IDEC/Izumi HS5D Safety Switch HS5D-02ZRN

Create Date: 2024-8-30 12:03:23|Source: IDEC/Izumi

  • Brand:
    IDEC/Izumi
    Origin:
    Japan
    Price:
    Please contact customer service
    Delivery time:
    Please contact customer service
    Model:
    HS5D-02ZRN
    Product Introduction
    It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
Product Description
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
IDEC/Izumi HS5D Safety Switch HS5D-02ZRN
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. The small form factor allows it to be installed in confined places. (30mm×30mm×91mm), supporting HS5 series universal actuators.

Double-insulated construction without grounding. By changing the mounting direction of the operating head, the actuator can be inserted in 8 directions, which can be adapted to various mounting needs.

The contacts are IP67 (IEC60529) protected.

The NC contact is a direct disconnect function. (IEC/EN60947-5-1), dedicated actuators reduce the risk of obsolescence. (ISO14119, EN1088), M3 wiring screws improve wiring efficiency.

Gold-plated contacts are available for small loads.

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.

This article introduces IDEC/Hequan HS5D type safety switch HS5D-02ZRN products, if you are interested in IDEC/Hequan, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.

More on that
IDEC/Izumi HS6B Subminiature HS6B-03B01 Safety Interlock Switch 3NC IDEC/Izumi HS6B Subminiature HS6B-03B01 Safety Interlock Switch 3NC

IDEC/Izumi HS6B Subminiature HS6B-03B01 Safety Interlock Switch 3NC 3NC Contact, 1m Cable 30x15x78mm enclosure One-piece cables reduce wiring time IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage) Direct door opening action ...

IDEC/Izumi HS1C-K Type Solenoid Safety Switch HS1C-K244R-G-T008 IDEC/Izumi HS1C-K Type Solenoid Safety Switch HS1C-K244R-G-T008

During mechanical operation, the guards/keys are securely locked. Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open. Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device. Key interlock type ...

IDEC/Izumi HS1E-K Solenoid Safety Switch 3 Circuit Type HS9Z-A3S IDEC/Izumi HS1E-K Solenoid Safety Switch 3 Circuit Type HS9Z-A3S

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VJ44ZM-G IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VJ44ZM-G

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VJ44ZM-G 4 contacts 1NC & 2NC, 1NO, spring lock 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA solenoid consumption Electromagnetic lock and snaplock models are available Rules...

IDEC/Izumi Safety Switch HS1B-11R IDEC/Izumi Safety Switch HS1B-11R

64x40x125 mm housing, direct opening action: If the doors are forcibly opened, the contacts will be disconnected even if they are welded or stuck, with or without indicator (red or green), available in 2 contact configurations (1NO/1NC or 2NC ), in accordance with ISO14119 ...

IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-R-T002 IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-R-T002

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

IDEC/Izumi HE1G Handheld Enabling Switch HE1G-21SM IDEC/Izumi HE1G Handheld Enabling Switch HE1G-21SM

3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. (IEC60204-1; 9.2.5.8 ...

IDEC/Izumi HE6B enabling switch IDEC/Izumi HE6B enabling switch

Compact 3-position enable switch with auxiliary contact. Key features: Compact 3-position enable switch with auxiliary contacts. Ergonomic OFF→ ON → OFF 3-position action for hazard avoidance. Press OFF (position 3) → release OFF (position 1) ...

IDEC/Izumi HS6E Submersible Locking HS6E-P44B03-G Safety Switch Spring Lock IDEC/Izumi HS6E Submersible Locking HS6E-P44B03-G Safety Switch Spring Lock

Key features: The world's thinnest solenoid interlock switch is 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually unlocked The LED indicator shows solenoid valve operation Standard 3m cable (can be ...

IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP7012 IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP7012

By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.

IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC5902 IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC5902

Small size (external dimensions: 7mm× 16mm×51mm). Simple alignment during installation. Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type). IP67 protection structure. Contact structure 1NC+1NO Our customer-centric service concept: ...

IDEC/Izumi HE1G Hand-held Enabling Switch IDEC/Izumi HE1G Hand-held Enabling Switch

Achieve an ergonomic grip. Built-in two hand-held enable switches with 3 positions. 3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. Use OFF (position 3) ⇒ release ...

IDEC/Izumi HE5B enabling switch HE5B-M2PN1 IDEC/Izumi HE5B enabling switch HE5B-M2PN1

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation. Reduction of operating force in position 2 ...

IDEC/Izumi HS3A Non-contact Safety Switch HS3A-H21U4 IDEC/Izumi HS3A Non-contact Safety Switch HS3A-H21U4

The non-contact safety switch with RFID technology improves the safety performance. Built-in safety features make the construction of a safety system independent of the combination with specific modules. Thanks to the RFID method, there is no error even if the door closes slowly. Even when installed on swing doors, sliding ...

IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP5015 IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP5015

By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.

IDEC/Hequan Safety Interlock HS5L Micro Lock HS5L-DD44M-G Interlock 4 Cnt Spring Lock IDEC/Hequan Safety Interlock HS5L Micro Lock HS5L-DD44M-G Interlock 4 Cnt Spring Lock

4 contacts, dual safety circuits, 1NC+1NC 1NC+1NC circuits, spring locks Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 ...

IDEC/Izumi HS1L Solenoid Safety Switch HS1L-DT44KMSRP-R IDEC/Izumi HS1L Solenoid Safety Switch HS1L-DT44KMSRP-R

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

IDEC/Izumi HS6E Submersible Locking HS6E-L7Y4B01-G Safety Switch Solenoid Lock IDEC/Izumi HS6E Submersible Locking HS6E-L7Y4B01-G Safety Switch Solenoid Lock

The world's thinnest solenoid interlock switch is 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually unlocked The LED indicator shows solenoid valve operation Standard 3m cable (available on request)

IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC5915 IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC5915

Small size (external dimensions: 7mm× 16mm×51mm). Simple alignment during installation. Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type). IP67 protection structure. Mechanical Specifications: Contact structure 1NC+1NO Functional Specifications: With or without an indicator ...

IDEC/Izumi HS5D Safety Switch HS5D-11ZRN IDEC/Izumi HS5D Safety Switch HS5D-11ZRN

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

CATEGORIES BYPASS
Customer Service Center

Online Consultation:QQ


ContactContact

Contact: Manager Huang

Contact QQ: 3271883383

Contact number: 13522565663


Scan the code to add WeChat (please save the picture first on the mobile phone)

working hoursworking hours

Weekdays: 9:00-17:00

Holidays: Only emergencies are handled

Contact us

Contact us

Contact number QQ consultation
QQ consultation

3271883383

Company address
Back to top