The PLC-INTERFACE is suitable for output functions including PLC-BSC.../ACT base terminals with screw connection with plug-in miniature power contact relay for mounting on DIN rail NS 35/7.5, 2 NO contacts (1-1), input voltage 24 V DC
advantage
Actuators connected directly to relay modules
Efficient system connectivity via V8 adapter
No additional combination terminal blocks are required
Up to 60% installation time savings
Safely isolated relay module between coil and contact in accordance with DIN EN 50178
Up to 80 % installation space savings
Functional plug-in bridges
Coil side
Rated input voltage UN 24 V DC
Input voltage range 20.2 V DC ... 33.6 V DC （20 °C）
Typical input current at UN is 18 mA
Typical response time is 8 ms
Typical release time is 10 ms
Protection circuits polarity protection; Polarity protection diodes
spare diodes; Freewheeling diodes
The operating voltage is displayed with a yellow LED
handoff
Contact Type: 2 N/O contacts
Switch contact type Single contact
Drive and function monostability
Drive (Polarity) Bipolar
Contact material AgNi
Maximum switching voltage 250 V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250 V (L1, L2, L3), a bulkhead PLC-ATP must be used. FBST 8-PLC… Or... FBST 500… for equipotential bridging)
The minimum switching voltage is 5 V AC/DC
Limit continuous current to 6 A
Maximum start-up current 25 A (20 ms)
The minimum switching current is 10 mA
Maximum power rating (resistive load) 140 W (24 V DC)
85 W (for 48 V DC)
60 W (can be used for 60 V DC)
40 W (for 110 V DC)
60 W (for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.2 A at 250 V, 13 DCs
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 250 V, AC15)
Connection: Screw connection
Stripping length 8 mm
Thread M3
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1.5 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Tightening torque 0.6 Nm ... 0.8 Nm
Mounting Type: DIN rail mounting
Assembly Instructions Arrangement without spacing
Installation Position Any
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix relay module - PLC-RSC- 24DC/ 1- 1/ACT 2967109 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix Time Relays Timing Relays - ETD-BL-2T-I-230 - 2907713
Compact pulse encoder with adjustable pulse and pause time (50 ms-100 h), wide-area power supply, Push-in connection, 1 PDT
Product Description:
Increasing demands are placed on safety and system reliability in all areas. Mechanical engineering, chemical industry, power plants and automatic ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/LDP-110DC/4X21 - 2903680
Plug-in industrial relay with power contacts, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2–, coil voltage: 110 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
...
|
|
Phoenix/Phoenix relay module - RIF-0-RPT-12DC/21 2903371
Pre-assembled relay modules with plug-in connections, including: relay base (with pop-up) and high-power contact relays. Contact type: 1 PDT. Input voltage: 12 V DC
Coil side
Rated input voltage UN 12 V DC
Input voltage range 9.6 V DC ... 18 V ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 48DC/21HC - 2900294
The PLC-INTERFACE is suitable for high continuous currents and consists of PLC-BPT.../21 HC base terminals with plug-in connection with plug-in miniature relays for mounting on the DIN rail NS 35/7.5 with a maximum continuous current of up to 10 A, 1 PDT, and an input voltage of 48 V DC
advantage
...
|
|
Phoenix/Phoenix relay modules EMG 10-REL/KSR-G 24/21-LC - 2942153
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large load, 1PDT, input voltage 24 V DC
Advantages: Integrated input module and interference suppression module
Product Type: Relay Module
Application Universal
Mode of operation 100% working factor
...
|
|
REL-PR3-125DC/3X21 single relay - 2909056
Plug-in high-power relay with power contacts, 3 switching contacts, coil voltage: 125 V DC
Service life, electrical aspects See graph
The maximum power consumption under the rated condition is 1.34 W
Test voltage 2.5 kVrms (50 Hz, 1 minute, coil/contact)
Test voltage ...
