The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and plug-in miniature relays with multi-level contacts, can be mounted on NS 35/7.5 rails, 2PDT, input voltage 230V AC/220V DC
advantage
Low-profile design
Efficient system connectivity via V8 adapter
Secure isolation between coil and contact in accordance with DIN EN 50178
RT III Hermetically Sealed Relay
Integrated input module and interference suppression module
Functional plug-in bridges
Coil side
Rated input voltage UN 230 V AC
220 V DC
Input voltage range 179.4 V AC ... 264.5 V AC （20 °C）
171.6 V DC … 264 V DC （20 °C）
Typical input current at UN 4.5 mA (at UN = 230V AC)
4.3 mA (at UN = 220 V DC)
Typical response time is 7 ms
Typical release time is 10 ms
Protection circuits: bridge rectifiers; Bridge rectifiers
The operating voltage is displayed with a yellow LED
handoff
Contact Type: 2 changeover contacts
Switch contact type Single contact
Drive and function monostability
Drive (Polarity) Bipolar
Contact material AgNi
Maximum switching voltage 250 V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250 V (L1, L2, L3), a bulkhead PLC-ATP must be used. FBST 8-PLC… Or... FBST 500… for equipotential bridging)
Minimum switching voltage 5 V AC/DC (10 mA)
Limit continuous current to 6 A
Maximum start-up current 15 A (300 ms)
Minimum switching current 10 mA (5 V)
Maximum power rating (resistive load) 140 W (24 V DC)
85 W (for 48 V DC)
60 W (can be used for 60 V DC)
44 W (for 110 V DC)
60 W (for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
0.2 A at 250 V, 13 DCs
3 A (at 250 V, AC15)
Connection: Screw connection
Stripping length 8 mm
Thread M3
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1.5 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Tightening torque 0.6 Nm ... 0.8 Nm
Mounting Type: DIN rail mounting
Assembly Instructions Arrangement without spacing
Installation Position Any
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix relay module PLC-RSC-230UC/21-21 - 2967099 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Relay module with manually operated locking - PLC-RSC-120UC/21-21AU/MS - 2910511
PLC-INTERFACE, including relay base and pluggable multilayer gold contact relay with manual operation and integrated status LED, screw connection, 2 changeover contacts, input voltage: 120 V AC / 110 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Phoenix/Phoenix Single relay with manually operated locking function - REL-IR2/LDP-110DC/2X21 - 2903663
Plug-in industrial relay with power contacts, 2 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, input voltage: 110 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ring...
|
|
Phoenix/Phoenix relay module - PLC-RSC-120UC/21-21 2967086
PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and plug-in miniature relays with multi-level contacts, can be mounted on NS 35/7.5 rails, 2PDT, input voltage 120V AC/110V DC
advantage
Low-profile design
Implemented via V8 adapter ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-230AC/21-21AU/MS - 2987998
Pluggable miniature relay, multi-layer contacts with hard gold plating, 2 PDTs, test keys, mechanical switch position display, status LED, coil voltage 230VAC
advantage
The strap can detect manual operation
Integrated status LEDs
The maximum switching current is 16A
DC model with freewheeling diode
...
|
|
REL-MR-12DC/21HC/EX - 2908821 single relay
Plug-in miniature power relay, RT III sealed, with power contacts, 1 changeover contact, input voltage: 12 V DC, in combination with the corresponding PLC base, is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Zone I, Class 2.
