KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X50C (Detection Distance: 50mm)

Create Date: 2024-8-30 12:03:23|Source: KEYENCE

  • Brand:
    KEYENCE
    Origin:
    Japan
    Price:
    Please contact customer service
    Delivery time:
    Please contact customer service
    Model:
    LR-X50C
    Product Introduction
    KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X50C Laser Sensor Standard M8 Connector Type (Detection Distance: 50mm)
Product Description
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X50C Laser Sensor Standard M8 Connector Type (Detection Distance: 50mm)
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X50C (Detection Distance: 50mm)

ModelLR-X50C
typeM8 connector type*1
Detection distance25.0 to 50.0 mm
Standard detection segment difference0.5 mm
Display resolution0.1 mm
The size of the spotApprox. 0.2 mm × Approx. 1.5 mm
(detection distance of 50 mm)
Response time500 μs*2 / 1 ms / 3 ms / 10 ms / 200 ms switchable
light sourcetypeGreen laser (505 nm)
Laser classClass 1 laser products (IEC60825-1, FDA (CDRH) Part1040.10*3)
IO-LinkSpecification v1.1 / COM2 (38.4 kbps)
functionTimer functionTimer Disable/Off Delay/On Delay/Single Pulse/On- Turn off Delay/Turn on Single Delay
Input and outputControl the outputNPN Open Collector / PNP Open Collector N.O. / N.C. Switched *4
30 VDC or less, 50 mA or less, residual voltage 2 V or less
External inputsExternal Setting Input/Emission Stop/Zero Input/Reset Hold/Orientation Alarm Cancellation Switchable *4
Short-circuit current NPN: 1 mA or less, PNP: 2 mA or less
The input time is ON for 3 ms or more, OFF for 20 ms or more
(25 ms ON or more, 25 ms OFF or more when tuning is selected only)
Protection circuitsPower supply reverse polarity protection, output overcurrent protection, output surge protection, output reverse polarity protection
power supplySupply voltage16 to 30 VDC (including ripple (P-P) 10% or less), class 2
Power consumptionTypical: 970 mW (less than 38 mA at 24 V, less than 53 mA at 16 V)
Economy mode ON and ALL: 821 mW (less than 32 mA at 24 V, less than 44 mA at 16 V) (except load current)
Environmental resistanceEnclosure protection gradeIP65 / IP67 (IEC60529)
Ambient lightingIncandescent lamps below 16,000 lux
Daylight 16,000 lux or less
Use ambient temperature-10°C to +50°C (no freezing)
Humidity of the working environment35 to 85% RH (non-condensing)
Vibration resistance10 to 500 Hz power spectral density: 0.816 G2/Hz in the X, Y, Z directions
Impact resistance1,000 m/s2 (100 G) X, Y, Z 6 TIMES IN EACH DIRECTION
MaterialSensor head cover: SUS316L, sensor head lens cover: PSU
Sensor head gasket: FKM (lens cap), EVM (cable)
Cable: PVC, metal sheath*5: SUS304
Amplifier Cover: PBT, Amplifier Indicator Window & Indicator: PAR, Amplifier Gasket: NBR, Button: POM
Amplifier M8 connector*6 : SUS303
annexInstruction manual, laser warning signs
weightAbout 35 g
*1 The cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m.

*2 When 500 μs is selected, the following limits are specified.

· Tuning is limited to 2-point tuning.

· The detection range shield is set during tuning. (Manual setting of the shielding range is not supported)

· Output 2 is limited to the output of alarms such as errors and orientation monitoring, and no standard/zone can be used.

*3 Classified according to Laser Notice No. 56 in the FDA (CDRH) according to the IEC60825-1 standard.

*4 Input and output can be selected from the following combinations. Control output × 2. Control output + external input

*5 LR-X50CG / X100CG / X250CG only

*6 LR-X50C (G) / X100C (G) / X250C (G) only

This article introduces the KEYENCE/KEYENCE laser sensor LR-X series LR-X50C (detection distance 50mm) products, if you are interested in KEYENCE/KEYENCE sensor, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!


More on that
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB15N3 KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB15N3

KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series Square Reflective Type (Background Suppression) Cable Type 15mm PR-FB15N3 specification In this article, we introduce the KEYENCE/KEYENCE SUBMINIATURE AMPLIFIER built-in photoelectric sensor PR-M/F Series P ...

KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H022 KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H022

Sensor head Spot type laser class 2 LK-H022 specification This article introduces KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H022 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call ...

KEYENCE/KEYENCE Communication Unit LK-CC100 KEYENCE/KEYENCE Communication Unit LK-CC100

Communication unit LK-CC100 specification This article introduces KEYENCE/KEYENCE communication unit LK-CC100 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you more ...

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11P KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11P

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11P Laser Sensor Amplifier Split Amplifier Cable Type Main Unit PNP *1 When 500 μs is selected, the following limits are specified. · Tuning is limited to 2-point tuning. · The detection range is set during tuning.

KEYENCE/KEYENCE Laser Sensor LR-TB2000/5000 Reflectivity KEYENCE/KEYENCE Laser Sensor LR-TB2000/5000 Reflectivity

Summary: The LR-T series offers a variety of innovative features to detect previously thought undetectable targets. These features allow the user to tailor the sensor to the specific application, ensuring excellent detection performance. The LR-T Series provides stable detection from a position that does not obstruct the operator, eliminating the need for manipulation.

