Introduction: E+H/Endershaus Ultrasonic Stroke Time Principle Prosonic FDU95, the FDU95 ultrasonic sensor is suitable for continuous, non-contact, maintenance-free level measurement of powders and solid lumps. The measurement is not affected by dielectric constant, density, or humidity, and the sensor's self-cleaning function eliminates the influence of media adhesion on the measurement. Suitable for use in explosion hazard areas; Maximum Measuring Range: Solids 45m (148ft)
Features:
Built-in temperature sensor for travel time calibration. Accurate measurements can be made even when the temperature changes
Suitable for use in harsh climatic conditions, the sensor and transmitter can be installed separately with a maximum installation distance of 300m
The sensor is self-cleaning to reduce adhesion formation
Built-in automatic sensor detection, connected to level transmitter FMU90 / FMU95, easy commissioning
IP68 degree of protection
Non-contact measurement minimizes service requirements
Dust-Ex and gas-Ex approvals (ATEX, FM, CSA)
Product parameters
Measuring principle
ultrasonic
Features/Applications:
Separable instruments in field or top hat disc mount housings, suitable for cabinet-mounted instruments with 300 m intervals between sensors and transmitters
Power/Communications
Four-wire (HART, Profibus DP)
Measurement accuracy
+/- 2mm + 0.17% of measuring distance
Ambient temperature
-40...80 °C
or 150 °C
(-40...176 °F
or 302 °F)
Process temperature
-40...80 °C
or 150 °C
(-40...176 °F
or 302 °F)
Process pressure (absolute)/maximum overpressure limit
0.7...1.5 bar abs
(10...22 psi)
The main wetted parts
UP (unsaturated polyester)
Silicone/PE foam (80°C/176°F)
Silicon / Stainless Steel (150°C / 302°F)
Process connections
G / NPT 1"
Blind zone distance
0.7 m / 80 °C
(2.3 ft / 176 °F)
0.9 m / 150 °C
(2.9 ft / 302 °F)
Maximum measuring distance
45 m (148 ft)
correspondence
Transmitters:
4...20 mA HART
Profibus DP
Certificates and certifications
ATEX、FM、CSA、IEC Ex、INMETRO、NEPSI
Options
Second way 4... 20mA output
subassembly
Transmitters:
FMU90
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus Ultrasonic Measurement Travel Time Principle Prosonic FDU95 product, if you are interested in the E+H/Endershaus Ultrasonic Measurement Travel Time Principle, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus digital pH sensor Memosens CPS31D with IP68 degree of protection
Description: E+H/Endershaus digital pH sensor Memosens CPS31D, Memosens CPS31D digital pH sensor for use as a pH compensation electrode in the disinfection process.
Features:
Three-ceramic diaphragm structure, which can be used for the measurement of low conductivity media, and the measurement results are reliable ...
|
|
E+H/Endershaus Liquiphant FTL71 Classification GL/ABS
Introduction: E+H/Endershaus Liquiphant FTL71 and Liquiphant FTL71 tuning fork limit detection switches can be used in explosion hazard areas and have obtained various international approvals.
Features:
Can be used for functional safety level SIL2/SIL3 ...
|
|
E+H/Endershaus vortex flowmeter Proline Prowirl D 200
Introduction: The E+H/Endershaus vortex flow meter Proline Prowirl D 200 can be installed directly between the flanges and is therefore a functional device for auxiliary process applications with low installation costs. The Prowirl D 200 uses true loop-powered technology to seamlessly integrate ...
|
|
E+H/Endershaus mass flow meter Proline Promass O 500 liquid ± 0.0005g/cm3
Description: The E+H/Endershaus mass flow meter Proline Promass O 500 is suitable for the oil and gas industry and provides high-precision measurement of liquids and gases at the highest process pressures. The sensor is perfectly suited for offshore conditions and is resistant to stress corrosion fracture. Promass O 500's ...
|
|
E+H/Endershaus Conductive Point Detection Liquipoint FTW32
Introduction: E+H/Endershaus Conductive Limit Detection Liquipoint FTW32, Liquipoint FTW32 can be used for conductive liquid limit detection, simple and safe measurement. The multi-point detection function (up to 5 measuring rods) enables the Liquipoint FTW32 to have a wider measuring range
Product Features ...
|
|
E+H/Endershaus Tuning Fork Level Meter FTL20-0220 Limit Level Detection Switch
Product introduction: FTL20-0220 is an all-in-one limit detection switch. Typically used in tank farms, vessels and pipelines, in cleaning and filtration systems and cooling and lubrication tanks, for overfill protection or to prevent pumps from running dry.
