Analog Total Chlorine Sensor CCS120, CCS120 Analog Sensor for Standard Measurement of Total Chlorine. Even in the event of flow or conductivity fluctuations, reliable measured values are transmitted, the disinfection loop is controlled, and the water is free of bacteria. At the same time, sensor calibration and ...
|
|
E+H/Endershaus Modular RTD Thermometer TH11
Introduction: E+H/Endershaus Modular RTD Thermometer TH11, TH11 is a RTD temperature sensor for use in the process industry or in environmentally friendly factory automation. It consists of a thermal resistance (RTD) measuring probe, an insulating layer, and an armored core.
Features:
Flexible to use: ...
|
|
E+H/Endershaus digital conductivity sensor Indumax CLS50D
Description: E+H/Endershaus Digital Conductivity Sensor Indumax CLS50D, Indumax CLS50D is an inductive conductivity sensor for standard, hazardous and high-temperature environments.
Features:
Durable, chemically resistant, suitable for harsh conditions ...
|
|
E+H/Endershaus digital conductivity sensor Memosens CLL47E is IP68 rated
Introduction: E+H/Endershaus Digital conductivity sensor Memosens CLL47E, Memosens CLL47E is a four-electrode conductivity sensor for laboratory analysis and field measurements.
Features:
Wide measuring range, suitable for analysis and measurement of a variety of media
...
|
|
The E+H/Endershaus Compact Thermometer TM311 is IP69 rated
Introduction: E+H/Endershaus Compact Thermometer TM311, a compact thermometer that measures process temperature via a Pt100 temperature sensor (Class A accuracy, four-wire connection). Optionally installed in the transmitter to convert the Pt100 input signal. Models with built-in electronic modules can automatically detect ...
|
|
E+H/Endershaus hydrostatic level gauge Deltapilot FMB52 with a turndown ratio of 1001
Description: E+H/Endershaus Hydrostatic Level Gauge Deltapilot FMB52, Deltapilot FMB52 cable sensor with CONTITE measuring cell with fixed process connection, mainly used in the process and environmental protection industries, for measuring liquids or slurries in open or closed containers...
|
|
The E+H/Endershaus analogue conductivity sensor Condumax CLS21 is IP65 rated
Introduction: The E+H/Endershaus analogue conductivity sensor Condumax CLS21 is a rugged conductivity sensor for all processes and environments.
Features:
Reliable and precise measurements for low conductivity measurement applications
...
|
|
E+H/Endershaus temperature transmitter iTEMP® TMT181
Introduction: The E+H/Endershaus temperature transmitter iTEMP® TMT181, with its excellent reliability, accuracy and long-term stability, can be used in critical processes in all industries, transmitting not only RTD and TC conversion signals, but also resistance and ...
|
|
E+H/Endershaus pressure transmitter PMC131-A15F1A1S economical
Product Introduction: Pressure Transmitter PMC131-A15F1A1S Economical Pressure Transmitter with Oil-Free Ceramic Sensor to Measure Gas and Liquid Pressure. The Cerabar PMC131 is an attractively priced pressure transmitter with an oil-free capacitive ceramic sensor for absolute and gauge pressure measurements.
|
|
E+H Electromagnetic Flowmeter Proline Promag 10E PTFE-lined
Introduction: The E+H/Endershaus electromagnetic flow meter Proline Promag 10E is the standard electromagnetic flow sensor for the chemical industry. Provide the most economical solution for chemical customers. Used in combination with the Promag 10 transmitter in basic applications and in direct integration, the Promag 10E is used in ...
|
|
E+H/Endershaus Capacitive Limit Detection Nivector FTI26
Introduction: E+H/Endershaus Capacitive Limit Detection Nivector FTI26, Nivector FTI26 is an economical level switch for powder applications in the food industry and various industries.
Features:
Compact design for easy installation, even in confined spaces ...
|
|
E+H/Endershaus Ultrasonic Measurement of Travel Time Principle Prosonic FDU95
Introduction: E+H/Endershaus Ultrasonic Stroke Time Principle Prosonic FDU95, the FDU95 ultrasonic sensor is suitable for continuous, non-contact, maintenance-free level measurement of powders and solid lumps. The measurement is not affected by dielectric constant, density or humidity, and the sensor's self-...
|
|
Contact
working hours