|
|
Phoenix/Phoenix relay module RIF-2-RPT-LV-230AC/4X21/EX-2909739
Prefabricated relay modules include: relay base, plug-in function module, power contact relay and bracket, certified according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Zone 2, Push-in connection, 4 PDTs, varistor, input voltage: 230 V AC
...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 24AC/21-21/MS - 2987956
Pluggable miniature relay with power contacts, 2 PDTs, test keys, mechanical switch position display, status LED, input voltage 24 V AC
advantage
The strap can detect manual operation
Switching current up to 16 A
DC model with freewheeling diode
Integrated status LEDs
Mechanical switches ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 5DC/1/SSI - 1094764
PLC-INTERFACE, CONSISTING OF BASE TERMINALS WITH PLUG-IN CONNECTION AND "HOT" PLUG-IN MINIATURE RELAYS AS WELL AS INTERNAL AMPLIFIER CIRCUITRY AND A SUITABLE AUXILIARY POWER SUPPLY FOR WEAK SIGNAL SOURCES, 1 NO NO NO NO AT 5 V DC RATED INPUT VOLTAGE
Rated supply voltage 24 V DC
Input current ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-110DC/21-21AU/MS - 1013727
Pluggable miniature relay, multi-layer contacts with hard gold plating, 2 changeover contacts, test button, mechanical switch position indicator, status LED, freewheeling diode, polarity A1+, A2-, input voltage 110 V DC
advantage
The strap can detect manual operation
DC type with freewheeling diode ...
|
|
Relay module with manually operated locking - PLC-RPT- 24DC/21HC/MS - 2910530
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation, integrated status LEDs and freewheeling diode, Push-in connection, 1 changeover contact, input voltage: 24 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Phoenix/Phoenix safety relays - REL-SR- 24DC/3X1AU/1X2AU/FG 1157954
Safety relays with mechanically interlocking contacts in accordance with DIN EN 61810-3 (Class A), input voltage 24 V DC, with multi-layer gold-plated contacts, 3 NO contacts and 1 NC contact
The maximum power consumption under rated conditions is 0.36 W
Test voltage Coil/contact 4 ...
|
|
REL-FO/L-110DC/2X21 - 1308307
Plug-in miniature relay, FASTON connection, 2 changeover contacts, status display: LED yellow, input voltage: 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 5x 107 switching cycles
Relay type: electromechanical relay
...
|
|
RIF-4-RSC-LV-120AC/3X21 relay module from Phoenix/Phoenix - 2903287
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 3 changeover contacts. Input voltage: 120 V AC
The maximum power consumption under the rated condition is 2.88 W
Test voltage ...
|
|
Phoenix/Phoenix Switches PLC-RSC- 24UC/ 1/S/H - 2982236
PLC-INTERFACE with switch (manual operation) for "manual, zero and automatic" functions, screw connection and integrated power contact relay for mounting on DIN rail NS 35/7.5, 1 NO contact, input voltage 24 V AC/DC
advantage
Only 6.2 ...
|
|
PLC-RPT-120UC/21HC -2900296 relay module from Phoenix
The PLC-INTERFACE is suitable for high continuous currents and includes PLC-BPT.../21 HC base terminals with plug-in connection with plug-in miniature relays for mounting on the DIN rail NS 35/7.5 with a limit continuous current of up to 10 A, 1 PDT, input voltage 120 V AC/DC
Excellent...
|
|
RIF-0-RSC-12DC/21 - 2903375 Phoenix/Phoenix relay module
Prefabricated relay modules with screw connections, including relay bases with ejection devices and high-power contact relays. Contact type: 1 changeover contact. Input voltage: 12 V DC
Maximum power consumption of 0.19 W under rated conditions
Test voltage (coil/contact) 4 kVr ...
|
|
Phoenix/Phoenix single relay REL-PR-BL- 24DC/4X21 1157980
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 24 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 switching cycles
Coil side
Rated input voltage UN 24 V DC
...
|
|
DEK-REL- 5/I/1 - 2941183 relay modules from Phoenix
Relay module with solid state miniature relay, contacts (AgNi+Au): Small to medium loads, 1 NO contact, input voltage 5 V AC/DC, can be mounted on NS 35/7.5, module thickness 6.2 mm
advantage
Reduced costs due to the elimination of N-terminals
Save up to 73 % on ...
|
|
REL-PR3-120AC/3X1 2903708 single relay from Phoenix
Plug-in high-power relay with power contacts, 3 N/O contacts, coil voltage: 120 V AC
Coil side
Rated input voltage UN 120 V AC
Input voltage range 102 V AC ... 132 V AC (20 °C)
Trunk frequency 50/60 Hz
Typical input current at UN ...
|
|
Contact
working hours