Tuning fork level meter FTL20-002B
...
|
|
E+H Proline Prosonic Flow 91W
Description: The E+H/Endershaus Ultrasonic Flow 91W strapped sensor is designed for flow measurement of water and wastewater. In combination with the cost-effective Prosonic Flow 91 transmitter with a button, the Prosonic Flow ...
|
|
E+H/Endershaus Electromagnetic flowmeter Proline Promag W 800 0—+80 °C
Introduction: The E+H/Endershaus electromagnetic flowmeter Proline Promag W 800 is ideal for off-grid applications in the water industry, both for direct buried and underwater measurements. The Promag 800 (Basic) is equipped with all the basic features, while the Promag 800 ( ...
|
|
E+H/Endershaus temperature transmitter iTEMP® TMT187
Description: The E+H/Endershaus temperature transmitter iTEMP® TMT187 is designed for signal transmission of the RTD Pt100 over a fixed measuring range. 4 ... A standard current output signal of 20 mA is used for process measurements. It can be used in all kinds of industrial fields, providing fast, convenient and ...
|
|
E+H/Endershaus iTHERM ModuLine TT151
Introduction: E+H/Endershaus iTHERM ModuLine TT151, TT151 protective sleeves are designed in accordance with DIN 43772, ASME B40.9, NAMUR NE 170 standards and can also be customized according to user requirements.
Features:
TT151 Standard Industrial Protective Sleeve, Composed of Integral Bar ...
|
|
E+H/Endershaus Ultrasonic Flow Meter Proline Prosonic Flow 93W
Description: The E+H/Endershaus Ultrasonic Flow 93W ultrasonic flow meter offers a wide range of outputs for optimal measurement performance with automatic frequency sweeping.
Features:
Low investment costs – the larger the pipe diameter (up to DN 400 ...
|
|
E+H/Endershaus Electronic Vibrating Limit Detection Liquiphant FTL81
Introduction: E+H/Endershaus Electronic Vibration Limit Detection Liquiphant FTL81, Liquiphant FTL81 Tuning Fork Limit Detection Switch can be used in explosion hazard areas, has obtained various international certifications, has both fail-safe, overflow protection functions, and functional safety level up to SIL3.
...
|
|
E+H/Endershaus Thermal mass flow meter Proline t-mass 65F
Description: The E+H/Endershaus thermal mass flow meter Proline t-mass 65F has a built-in device specifically designed for direct mass flow measurement of industrial gases and compressed air. By lowering the typical turndown ratio of 100:1, operating flow rates and offline leakage can be accurately measured. Built-in gas ...
|
|
E+H/Endershaus differential pressure transmitter Deltabar PMD75 -40...85 °C
Description: The E+H/Endershaus differential pressure transmitter Deltabar PMD75 with piezoresistive sensor and welded metal film is used in all industries for the continuous measurement of liquids, vapors and gases. The 3-button operation enables simple and reliable commissioning and operation. Integrated HistoROM data module ...
|
|
E+H/Endershaus pressure transmitter Cerabar PMC51B
Introduction: E+H/Endershaus pressure transmitter Cerabar PMC51B, PMC51B is part of the new generation of Cerabar transmitters. The instruments offer many advantages, such as convenient on-site or remote operation, as well as on-demand maintenance.
Features:
Using Smar...
|
|
E+H/Endershaus industrial thermometer iTHERM ModuLine TM121
Description: E+H/Endershaus industrial thermometer iTHERM ModuLine TM121, basic RTD or thermocouple thermometer for use in non-hazardous areas with standard extension neck, economical to use.
Features:
Reliable measurement and economical use
From product selection to ...
|
|
E+H/Endershaus analogue ORP electrode Orbipac CPF82 with IP68 degree of protection
Introduction: E+H/Endershaus Analog ORP Electrode Orbipac CPF82, Orbipac CPF82 Analog ORP Electrode is suitable for ORP measurement under harsh operating conditions.
Features:
Suitable for both flow-through and immersion installations
Long-term stability: the use of the second 3 electrolyte ...
|
|
E+H/Endershaus Modular Thermocouple Thermometer TC10
Introduction: The E+H/Endershaus Modular Thermocouple Thermometer TC10 is a highly modular, rugged thermometer for almost all industry applications. Compatible with all common communication protocols, the head-mounted transmitter is ready-to-use, with enhanced ...
|
|
E+H/Endershaus Protective Sleeve TW10 Insertion depth 4 mm
Introduction: E+H/Endershaus Protective Sleeve TW10, this metal protective sleeve is an important component for temperature measurement points in almost all industrial processes, especially in the fine chemical industry. It protects the measuring cell or sensor element from corrosion by the process medium and protects the temperature sensor itself from high pressures and ...
|
|
E+H/Endershaus digital pH sensor Orbipac CPF81D with IP68 degree of protection
Introduction: E+H/Endershaus Digital pH Probe Orbipac CPF81D, the Orbipac CPF81D is a digital pH probe that is a simple measurement solution for demanding applications.
Features:
The electrodes can be mounted in both flow-through and fixed mounting brackets
High long-term ...
|
|
Contact
working hours
