KEYENCE/KEYENCE Display Panel LK-HD500

Square Reflective M8 connector type 250mm specification *1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF". *2 The FDA's (CDRH) laser classification is based on the IE ...

Sensor head Spot type laser class 2 LK-H052 specification This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H052 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our ...

Enclosure rating: IP67 (IEC60529) Ambient light: Incandescent/fluorescent: 5,000 lux*5 max Ambient temperature: 0 to +50 °C Relative humidity: 35 to 85 % RH (non-condensing) Seismic resistance: 10 to 55 Hz, double amplitude 1.5 mm, X,Y,Z ...

Sensor head cable 10 m Type: Sensor head-to-amplifier cable Length: 10 m Weight: approx. 400 g This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87905 product, if you are interested in KEYENCE/KEYENCE products, please also contact us ...

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250 Laser Sensor Standard Cable Type (Detection Distance: 250mm) *1 When 500 μs is selected, the following limits are specified. · Tuning is limited to 2-point tuning. · When tuning, the detection range screen is set ...

Installation Status: Diffuse Reference distance: 300 mm Enclosure Rating: IP67 (IEC60529)*8 Ambient light: Incandescent lamp: 10,000 lux*9 max Ambient temperature: 0 to +45 °C*10 Relative humidity: 85%RH or less (non-condensing) Seismic resistance: 1 ...

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH250 Laser Sensor Amplifier Split Type Sensor Head (Detection Distance: 250mm) with a cable length of 2 m *1 Classified according to Laser Notice No. 56 in the FDA (CDRH) according to the IEC60825-1 standard. This paper...

keyence CMOS Laser Displacement Sensor IL Series Sensor Probe IL-S025 Base distance: 25 mm Measuring distance: 20 to 30 mm Enclosure rating: IP67 Pollution level: 3 Ambient light: Incandescent lamp: 10,000lux*5 Ambient temperature: -1 ...

Mini slim BGS reflective M8 connector type 30mm PR-MB30C3PL specification *1 The number of control outputs for the M8 connector (3pin) type is one. If the model number ends with "D", it has an ON output when shading, and an ON output when it enters the light if it ends with "L". Example...

Summary: The LR-T series offers a variety of innovative features to detect previously thought undetectable targets. These features allow the user to tailor the sensor to the specific application, ensuring excellent detection performance. The LR-T Series provides stable detection from a position that does not obstruct the operator, eliminating the need for manipulation.

KEYENCE Sensor Head-Controller Cable 2m CB-A2 Length: 2 m Weight: approx. 200 g This article introduces the KEYENCE/KEYENCE Sensor Head-Controller Cable 2m CB-A2 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customers.

Reflective laser sensors with detection distances of up to 5 meters and installation restrictions. The distance detection principle is not affected by the surface of the object, and can detect a variety of workpieces. Excellent detection capabilities The LR-T series offers a variety of innovative features to detect targets previously thought undetectable. ...

Base distance: 600 mm Measuring distance: 200 to 1000 mm Enclosure rating: IP67 Pollution level: 3 Ambient light: Incandescent lamp: 5,000 lux*5 Ambient temperature: -10 to +50 °C (no condensation, no freezing) Relative humidity: 35 to 85 % RH ...

Introduction: The RGB digital fiber optic sensor CZ series can detect objects that cannot be detected by some sensors through 2 color screens and 3 sensing methods. Product parameters Model: CZ-12 Type: Area Beam Point, ...

Sensor head wide type LK-H085 specification This article introduces the KEYENCE/KEYENCE sensor head wide type LK-H085 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can give ...

Sensor controller handsetter specification *1 Displayed on the IX touch panel or PC software. *2 Can be set according to the program. *3 Diameter tool only, up to 8 pieces. *4 When sample hold (edge), peak/valley, and P-P hold (horizontal/edge) are set. ...

KEYENCE Multi-Point Laser Sensor OP-88042 Length: 1 m Note: Used for the connection between sensors, PCs or Ethernet switches. When using the IV Series as a UL certified product, use an NFPA79-capable Ethernet cable. This article introduces the KEYENCE/KE...

Base distance: 300 mm Measuring distance: 160 to 450 mm Enclosure rating: IP67 Pollution level: 3 Ambient light: Incandescent lamp: 5,000 lux*5 Ambient temperature: -10 to +50 °C (no condensation, no freezing) Relative humidity: 35 to 85 % RH ...

Enclosure rating: IP67 (IEC60529) Ambient light: Incandescent/fluorescent: 5,000 lux*5 max Ambient temperature: 0 to +50 °C Relative humidity: 35 to 85 % RH (non-condensing) Seismic resistance: 10 to 55 Hz, double amplitude 1.5 mm, X,Y,Z ...

Ethernet cable (M12 4pin-RJ-45) NFPA79 standard standard cable 5 m Type: NFPA79 standard Ethernet cable End shape: M12 4pin-RJ-45 Length: 5 m This article introduces the KEYENCE/KEYENCE multi-point laser sensor OP-87458 ...