Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 60 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 70 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Protection class RT I
Coil side
Rated input voltage UN 60 V DC
Typical input current at UN is 18 mA
Typical response time is 13 ms
Typical release time is 14 ms
Protection circuit: Damping diode
The status display LED is yellow
Power consumption at rated conditions is 1.08 W
Contact side
Contact Type: 4 PDT
Switch contact type Single contact
Contact material AgNi, hard gold plating
Precautions When the given limit values are exceeded, the gold plating layer is destroyed. If it continues to be used, the maximum value of the high-power relay applies. Compared to using the power contact alone, the service life is reduced.
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 2 V (at 24 mA)
Minimum switching current 2 mA (24 V DC)
The maximum starting current is 50 mA
Limit continuous current to 50 mA
Maximum power rating (resistive load) 1.2 W (24 V DC)
The minimum on-off capacity is 48 mW
Motor load 1/3 HP, 240 V AC in accordance with UL 508
Contact surface (with destructible gold plating)
Contact material AgNi
Precautions If the plating is damaged, the following values can be applied
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 24 mA)
Limit continuous current to 6 A
Max. start-up current 16 A (20 ms, NO-contact)
Minimum switching current 5 mA (24 V)
Maximum power rating (resistive load) 144 W (24 V DC)
124 W (for 48 V DC)
108 W (can be used for 60 V DC)
52 W (for 110 V DC)
48 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.22 A (at 120 V, 13 DCs)
0.11 A at 250 V, DC13
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1 A (at 240 V, AC15)
overview
Test voltage 2.5 kVrms (50 Hz, 1 minute, coil/contact)
2 kVrms (50 Hz, 1 minute, CO contact/CO contact)
Mode of operation 100% working factor
Mechanical life: approx. 2x 107 cycles
Installation Position Any
Connect your data
Connection: Push-in connection
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix single relay with manual operation locking function - REL-IR4/LDP- 60DC/4X21AU - 2903672 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance, and give you a surprise.
|
More on that
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 12DC/21AU/MS - 2909644
Plug-in miniature power relay with multi-layer gold-plated contacts, 1 changeover contact, manual operation, 12 V DC input voltage
size
Width 5 mm
Height 28 mm
Depth 16 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 85 °C
Ambient temperature (storage ...
|
|
Relay module with manually operated locking - PLC-RSC-230UC/21-21/MS - 2910506
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation and integrated status LED, screw connection, 2 changeover contacts, input voltage: 230 V AC / 220 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
...
|
|
REL-MR- 12DC/21HC - 2961309 single relay from Phoenix
Plug-in miniature power relay with power contacts for high continuous current, 1 PDT, input voltage 12 V DC
Advantage: Switching current up to 16 A
Coil side
Rated input voltage UN 12 V DC
Input voltage range 7.8 V DC ... 28.8 V DC
Take U...
|
|
Phoenix/Phoenix relay module PLC-RSC-12DC/21/EX - 2909522
PLC-INTERFACE, consisting of DIN rail mountable, 6.2 mm base terminal with screw connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 12 V DC input voltage. Certified according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/L- 24AC/4X21AU - 2903683
Plug-in industrial relay with power contacts and additional contacts plated with hard gold, 4 PDT, test button, status indication LED, mechanical switch setting display, coil voltage: 24 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Environment...
|
|
Relay module with manually operated locking - PLC-RPT-120UC/21-21AU/MS - 2910528
PLC-INTERFACE, including relay base and pluggable multi-layer gold contact relay with manual operation and integrated status LED, Push-in connection, 2 changeover contacts, input voltage: 120 V AC / 110 V DC
size
Width 14 mm
Height 80 mm
Depth 104 ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24UC/21 - 2966184
The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and the plug-in miniature relay with multi-level contacts, can be mounted on the NS 35/7.5 rail, 1PDT, input voltage 24V AC/DC
advantage
Low-profile design
Effective ...
|
|
Phoenix/Phoenix Time Relays Timing Relays - ETD-SL-2T-I - 2866174
Pulse encoder with adjustable pulse and pause time (50 ms - 100 h), wide-range power supply, 2 PDT
Increasing demands are placed on safety and system reliability in all areas. Processes in mechanical engineering, the chemical industry, power plants and automation technology are becoming more and more complex.
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR2/100AC/2X21 - 2907052
Plug-in industrial relay with power contacts, 2 changeover contacts, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 100 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) ...
|
|
Relay module with manually operated locking - PLC-RSC-120UC/21AU/MS - 2909657
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, plug-in miniature relay with multi-layer gold-plated contacts and manual operation, 1 changeover contact, 120 V AC/110 V DC input voltage
size
Width 6.2 mm
Height 80 m ...
|
|
Phoenix/Phoenix Relays PLC-RPT-110UC/21HC/RW - 2900326
The PLC-INTERFACE is suitable for rail applications and high continuous currents, including base terminals, plug-in connection with plug-in miniature relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 1 PDT, input voltage 110 V DC
Excellent...
|
|
Phoenix/Phoenix relay modules EMG 10-REL/KSR-120/ 1-LC -2964432
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large loads, 1 NO contact, input voltage 120 V AC/DC
Advantages: Integrated input module and interference suppression module
The maximum power consumption under rated conditions is 0.6 W
Test voltage (coil ...
|
|
Phoenix/Phoenix relay module with manually operated locking - PLC-RSC-120UC/ 1AU/MS/SEN - 2909664
The PLC-INTERFACE is suitable for input functions, including the PLC-BSC.../SEN base terminals, screw connection, plug-in miniature relays with multi-layer gold-plated contacts and manual operation, 1 normally open contact, 120 V AC/110 V DC input voltage
size
Width 6. ...
|
|
Phoenix/Phoenix relay module - PLC-RSC- 24DC/21-21/MS - 2910502
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation, integrated status LEDs and freewheeling diode, screw connection, 2 changeover contacts, input voltage: 24 V DC
size
Width 14 mm
Height 80 mm
...
|
|
Phoenix/Phoenix Single Relay REL-PR3-48DC/3X21 - 2908894
Plug-in high-power relay with power contacts, 3 N/O contacts, coil voltage: 48 V DC
Coil side
Rated input voltage UN 48 V DC
Input voltage range 40.8 V DC ... 52.8 V DC (20 °C)
Typical input current at UN is 28 mA
UN's input power consumption ...
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/21-21/EX - 2909516
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with plug-in connection and plug-in relay with power contact, 2 changeover contacts, 230 V AC/220 V DC input voltage. It has been approved according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
Phoenix/Phoenix Single Relay REL-IR-BL/L-115AC/4X21 - 1109564
Plug-in industrial relay, basic design, with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, input voltage: 115 V AC
Service life, electrical aspects See graph
Test voltage 2.5 kVrms (50 Hz, 1 minute, line ...
|
|
Relay module with manually operated locking - PLC-RSC-230UC/21-21AU/MS - 2910513
PLC-INTERFACE, including relay base and pluggable multilayer gold contact relay with manual operation and integrated status LED, screw connection, 2 changeover contacts, input voltage: 230 V AC / 220 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Relay module with manually operated locking - PLC-RPT- 24DC/21-21/MS - 2910519
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation, integrated status LEDs and freewheeling diode, Push-in connection, 2 changeover contacts, input voltage: 24 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Relay module with manually operated locking - PLC-RPT-230UC/21HC/MS - 2910534
PLC-INTERFACE, including relay base and pluggable power contact relay (with manual operation and integrated status LED), Push-in connection, 1 changeover contact, input voltage: 230 V AC / 220 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Contact
working hours
