The visual system is a rising star in industrial automation, and the demand for work efficiency in modern industrial automation is constantly improving, and the traditional form of manual detection has been unable to meet the needs of production. The presentation of the machine vision system is a good replacement for the cumbersome traditional manual labor, and adapts to the development of modern production forms, especially in some working environments where labor is more risky. Most automated factories have begun to use vision systems in large quantities, so what is the reason for choosing vision?
1. Identify features that cannot be recognized by photoelectric sensors.
Vision systems can simplify inspection applications that are difficult for photoelectric sensors – such as the presence of screw threads or welded nuts in passenger car assembly.
2. Compared with photoelectric sensors, only less adjustment is required.
Unlike photoelectric sensors, which require frequent adjustments, vision systems can detect items at any speed and position on the production line.
3. Check the characteristics of a variety of components.
There is no limit to the number of component features that can be inspected by a vision system. For example, a vision system can check the presence of straws and jacks on juice packages together.
4. Set up, modify and monitor inspections on the smart display or PC.
The operator can set new parameters or adjust existing inspections on the PC. Visual system activities can be displayed on a touchscreen display, allowing operators to interact easily on the factory floor.
5. Accessories optimize the contrast of the picture and minimize blurring features.
Visual systems can be deployed with special light sources and filters to create better pictures and produce more consistent, reliable results.
6. No mechanical fixtures required
Items can be inspected anywhere on the conveyor belt, because the vision system is always looking for components.
7. No external trigger required.
The vision system uses a patented multi-picture analysis tool to determine the presence or absence of components, and then overcomes the problem of inaccurate component positioning.
|
More on that
|
The driving principle of the capacitive touch screen - Hitech
1. Projective capacitive contacts
Although the basic structure and working principle of a projected capacitive contact screen is the same as that of a four-wire impedance film, the projected capacitive impedance film does not go through the contact field, but captures the change in capacitance between the electrodes. Generally speaking, when using the form of a capacitive sensor, it can be ...
|
|
Precautions for purchasing industrial tablet PC - Hitech
Industrial tablet PC, that is, industrial all-in-one computer, consists of a contact screen, a display screen, a motherboard, memory, a hard disk, an I/O interface, etc. The scale is generally 8-21 inches, and the wide temperature and wide pressure planning is selected, which can be flexibly used in harsh environments such as temperature and application space, including vehicle-mounted, self-service terminals.
|
|
Hitec touch screen software
Hitec touch screen software can support the programming of all PWS series touch screens officially provided by Hitec, so that these touch screens can meet the daily work needs of users. You can modify the text, indicators, animations, curves, and so on displayed on the screen. Hitec HMI software is mainly used through ...
|
|
Common faults of Hitec touch screen and their maintenance methods
(1) Fault 1: Contact deviation
Phenomenon 1: The direction of the finger does not coincide with the mouse arrow.
Reason 1: After installing the driver, there is no vertical contact with the bullseye when calibrating the alignment.
...
|
|
Introduction to touch screen technology - Hitech
The contact screen, simply put, is the combination of input and output, no longer need mechanical buttons or sliders, the display screen is a human-machine interface.
The whole contact screen module is composed of LCD, contact screen, contact screen controller, main CPU, and LCD controller. The contact screen and the contact screen controller are the whole ...
|
|
Touchscreen click accuracy decreases - Hitech
Fault phenomenon: A touch screen, its click accuracy decreases, and the cursor is difficult to locate.
Fault analysis and processing
1) Run the touch screen calibration program. (Start - Settings - Control Panel - Acoustic Screen ---Capberate Button).
...
|
|
Hitec touch screen knowledge and testing methods
As an input device, the touch screen has the advantages of easy to use, ruggedness, fast response time, and space saving, and the user can use it directly through the contact screen to complete the operation, without the need for a keyboard or mouse, and is very practical and widely used.
