IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP7005

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

Product Introduction: VA circuit, key removal at unlock position, 3m cable Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the unlocked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length 3 meters Our customer-centric approach ...

The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed. When the inertial action of the machine stops, the electromagnetic coil excitation is unlocked by an electrical signal from the controller, etc., for greater safety. In the event of a power outage and maintenance, special tools can be used ...

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

VD circuit, unplug the key in the LOCK position, key 502,5m cable Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the locked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length: 5 meters Our customer-centric ...

During mechanical operation, the guards/keys are securely locked. Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open. Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device. Key interlock type ...

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 2 ⇒ 3 requires force and a clear sense of operation. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...

The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed. When the inertial action of the machine stops, the electromagnetic coil excitation is unlocked by an electrical signal from the controller, etc., for greater safety. In the event of a power outage and maintenance, special tools can be used ...

Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance. Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation. Reduction of operating force in position 2 ...

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

During mechanical operation, the guards/keys are securely locked. Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open. Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device. Key interlock type ...

Small size (external dimensions: 7mm× 16mm×51mm). Simple alignment during installation. Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type). IP67 protection structure. Product Specifications: Mechanical Specifications: Contact structure 2NO Environmental Specifications Protection...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

The non-contact safety switch with RFID technology improves the safety performance. Built-in safety features make the construction of a safety system independent of the combination with specific modules. Thanks to the RFID method, there is no error even if the door closes slowly. Even when installed on swing doors, sliding ...

VA circuit, LOCK position key removal, 5m cable, rear unlock button Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the locked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length: 5 meters Our customer-centric ...

IDEC/Izumi HS6B type safety switch HS9Z-A65 main features: 30mm×15mm×78mm small safety switch. 3 contacts of dual contact + auxiliary contact for applications with high safety requirements. （ISO13849-1, EN954-1） Available from 2 actuators on request ...

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 2 ⇒ 3 requires force and a clear sense of operation. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...

During mechanical operation, the guards/keys are securely locked. Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open. Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device. Key interlock type ...

4 Contacts, 2NC Gate, 2NC Lock, Monitoring Circuit, Electromagnetic Lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 GS-ET-19 ...

64x40x125 mm housing, direct opening action: If the doors are forcibly opened, the contacts will be disconnected even if they are welded or stuck, with or without indicator (red or green), available in 2 contact configurations (1NO/1NC or 2NC ), in accordance with ISO14119 ...