Advantages: Cutting up to 16 A ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 12DC/21 - 2961150
Plug-in miniature power relay with power contacts, 1 PDT, input voltage 12 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
size
...
|
|
Phoenix/Phoenix relay module PLC-RPT- 72UC/21-21/RW- 2900347
PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature power contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 2 PDTs, input voltage 72 V DC
advantage
...
|
|
REL-FO/L-110DC/2X21 - 1308307
Plug-in miniature relay, FASTON connection, 2 changeover contacts, status display: LED yellow, input voltage: 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 5x 107 switching cycles
Relay type: electromechanical relay
...
|
|
PLC-RPT-120UC/21 - 2900304
The PLC-INTERFACE, consisting of PLC-BPT.../21 base terminals with Push-in technology and pluggable miniature relays with power contacts, can be mounted on the DIN rail NS 35/7.5, 1 PDT, input voltage 120 V AC/110 V DC
advantage
Low-profile design
Adaptation via V8 ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/LDP- 60DC/4X21AU - 2903672
Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 60 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
...
|
|
Phoenix/Phoenix relay module - PLC-RPT- 24DC/21-21 2900330
PLC-INTERFACE, consisting of the Push-in base terminal block PLC-BPT.../21-21 and plug-in miniature relay with power contacts, can be mounted on a DIN rail type NS 35/7.5, 2 PDTs, input voltage 24 V DC
advantage
Low-profile design
Efficient system with V8 adapter ...
|
|
Phoenix/Phoenix relay module with manually operated locking - PLC-RPT- 48DC/21-21/MS - 2910521
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation, integrated status LEDs and freewheeling diode, Push-in connection, 2 changeover contacts, input voltage: 48 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Phoenix/Phoenix Single Relay REL-MR-BL- 48DC/21HC - 1109538
Plug-in miniature power relay, basic design, with power contacts, for high continuous current, 1 changeover contact, input voltage 48 V DC
Coil side
Rated input voltage UN 48 V DC
Input voltage range 33.6 V DC ... 105 V DC
Typical input electricity under UN ...
|
|
Phoenix/Phoenix relay module - PLC-RSC- 24DC/ 1- 1/ACT 2967109
The PLC-INTERFACE is suitable for output functions including PLC-BSC.../ACT base terminals with screw connection with plug-in miniature power contact relay for mounting on DIN rail NS 35/7.5, 2 NO contacts (1-1), input voltage 24 V DC
advantage
Direct connection ...
|
|
Relay module with manually operated locking - PLC-RPT- 24DC/21-21AU/MS - 2910524
PLC-INTERFACE, including relay base and pluggable multi-layer gold contact relay with manual operation, integrated status LEDs and freewheeling diode, Push-in connection, 2 changeover contacts, input voltage: 24 V DC
size
Width 14 mm
Height 80 mm
Depth 104 ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/ 1/ACT - 2900312
The PLC-INTERFACE is suitable for output functions, including PLC-BPT.../ACT base terminals with plug-in connection with plug-in miniature power contact relay for mounting on DIN rail NS 35/7.5, 1 NO contact, input voltage 24 V DC
advantage
Directly connected to the following ...
|
|
Phoenix/Phoenix relay module EMG 10-REL/KSR- 24/21-LC - 2942658
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large load, 1PDT, input voltage 24 V AC/DC
Advantages: Integrated input module and interference suppression module
Maximum power consumption of 0.5 W under rated conditions
Test voltage Coil/contact 4 kV ...
|
|
RIF-0-RSC-24DC/21AU - 2903372
Prefabricated relay modules with screw connections, including: relay base with ejection device and multi-layer gold-plated contact relays. Contact type: 1 changeover contact. Input voltage: 24 V DC
The maximum power consumption under the rated condition is 0.22 W
Test voltage (coil/contact) 4 k ...
|
|
Relay module with manually operated locking - PLC-RSC- 24UC/21HC/MS - 2910515
PLC-INTERFACE, incl. relay base and pluggable power contact relay with manual operation and integrated status LED, screw connection, 1 changeover contact, input voltage: 24 V AC/DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental conditions
...
|
|
Phoenix/Phoenix relay module DEK-REL- 24/1/SEN - 2964050
Relay module for sensors with solid state miniature relays, contacts (AgNi+Au): Small to medium loads, 1 normally open contact, input voltage 24V AC/DC, mountable on NS 35/7.5, module thickness 6.2 mm
advantage
Reduced costs due to the elimination of N-terminals
Most...
|
|
Contact
working hours
