KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series Square Reflective Type (Background Suppression) Cable Type 15mm PR-FB15N3
specification
| Model | PR-FB15N3 | | type | BGS reflection | | output | NPN | | shape | bracket | | Connection patterns | 3M cables | | Detection distance | 1 to 15 mm | | Control the number of outputs | 2 | | Output actions | Output 1 | ON when light is in | | Output 2 | ON when shading | | Response time | Output 1 | 0.5 ms | | Output 2 | ON → OFF：2.7ms、OFF → ON：0.5ms | | Sensitivity adjustment | N/A | | Spot diameter | 2.5x4.5mm (at 15mm) | | light source | 4 Element Point Light Red LED (650nm) | | Prevent mutual interference function | 4 units | | Displays an indicator | Output Indicator (Orange), Steady Action Indicator (Green), Transmitted Transmitter: Power Indicator (Green) | | Control the output | 30 VDC or less, 50 mA or less | | Leakage current: | | 0.3 mA or less at 3 kΩ, 0.5 mA or less at 1 kΩ, 1.5 mA or less at 0.2 kΩ | | Residual Voltage: | | Less than 1.0 V at 10 mA, less than 1.5 V at 10 to 30 mA, and less than 2.0 V at 30 to 50 mA | | Protection circuits | Power supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection | | rated | Supply voltage | 10 to 30 VDC, including ripple (P-P) 10 % | | Current consumption | 19 mA | | Environmental resistance | Enclosure protection grade | IP67 (IEC60529)、IP69K (DIN40050-9)、4X、6P、13 (NEMA250) | | Insulation resistance | 20 MΩ or more (500 VDC) | | Ambient lighting | Incandescent lamp: 5,000 lx or less, Daylight: 20,000 lx or less | | Ambient temperature | -25 to +55 °C (no freezing) | | Store at ambient temperature | -25 to +75 °C | | relative humidity | 35 to 85 % RH (non-condensing) | | Withstand voltage | 1,000 VAC、50/60 Hz、1 min | | Earthquake resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions | | Impact resistance | 6 times each in the 1,000 m/s2, X, Y, Z directions | | Material | Housing: SUS316L, Indicator Housing/Lens Cover: Polysulfone, Cable Protective Cover: Polymethylpentene, Filling Material: Polyester Series Resin | | fittings | Operator's manual | | weight | About 40 g |
This article introduces the KEYENCE/KEYENCE ultra-compact amplifier built-in photoelectric sensor PR-M/F SERIES PR-FB15N3 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
KEYENCE/KEYENCE Amplifier Built-in TOF Laser Sensor LR-T Series OP-88030
Connector kit for sensor and controller connection for PUR cables
Type: Cable: PUR (Polyurethane) use
Target products: OP-87636/87637, OP-87640/87641
Weight: approx. 3 g
This article introduces the KEYENCE/KEYENCE amplifier built-in TOF laser sensor ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-M51P3
Mini Slim Permeable Cable Type 1.2m PR-M51P3
specification
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F SERIES PR-M51P3 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, I ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-MB15N1
Mini Slim Reflective Type (Background Suppression) Cable Type 15mm PR-MB15N1
specification
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F Series PR-MB15N1 products, if you are interested in KEYENCE/KEYENCE products, please contact ...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H022
Sensor head Spot type laser class 2 LK-H022
specification
This article introduces KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H022 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call ...
