The full bonding process of capacitive touch screen - TP and LCM direct bonding parts include the VA area (i.e., the view area) and the part outside the VA area.
What are the advantages of the optical lamination process selected for capacitive touch screens:
1. The capacitive touch screen uses optical lamination technology to eliminate the air between the screen, which helps to reduce the reflection between the flashing panel and the glass, which can make the screen look more transparent and enhance the flashing effect of the screen.
2. The screen will not enter the gray layer when using the full lamination skill, and it is more convenient for customers to assemble.
3. The use of optical lamination technology can effectively reduce the disturbance caused by the noise of the flashing panel to the touch signal.
4. The use of full lamination skills As far as the manufacturer is concerned, it can reduce the flashing of internal lines (shadow reduction) of the touch screen.
5. The use of optical lamination skills can also make the flash image more sober and thorough, and the picture quality more vivid; Let consumers experience the realism of high brightness and high image quality.
|
More on that
|
Touch screen alarm display setting – Hitec touch screen
There are two recommended ways to set up the alarm display on the touch screen:
1. Place the alarm window in the template, so that when the alarm occurs, no matter which screen the alarm window is on, it will automatically pop up, so that the operator can obtain the alarm information.
...
|
|
Operation of the Hitec touch screen
In order to better help you operate the Hitec touch screen, here are some operation methods and tips:
If you change the display resolution or display mode of the touchscreen when operating the capacitive touch screen in the middle of the operation, or adjust the refresh rate of the touchscreen controller by yourself...
|
|
Analysis of the advantages and disadvantages of Hitec capacitive touch screen
The light transmittance and clarity of the capacitive contact screen are better than those of the four-wire resistive screen, and of course, it cannot be compared with the external acoustic wave screen and the five-wire resistive screen**.
The reflection of the capacitive screen is severe, and the transmittance of the four-layer composite contact screen of the capacitive skill to each wavelength of light is uneven, and there is a problem of color distortion, ...
|
|
Industrial touch panel PC function - Hitech
Tablet PC is a relatively simple, natural, and practical new type of human-computer interaction technology machine and equipment, which is mainly used for some self-ribbed business processes. There are many types, among which the industrial contact tablet PC, which brings together computer technology, network technology, sound planning, ...
|
|
Precautions for purchasing industrial tablet PC - Hitech
Industrial tablet PC, that is, industrial all-in-one computer, consists of a contact screen, a display screen, a motherboard, memory, a hard disk, an I/O interface, etc. The scale is generally 8-21 inches, and the wide temperature and wide pressure planning is selected, which can be flexibly used in harsh environments such as temperature and application space, including vehicle-mounted, self-service terminals.
|
|
The defect of the capacitive touch screen - Hitec
The light transmittance and clarity of the capacitive contact screen are better than those of the four-wire resistive screen, and of course it cannot be compared with the external acoustic wave screen and the five-wire resistive screen.
The capacitive screen is severely reflective, and the four-layer composite contact screen of the capacitive skill has a strong impact on each wavelength ...
|
|
Precautions for Industrial Touch Screens – Hitech
At present, in the industrial field, intelligent industrial control equipment - programmable logic manipulator (PLC) is widely used in the automatic control of equipment, which brings great convenience to production and daily life. At the same time, visual human-machine interface (industrial touch screen) is also increasingly applied to industrial and agricultural production and its ...
|
|
How to choose the touch screen of industrial display - Hitec
1. Four-wire resistive touch screen:
It is not afraid of dust, oil and photoelectric disturbance, and is afraid of scratches is its main defect. It is suitable for public places with fixed users, such as industrial control sites, offices, homes, etc.;
2. Five-wire resistive touch screen:
Excellent sensitivity and transmittance ...
|
|
Resistance touch screen non-response detection method - Hitech
1) Check whether the connection of the touch screen is right, and whether the connection of a cable connected to the keyboard port of the host (take the working voltage of the 5 volt touch screen from the keyboard port) is connected, please check the connection.
2) Observe the situation of the touch screen controlling the box light, if ...
|
|
Precautions for man-machine interface touch screen all-in-one machine - Hitech
1. The touch screen part is a glass product, the glass corners are relatively sharp, and the assembly needs to be carried out with gloves/finger covers.
2. The touch screen part is a fragile glass product, and do not exert a strong impact on the touch screen during assembly.
3. Pick and place products ...
|
|
Capacitive touch screen cable fault solved
Capacitive touch screen skills use human current to detect jobs. The capacitive touch screen is a 4-layer composite glass screen. The inner and outer surface of the glass screen and the interlayer are coated with a layer of ITO, and the outermost layer is a thin protective layer of silica glass. Sandwich ITO coating for the working surface, 4 edges guiding 4 electrodes, internal ITO for ...
|
|
Taiwan Hitech launched a new touch screen
Taiwan Hitec launched the new touch screen PWX8700T-N and PWX8A00T-N touch screens, which have the following features and applications:
The smartest design planning software
★Office-style editing interface
★ Rich 3D style pre...
|
|
Touchscreen usage skills - Hitec
1. Run your app in full screen
Remove the file name bar and menu bar so you can enjoy the benefits of running the entire screen.
2. Choose bright colors (don't use black)
The bright color of the set can hide the finger prints, reduce the dazzling light and star...
|
|
The reason for choosing a vision system is Hitech
The visual system is a rising star in industrial automation, and the demand for work efficiency in modern industrial automation is constantly improving, and the traditional form of manual detection has been unable to meet the needs of production. The presentation of the machine vision system is a good replacement for the cumbersome traditional manual labor, which is suitable for ...
|
|
Key points of use of industrial touch screen all-in-one machine
Storage humidity between 10%-90% Temperature -20°C-60°C If the ambient conditions exceed or approach the critical value, condensation will occur inside the display. The power transformer and other coils inside are also prone to leakage when wet, and may even cause a short circuit in the wiring. If you find that the obvious ...
|
|
The difference between a display and a touch screen
Outsiders often misunderstand this kind of term, taking the common computer display screen as an example, it is only a kind of display screen, and its structure is fundamentally the same compared with the mobile phone screen, except for special models
Most computer graphics use a display screen structure that does not include a contact screen, and does not have a ...
|
|
Touchscreen interface design and operation
Step 1: Admit to powering on the touch screen and enter the touch screen welcome interface
Step 2: Press "Enter System" with one finger at the top of the welcome screen to enter the "System Main Screen"
Step 3: Parameter setting. ...
|
|
Common faults of Hitec touch screen and their maintenance methods
(1) Fault 1: Contact deviation
Phenomenon 1: The direction of the finger does not coincide with the mouse arrow.
Reason 1: After installing the driver, there is no vertical contact with the bullseye when calibrating the alignment.
...
|
|
Touch screen dimming fault analysis and treatment method - Hitec
Touch screen dimming fault phenomenon:
The touch screen has darkened and the colors are not displayed normally, but there is no problem with the operation.
Fault profiling :
The reason for this state of affairs may be that in the 2000s ...
|
|
What is the difference between inline and outboard installation of the touch screen?
Embedded device is a common installation method, which can make two objects fit together to form a whole, which looks simple, beautiful and does not take up space, which is the popular installation method at present.
In the industrial field, the device methods of industrial displays are rich and diverse, including snap-on, ...
|
|
Contact
working hours