...
|
|
Key points for the use of industrial control touch screen all-in-one machine - Hitec
Storage humidity between 10%-90% Temperature -20°C-60°C If the ambient conditions exceed or approach the critical value, condensation will occur inside the display. The power transformer and other coils inside are also prone to leakage when wet, and may even cause a short circuit in the wiring. If you find that the obvious ...
|
|
The touch screen is unresponsive after being used for a period of time - Hitec
Problem phenomenon: A contact screen has no response after normal use for a period of time after being turned on.
Problem profiling and processing
1. Check to see if the hard drive is turned off in the "Display Energy Saving Settings" of Wlndows9x. The way to do this is to right-click on the desktop and select the "Properties" ...
|
|
Advantages and disadvantages of touch screens – Hitech
Shortcoming:
1. Ambient light factor, infrared acceptance tube has the scale of operation between small sensitivity and large illumination, but the contact screen product can not limit the scale of use, from the dark song hall private room to the outdoor use under the high-intensity sunlight on Hainan Island, as a product, it must adapt.
...
|
|
How to duplicate the program on two Hitec touch screens
TWO HITECH TOUCH SCREEN COPY PROGRAM METHODS:
1. Make a communication cable first.
HMI1 COM port HMI2 COM port
25-pin female 25-pin female
RXD 3 ...
|
|
Frequently asked questions about HMIs
1. What is the difference between the human-machine interface and the "touch screen" that people often say?
In a strict sense, there is a fundamental difference between the two. Because the "touch screen" is only a hardware part that may be used in human-machine interface products, it is a kind of function that replaces the mouse and keyboard.
|
|
Industrial touch panel PC for dismantling and screen replacement - Hitec
In the use of industrial tablet computers, in many cases, there will always be some accidental situations, and it is likely that it will be necessary to disassemble and replace the screen before it can be processed.
1. Strong ...
|
|
Resistance touch screen non-response detection method - Hitech
1) Check whether the connection of the touch screen is right, and whether the connection of a cable connected to the keyboard port of the host (take the working voltage of the 5 volt touch screen from the keyboard port) is connected, please check the connection.
2) Observe the situation of the touch screen controlling the box light, if ...
|
|
Frequently Asked Questions on Human Machine Interface Products - Hitec
1. What is the difference between the human-machine interface and the "touch screen" that people often say?
Strictly speaking, there is a fundamental difference between the two. Because the "touch screen" is only a hardware part that may be used in human-machine interface products, it is a kind of replacement for the mouse and keyboard part of the function.
|
|
The working principle of the five-wire resistive touch screen - Hitech
The four ends of the touch screen RT, RB, LT, LB four poles, all participate in a uniform electric field, so that the lower layer (indium oxide) ITO GLASS is covered with a uniform voltage, the upper layer is the receiving signal device, when the pen or finger presses any point on the surface, at the finger press, the controller ...
|
|
Precautions for the use of industrial touch film screens - Hitec
1. The resolution needs to be fixed
Every time the screen resolution of the industrial touch film screen is adjusted, there will be some shifts, and the solution is to manually adjust or restart the machine, but this frequent adjustment is not good for the machine.
...
|
|
Human-machine interface technology - Hitec touch screen
NaturalID: NaturalID skills can meet the explosive increase in demand for biometric sensing, from mobile payment transactions and cloud services to enterprise mobile device security, including the entire ecosystem under FIDO (Online Fast Identity Authentication).
...
|
|
Touch screen control PLC method
The function of the touch screen is to control the soft relay of the plc, for example, if you use X3 as the start, then you can connect X3 in parallel in the PLC program, for example, M45, set a virtual button in the touch screen, and then set it to M45 action in its characteristics, then when the touch screen and PLC are connected, ...
|
|
Precautions for industrial-grade displays - Hitech
1. Make sure that the industrial-grade display is plugged and unplugged in when the power is off.
2. In order to ensure the stability and safety of the electrical equipment, the time interval between each turn on and off should not be less than 6 seconds.
3. The LCD screen is a fragile glass product; Any drops, hits, and ...
|
|
Contact
working hours
