All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
In addition, there is a key interlock type with a standard portable key that can realize hostage control, so you can carry the portable key into large equipment to ensure safety.
The actuator is mounted on the safety gate, the safety switch is installed on the mechanical body, and the gate can be automatically locked mechanically.
When the inertial operation of the machine is stopped, the electromagnetic coil is unlocked by an electronic signal from the controller, etc., for greater safety.
This is a resin safety switch with a locking strength of 3000N∗ by strengthening the locking mechanism and actuator.
The actuator insertion port of the main body has been enlarged to improve the ability to cope with the shaking of the door.
The key interlock type is available with 10 keys to choose from, eliminating the need for key swapping between adjacent devices.
There are two directions in which the actuator is inserted.
Double-insulated structure without grounding wire.
∗ Notation is a lock strength value in the horizontal direction (parallel to the panel).
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces IDEC/Izumi HS1E-K type electromagnetic safety switch 3 circuit type HS1E-K844MSR-R-T002 products, if you are interested in IDEC/Izumi, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
IDEC/Izumi Safety Interlock HS5L Micro Lock HS5L-XD44M-G Interlock 2 CNT Spring Lock
2 Contacts, 1NC Gate, 1NC Monitor, Monitor Circuit, Spring Lock
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119
GS ...
|
|
IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC5915
Small size (external dimensions: 7mm× 16mm×51mm).
Simple alignment during installation.
Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type).
IP67 protection structure.
Mechanical Specifications:
Contact structure 1NC+1NO
Functional Specifications:
With or without an indicator ...
|
|
IDEC/Izumi HS5E-KVA003-2B501 Safety switch with key lock
VA circuit, key removal at unlock position, key 501, 3m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the unlocked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
Our customer-centric approach ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VJ7Y4ZM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VJ7Y4ZM-G 4 contacts 1NC & 2NC, 1NO, solenoid lock
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic lock and snaplock models are available
Rules...
|
|
IDEC/Izumi Safety Interlock HS6B Subminiature Safety Interlock Switch HS6B-12B01
IDEC/Izumi Safety Interlock HS6B Subminiature Safety Interlock Switch HS6B-12B01 2NC 1NO Contact, 1m Cable
30x15x78mm enclosure
One-piece cables reduce wiring time
IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage)
Open directly ...
|
|
IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-DH5RH Door Handle Actuator (Right)
IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-DH5RH Door Handle Actuator (Right)
Doorknob Actuator Handle Unit, Right Side Door
Product Category: Door Handle Actuators
The company has always been customer-centric, the concept of creating value for customers, and winning the market with quality and service.
|
|
IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC79110
Small size (external dimensions: 7mm× 16mm×51mm).
Simple alignment during installation.
Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type).
IP67 protection structure.
Mechanical Specifications:
Contact structure 2NO
Functional Specifications:
The detection distance is 10m
...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VG7Y4ZSM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VG7Y4ZSM-G 4 contacts 2NC, 1NO and 1NC, solenoid lock, side wires
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic locks and snap locks are available ...
|
|
IDEC/Izumi HS5E-K Series Key-Locking Safety Switch HS5E-KVD0L05-2C501
The operating head detachment detection function is standard.
The key is made of a high-security bullet lock. There are 16 key numbers to choose from.
There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame.
Adopt a small negative ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-XF7Y4ZM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-XF7Y4ZM-G 2 contacts 2NC, solenoid lock
5000N locking force is the smallest in the industry
Spring-clamp terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic lock and snaplock models are available
Mechanical Specifications:
Catheter opening ...
|
|
IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC7915
Small size (external dimensions: 7mm× 16mm×51mm).
Simple alignment during installation.
Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type).
IP67 protection structure.
Mechanical Specifications:
Contact structure 2NO
Functional Specifications:
Yes or no indicator Yes
...
|
|
IDEC/Izumi HE3B Enabling Switch HE3B-M2PN1
Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HS5D Safety Switch HS5D-11RNP
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi HE3B Enabling Switch HE3B-M2PB
Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HS5E-KVD005-2C Safety switch with key lock
VD circuit, key removal at LOCK position, 5m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the locked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
Our customer-centric service concept: ...
|
|
IDEC/Izumi HS1T HS1T-VD44ZLM-G solenoid safety switch
IDEC/Izumi HS1T Electromagnetic Safety Switch A high-locking strength solenoid safety switch suitable for large doors and large equipment.
Key features:
Locking strength of 5,000N or more, small size.
Rear locking release mechanical finger that can be confirmed on both the front and side ...
|
|
IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-DH5LH Door Handle Actuator (Left.)
IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-DH5LH Door Handle Actuator (Left.)
Doorknob Actuator Handle Unit, Left Hand Door
Product Category: Door Handle Actuators
The company has always been customer-centric, the concept of creating value for customers, winning the market with quality and service, ...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-DT44KMSRP-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-DT7Y4KMSRM-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS1L Electromagnetic Safety Switch HS1L-R44KMSR-R
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
Contact
working hours
