KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87951

Control Inputs: NPN Open Collector or No Voltage Contact Input (Timing Input, Reset Input, Auto-Zero Input, Judgment Output Cancellation Input, Synchronous Input, External Set Input) Control the output Tolerance setting: Upper/lower limit 2-level setting × 4 styles ( optional ...

KEYENCE CMOS Laser Displacement Sensor IL-065 Reference distance: 65 mm Measuring distance: 55 to 105 mm Bright spot range (at reference distance): approx. 550 × 1750 μm Linearity: ±0.1% F.S. (55 to 75 mm)*2*3 Repeatability: 2 μm*4 ...

Display panel LK-HD500 specification Type: Display unit Supported models: LK-G5000, LK-G5000P display Minimum display module: 0.001 μm Display range: ±999.999 μm to ±9999.99 mm (selectable in 7 stages) Show week ...

Introduction: Pursuit of a general-purpose digital contact sensor that is easy to use. peculiarity Environmentally resistant sensor: IP67 rated housing An error-free two-stage transformer method is designed Simplified installation reduces total cost Installation is simple and convenient Simplified ...

Sensor head cable 2 m Type: Sensor head-to-amplifier cable Length: 2 m Weight: approx. 110 g This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87903 product, if you are interested in KEYENCE/KEYENCE products, please also contact our ...

Sensor head spot type LK-H150 specification This article introduces KEYENCE/KEYENCE sensor head light spot type LK-H150 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our technology and service ...

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250CG Laser Sensor Standard M8 Connector Metal Sheathed Cable Type (Detection Distance: 250mm) *1 The cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m. ...

Description: KEYENCE's ultra-miniature amplifier discrete photoelectric sensor PS-N series of small, high-power, wide-ranging sensor head options for extended sensor head cables, high environmental resistance and cable extension capabilities provide enhanced installation versatility. ...

Connector cable M12 straight 2m standard Quantity: 1 End Shape: M12 Straight - Scattered Length: 2 m Material: Cable part: PVC, nut part: zinc nickel plating Weight: approx. 100 g This article introduces the KEYENCE/KEYENCE amplifier built-in TOF excitation ...

Threaded reflective type M12 connector type 240mm *1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. In addition, when "-99" is exceeded, the display will change to "-FF". *2 The FDA's (CDRH) laser classification is based on IEC6 ...

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH250 (10M) Laser Sensor Amplifier Split Type Sensor Head (Detection Distance: 250mm) with a cable length of 10m *1 According to Laser Notice No. 56 of the FDA (CDRH), the classification is carried out according to the IEC60825-1 standard.

IX-055 sensor head 55 mm specification *1 X: Laser long dimension direction, Y : Laser short dimension direction *2 When facing each other at the base distance. Scanning mode: When measuring with a height tool, a small measuring point, and no position correction. *3 Positive alignment at the reference distance

Slit plate φ0.5 square use Type: Slender for flat surfaces Number of Builts: 1pcs Slit plate size: ø0.5 Material: SUS304 Remarks: ・Detection distance: 30mm (when both transmit and receiver sides are attached) ・Transmission type only Weight; About 1 g This article introduces KEYENCE's ...

KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series Flat BGS Reflective M8 Connector Type 30mm PR-FB30CP specification In this article, we introduce the KEYENCE/KEYENCE SUBMINIATURE AMPLIFIER built-in photoelectric sensor PR-M/F Series PR-FB30CP products, ...

KEYENCE/KEYENCE Laser Sensor Amplifier Split Amplifier Cable Type Expansion Unit PNP LR-XN12P *1 When 500 μs is selected, the following limits are specified. · Tuning is limited to 2-point tuning. · The detection range shield is set during tuning. (The screen is not supported...)

Detection distance: 5m Cable type Laser classification 2 *1 Can be displayed from 50 to 5200. *2 The classification by the FDA (CDRH) is based on IEC60825-1 and is implemented in accordance with the requirements of Laser Notice No. 50. *3 I/O can be selected from the following combinations. ・Control ...

Cable M12 straight 10m between sensor and controller End shape: Sensor side: M12 4pin straight, controller: connector Length: 10 m Material: PVC (Vinyl Chloride) Weight: approx. 280 g *1 10 m type comes with 1 spare controller-side connection ...

Sensor head wide type LK-H057K specification This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H057K products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our technology and service ...

KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-F51C3PL Flat Permeable Type M8 Connector Type 0.6m *1 The number of control outputs for the M8 connector (3pin) type is one. If the model number ends with "D", it has an ON output when shading, ending with "L" ...

Reflective sensor with through-beam stability. It is not affected by the surface color, material, inclination, etc. of the workpiece. 316L stainless steel body shell, protection grade IP68/69K, can be used in various occasions. Launched high-power type Using the traditional* reflective transmission method that detects with light intensity...