|
|
KEYENCE/KEYENCE Digital Ultrasonic Sensors FW Series UL Approved
Introduction: KEYENCE/KEYENCE Digital Ultrasonic Sensor FW Series uses a new algorithm A.W.S. (Active Wave Stabilizer) to achieve stable inspection without the influence of workpiece differences and ambient light. At the same time, this product has obtained CE mark certification and UL certification, which can be assured to make ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH100
KEYENCE/KEYENCE LR-XH100 Laser Sensor Amplifier Split Type Sensor Head (100mm Detection Distance) with a cable length of 2 m
This article introduces the KEYENCE/KEYENCE laser sensor LR-X series LR-XH100 products, if you are interested in KEYENCE/KEYENCE sensors, ...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-1500
Amplifier unit Panel mount IL-1500
Pollution level: 2
Ambient temperature: -10 to +50 °C (no condensation, no freezing)
Relative humidity: 35 to 85 % RH (non-condensing)
Shock resistance: 10 to 55 Hz, double amplitude 1.5 mm, 2 each in X, Y, Z ...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H080
Sensor head Spot Type LK-H080
specification
This article introduces KEYENCE/KEYENCE sensor head light spot type LK-H080 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our technology and service ...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-G5001P
Controller LK-G5001P
specification
This article introduces KEYENCE/KEYENCE CMOS laser displacement sensor controller LK-G5001P products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our technology ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor IX Series
Identifies the height of various locations within the area
The workpiece is captured by the camera and the specified point is tracked
The height of the specified point is identified by the laser
Lasers can detect the height and height difference of multiple points of the target at the same time, even if the product position is skewed.
Product Features:
A la carte ...
|
|
KEYENCE/KEYENCE Amplifier Built-in TOF Laser Sensor LR-T Series OP-87636
Connector cable M12 straight type 2m oil resistant
Quantity: 1
End Shape: Sensor Side: M12 4pin Straight, Cable Termination: Loose wire
Length: 2 m
Material: PUR (Polyurethane)
Weight: approx. 75 g
This article introduces the KEYENCE/KEYENCE amplifier ...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H053
Sensor head Spot type laser class 3B LK-H053
specification
This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H053 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our ...
|
|
KEYENCE/KEYENCE Digital Infrared Temperature Sensor FT Series Range 3000mm
Introduction: KEYENCE/KEYENCE Digital Infrared Temperature Sensor FT Series Depending on the application, it is possible to measure the target and the sensor at a certain distance, from small light spots to long-distance use, and various types of sensor heads are available to cope with various installation environments.
Features:
...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-F51P3
KEYENCE Subminiature Amplifier Built-in Photoelectric Sensor Square Permeable Cable Type 0.6m PR-F51P3
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F Series PR-F51P3 products.
|
|
KEYENCE/KEYENCE amplifier built-in CMOS laser sensor LR-Z series LR-ZB100C3P
Square Reflective Type M8 Connector Type 100mm
specification
*1 The M8 connector (3-pin) type does not have an external input function.
*2 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-M51N3
Mini Slim Permeable Cable Type 1.2m PR-M51N3
specification
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F SERIES PR-M51N3 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN12N
KEYENCE/KEYENCE Laser Sensor Amplifier Discrete Amplifier Cable Type Expansion Unit NPN LR-XN12N
*1 When 500 μs is selected, the following limits are specified.
· Tuning is limited to 2-point tuning.
· The detection range shield is set during tuning. (The screen is not supported...)
|
|
KEYENCE/KEYENCE Flow Sensor FD-M Series has a pressure resistance of 2.0 MPa
Introduction: KEYENCE/KEYENCE Flow Sensor FD-M Series The FD-M Series uses Faraday's law to determine the flow rate of conductive liquids. A typical electromagnetic flow sensor uses electrodes that are in contact with the liquid inside the test tube to detect the electromotive force of the liquid. The FD-M series is determined by electrostatic capacitance ...
|
|
KEYENCE/KEYENCE Sensor Head LJ-V7060K
Sensor head LJ-V7060K Reference distance: 54.6 mm
Enclosure rating: IP67 (IEC60529)*7
Ambient light: Incandescent lamp: 10,000 lux*8 max
Ambient temperature: 0 to +45 °C*9
Relative humidity: 85%RH or less (non-condensing)
Earthquake resistance: ...
|
|
KEYENCE/KEYENCE amplifier built-in TOF laser sensor LR-T series MU-CC4
Power cable for MU-N series
End Shape: Cable Termination: M12 4pin Straight, Controller: Connector
Length: 0.3 m
Material: PVC (Vinyl Chloride)
Remarks: For the main unit
Weight: approx. 30 g
This article introduces the KEYENCE/KEYENCE amplifier built-in type of TOF...
|
|
Contact
working hours
