PLC-INTERFACE, including relay base and pluggable multilayer gold contact relay with manual operation and integrated status LED, screw connection, 2 changeover contacts, input voltage: 120 V AC / 110 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental conditions
Ambient temperature (operating) -20 °C ... 55 °C
Ambient temperature (storage / transport) -20 °C ... 85 °C
Maximum height ≤ 2000 m
Protection class RT II (relay)
IP20 (Relay Base)
≥ IP54 (mounting position)
Coil side
Rated input voltage UN 120 V AC
110 V DC
Typical input current at UN is 5 mA
Typical response time 6 ms (110 V DC)
3 ms … 15 ms （120 V AC）
Typical release time 10 ms (110 V DC)
Typical release time range 3 ms ... 15 ms （120 V AC）
Protection circuit Bridge rectifier Bridge rectifier
The operating voltage is displayed with a yellow LED
Contact side
Contact Type: 2 changeover contacts
Switch contact type Single contact
Contact material AgNi, hard gold plating
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 12 V (1 mA)
Minimum switching current 1 mA (12V)
The maximum starting current is 50 mA
Limit continuous current to 50 mA
Contact surface (with destructible gold plating)
Precautions If the plating is damaged, the following values can be applied
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 12 V (10 mA)
Limit continuous current to 6 A
Maximum start-up current 12 A (20 ms)
Minimum switching current 10 mA (12V)
Maximum power rating (resistive load) 192 W (24 V DC)
62 W （48 V DC）
42 W （60 V DC）
55 W （110 V DC）
66 W （220 V DC）
2000 VA （250 V AC）
Switching capacity 1 A (24 V, DC13)
1.5 A （230 V, AC15）
overview
Test voltage 4 kVrms (50 Hz, 1 minute, coil/contact)
2.5 kVrms (50 Hz, 1 minute, CO contact/CO contact)
Mode of operation 100% working factor
Flammability rating according to UL 94 V0 (enclosure)
Mechanical life 5x106 switching cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection Name Coil Side
Connection: Screw connection
Stripping length 8 mm
Thread M3
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1.5 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Connect to data2
Connection Name Contact Side
Connection: Screw connection
Stripping length 8 mm
Thread M3
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1.5 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix relay module with manual operation locking function - PLC-RSC-120UC/21-21AU/MS - 2910511 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance, and give you a surprise.
|
More on that
|
Relay module with manually operated locking - PLC-RSC-120UC/21AU/MS - 2909657
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, plug-in miniature relay with multi-layer gold-plated contacts and manual operation, 1 changeover contact, 120 V AC/110 V DC input voltage
size
Width 6.2 mm
Height 80 m ...
|
|
Phoenix/Phoenix relay module PLC-RPT-120UC/21-21AU -2900342
PLC-INTERFACE, incl. PLC-BPT.../21-21 base terminal with plug-in connection with plug-in miniature multilayer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 120 V AC/DC
advantage
Low-profile design
Via V8 adapter ...
|
|
Phoenix/Phoenix relay module PLC-RPT-12DC/21-21/EX - 2909513
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with plug-in connection and plug-in relay with power contacts, 2 changeover contacts, 12 V DC input voltage. It is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2.
Forehead...
|
|
Phoenix/Phoenix relay module PLC-RPT- 72UC/21-21/RW- 2900347
PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature power contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 2 PDTs, input voltage 72 V DC
advantage
...
|
|
Phoenix/Phoenix relay module RIF-1-RPT-LV-230AC/2X21AU - 2903327
Pre-assembled relay modules with plug-in connections, including: relay bases, multi-layer contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 230 V AC
Test voltage coil/contact 2.5 kVrms (50 Hz, 1 minute, line ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/LDP- 60DC/4X21AU - 2903672
Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 60 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
...
|
|
Phoenix/Phoenix relay module EMG 10-REL/KSR-G 24/ 2-LC - 294211
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large loads, 1 NC contact, input voltage 24 V DC
Advantages: Integrated input module and interference suppression module
Maximum power consumption of 0.5 W under rated conditions
Test voltage (coil/contact ...
