IDEC/Izumi HS5B Safety Switch HS5B-02ZB

Compact 3-position enable switch with auxiliary contacts. Ergonomic OFF→ ON → OFF 3-position action for hazard avoidance. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...

By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.

IDEC/Izumi Safety Interlock HS6B Subminiature Safety Interlock Switch HS6B-12B01 2NC 1NO Contact, 1m Cable 30x15x78mm enclosure One-piece cables reduce wiring time IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage) Open directly ...

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 2 ⇒ 3 requires force and a clear sense of operation. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...

3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. （IEC60204-1； 9.2.5.8 ...

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 2 ⇒ 3 requires force and a clear sense of operation. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...

During mechanical operation, the guards/keys are securely locked. Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open. Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device. Key interlock type ...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

The non-contact safety switch with RFID technology improves the safety performance. Built-in safety features make the construction of a safety system independent of the combination with specific modules. Thanks to the RFID method, there is no error even if the door closes slowly. Even when installed on swing doors, sliding ...

The operating head detachment detection function is standard. The key is made of a high-security bullet lock. There are 16 key numbers to choose from. There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame. Adopt a small negative ...

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 2 ⇒ 3 requires force and a clear sense of operation. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...

Locks the guards until the machinery stops and the danger of inertia disappears. Key features: The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed. After the inertial action of the machine is stopped, the electrical signal of the controller ...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs. IP67 (IEC60529) protection structure is used for the contact parts. The NC contact has a direct disconnect operation structure. （IEC/EN60947 ...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

The operating head detachment detection function is standard. The key is made of a high-security bullet lock. There are 16 key numbers to choose from. There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame. Adopt a small negative ...

VA circuit, LOCK position key removal, 5m cable, rear unlock button Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the locked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length: 5 meters Our customer-centric ...

2 contacts, 2NC lock monitoring circuit, spring lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 GS-ET-19

The non-contact safety switch with RFID technology improves the safety performance. Built-in safety features make the construction of a safety system independent of the combination with specific modules. Thanks to the RFID method, there is no error even if the door closes slowly. Even when installed on swing doors, sliding ...

Multi-contact 3 position switch for large teach pendants. (max. 6 contacts) Key features: Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 2 ⇒ 3 requires force and a clear sense of operation. Press OFF (position 3) → ...