IDEC/Izumi Safety Switch HS1B-11R

The world's thinnest solenoid interlock switch is 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually unlocked The LED indicator shows solenoid valve operation Standard 3m cable (available on request)

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance. Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation. Reduction of operating force in position 2 ...

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VG7Y4ZSM-G 4 contacts 2NC, 1NO and 1NC, solenoid lock, side wires 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA solenoid consumption Electromagnetic locks and snap locks are available ...

Locks the guards until the machinery stops and the danger of inertia disappears. Key features: The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed. After the inertial action of the machine is stopped, the electrical signal of the controller ...

IDEC/Izumi HS6B Subminiature HS6B-02B01 Safety Interlock Switch 2NC Contact, 1m Cable 30x15x78mm enclosure One-piece cables reduce wiring time IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage) Direct door opening action: even if ...

2 Contacts, 1NC Gate, 1NC Monitor, Electromagnetic Lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 GS- ...

There is no need to perform the angle adjustment of the component end, and the position determination is simple and convenient. It can be installed horizontally and vertically, and can be easily mounted on various doors. Key features: There is no need to perform the angle adjustment of the component end, and the position determination is simple and convenient. It can be installed horizontally and vertically, and can be easily installed ...

2 contacts, 1NC 1NO access control monitoring circuit, electromagnetic lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 GS-ET-19（ ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 2 ⇒ 3 requires force and a clear sense of operation. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

The HS1B is a full-size interlock switch in a more rugged industrial die-cast aluminum housing. Options include red or green LED indicators, as well as two different circuit configurations. The HS2B comes with an optional red or green LED indicator and features the same ...

4 contacts, dual safety circuits, 1NC+1NC 1NC+1NC circuits, spring locks Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 ...

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

During mechanical operation, the guards/keys are securely locked. Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open. Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device. Key interlock type ...

4 Contacts, 1NC1NO Door, 1NC1NO Lock, Monitoring Circuit, Spring Lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: ENISO14119 GS-ET-19（T ...

IDEC/Izumi Safety Interlock HS5L Miniature Lock HS9Z-A52 Actuator Key Right Angle Type Right Angle Actuator Product Category Actuators The company has always been customer-centric, the concept of creating value for customers, quality and service to win the market, and sincerely hope to cooperate with all walks of life to ...

IDEC/Izumi's world's thinnest electromagnetic interlock switch 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually unlocked The LED indicator shows solenoid valve operation Standard 3m cable (can be ...

The non-contact safety switch with RFID technology improves the safety performance. Built-in safety features make the construction of a safety system independent of the combination with specific modules. Thanks to the RFID method, there is no error even if the door closes slowly. Even when installed on swing doors, sliding ...