|
|
Phoenix/Phoenix relay module EMG 10-REL/KSR-230/ 1-LC - 2964403
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large loads, 1 NO contact, input voltage 230 V AC/DC
Advantages: Integrated input module and interference suppression module
Maximum power consumption under rated conditions is 1.1 W
Test voltage (coil ...
|
|
Relay module with manually operated locking - PLC-RPT-120UC/21-21/MS - 2910522
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation and integrated status LED, Push-in connection, 2 changeover contacts, input voltage: 120 V AC / 110 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
REL-MR- 48DC/21-21AU - 2834847 single relay
Pluggable miniature power relay with multi-layer gold-plated contacts, 2 PDTs, input voltage 48 V DC
Benefits: RT III certified (wash-resistant)
Coil side
Rated input voltage UN 48 V DC
Input voltage range 31.2 V DC ... 119 V DC
Typical input current at UN ...
|
|
Phoenix/Phoenix Single Relays - REL-OR3/LDP-125DC/3X21 - 2909207
Plug-in octal relay with power contacts, 3 switching contacts, test button, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 12 V DC
Coil side
Rated input voltage UN 12 V DC
Input voltage range 1 ...
|
|
Phoenix/Phoenix relay module PLC-RSC-120UC/21HC - 2967662
PLC-INTERFACE, incl. PLC-BSC.../21 HC base terminal, screw connection, with plug-in miniature relay for high continuous current, for mounting on DIN rail NS 35/7.5, ultimate continuous current up to 10 A, 1 PDT, input voltage 120 V AC/110 V D...
|
|
Phoenix/Phoenix relay module EMG 17-REL/KSR- 60/21-21-LC - 2940414
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large load, 2PDT, input voltage 60 V AC/DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Integrated input module and interference suppression module
Rated ...
|
|
Phoenix/Phoenix relay module - PLC-RPT - 24DC/21 2900299
The PLC-INTERFACE, consisting of a PLC-BPT.../21 base terminal with Push-in technology and pluggable miniature relays with power contacts, can be mounted on the DIN rail NS 35/7.5, 1 PDT, input voltage 24 V DC
advantage
Low-profile design
Effective via V8 adapter ...
|
|
Phoenix/Phoenix relay module RIF-0-RPT-24DC/ 1 - 2903361
Pre-assembled relay modules with plug-in connections, including: relay base (with pop-up) and high-power contact relays. Contact type: 1 NO contact. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input voltage range 19.2 V DC ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/21-21/RW - 2900346
PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature power contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 2 PDTs, input voltage 24 V DC
advantage
...
|
|
Phoenix/Phoenix relay module EMG 45-REL/IR-W230/HWR - 2952185
Relay module with solid state industrial relay, contacts: 2PDT, multi-fault alarm input, input diode P-pole interconnection (6 x 1N4007 diodes), coil and capacitor in parallel, with multi-input indicator, input voltage 230V AC
Maximum power consumption under rated conditions is 3.68 W
Test Electricity ...
|
|
Phoenix/Phoenix relay module RIF-2-RPT-LV-230AC/4X21AU - 1188200
Prefabricated relay modules with plug-in interfaces, including: relay bases, multi-layer contact relays, pluggable display/interference suppression modules, and fixed brackets.
Contact type: 4 changeover contacts. Input voltage: 230 V AC
All suppliers of 76 Technology have been strictly audited ...
|
|
Phoenix/Phoenix relay modules - RIF-1-RSC-LDP-24DC/2X21 2903350
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 2 changeover contacts. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input...
|
|
RIF-0-RSC-12DC/21 - 2903375 Phoenix/Phoenix relay module
Prefabricated relay modules with screw connections, including relay bases with ejection devices and high-power contact relays. Contact type: 1 changeover contact. Input voltage: 12 V DC
Maximum power consumption of 0.19 W under rated conditions
Test voltage (coil/contact) 4 kVr ...
|
|
Contact
working hours