KEYENCE/KEYENCE amplifier built-in TOF laser sensor LR-T series MU-CB2 KEYENCE/KEYENCE amplifier built-in TOF laser sensor LR-T series MU-CB2

Power cable for MU-N series End Shape: Cable Termination: 2 Core Loose Wire, Controller: Connector Length: 2 m Material: PVC (Vinyl Chloride) Remarks: For extended units Weight: approx. 100 g This article introduces the KEYENCE/KEYENCE amplifier built-in TOF laser ...

KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H022K KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H022K

Sensor head Spot Type LK-H022K specification This article introduces KEYENCE/KEYENCE CMOS laser displacement sensor controller LK-H022K products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope we ...

KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series Adjustable Bracket OP-87404 KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series Adjustable Bracket OP-87404

Adjustable bracket OP-87404 Type: Adjustable stand Target products: LR-Z series Material: Bracket: Zinc nickel plated/SUS430, Bolt: Copper nickel plated, Nut: Iron nickel plated, Screw for sensor mounting: SUS316L Weight: approx. 95 g This article introduces KEYENCE/KEYENC ...

KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H027K KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H027K

Sensor head wide type LK-H027K specification This article introduces KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H027K products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our ...

KEYENCE/KEYENCE Optoelectric Sensor with Built-in Ultra-Small Amplifier PR-M/F Series OP-87671 KEYENCE/KEYENCE Optoelectric Sensor with Built-in Ultra-Small Amplifier PR-M/F Series OP-87671

Slit plate 0.5×3 square use Type: Slender for flat surfaces Number of Builts: 1pcs Slit plate size: 0.5×3 Material: SUS304 Remarks: ・Detection distance: 120 mm (when both transmit and receiver sides are attached) ・Transmission type only Weight: approx. 1 g This article introduces the ...

KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87952 KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87952

LAN cable (RJ-45-RJ-45) 5 m Length; 5 m Weight: approx. 300 g This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87952 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to hearing from you.

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH250(10M) KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH250(10M)

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH250 (10M) Laser Sensor Amplifier Split Type Sensor Head (Detection Distance: 250mm) with a cable length of 10m *1 According to Laser Notice No. 56 of the FDA (CDRH), the classification is carried out according to the IEC60825-1 standard.

KEYENCE/KEYENCE Sensor Head Spot Type LK-H052K KEYENCE/KEYENCE Sensor Head Spot Type LK-H052K

Sensor head Spot Type LK-H052K specification This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H052K products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our technology and service ...

KEYENCE/KEYENCE Proximity Sensor EM Series Detection Distance: 8mm KEYENCE/KEYENCE Proximity Sensor EM Series Detection Distance: 8mm

Description: Proximity sensor EM series ultra-small sensor head, small size, sensor amplifier in cable, with built-in LED indicator, detection distance up to 8mm. Rugged, flexible cables and IP-67 waterproof housing. ...

KEYENCE/KEYENCE Metal Proximity Sensor ED Series Stand-Alone Type KEYENCE/KEYENCE Metal Proximity Sensor ED Series Stand-Alone Type

Introduction: KEYENCE's ED series can detect all metals, the long-range proximity sensor can detect non-ferrous metals including aluminum, and has a built-in stable operation indicator. Product parameters Our customer-centric service concept: ...

KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A5E KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A5E

Sensor head – extension cable for controller 5m CB-A5E Length: 5 m Weight: approx. 400 g This article introduces the KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A5E products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service ...

KEYENCE/KEYENCE Laser Sensor LR-X Series Mounting Bracket OP-88245 KEYENCE/KEYENCE Laser Sensor LR-X Series Mounting Bracket OP-88245

KEYENCE Laser Sensor LR-X Series Mounting Bracket OP-88245 Type: Amplifier mounting bracket Summary: Can be installed without a DIN rail. This article introduces the KEYENCE/KEYENCE Laser Sensor LR-X Series Mounting Bracket OP-88245 product, ...

KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB240CB KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB240CB

Threaded reflective type M12 connector type 240mm *1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. In addition, when "-99" is exceeded, the display will change to "-FF". *2 The FDA's (CDRH) laser classification is based on IEC6 ...

KEYENCE/KEYENCE Multi-Point Laser Sensor IX Series KEYENCE/KEYENCE Multi-Point Laser Sensor IX Series

Identifies the height of various locations within the area The workpiece is captured by the camera and the specified point is tracked The height of the specified point is identified by the laser Lasers can detect the height and height difference of multiple points of the target at the same time, even if the product position is skewed. Product Features: A la carte ...

KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-S025 KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-S025

keyence CMOS Laser Displacement Sensor IL Series Sensor Probe IL-S025 Base distance: 25 mm Measuring distance: 20 to 30 mm Enclosure rating: IP67 Pollution level: 3 Ambient light: Incandescent lamp: 10,000lux*5 Ambient temperature: -1 ...

CATEGORIES BYPASS
Customer Service Center

Online Consultation:QQ


ContactContact

Contact: Manager Huang

Contact QQ: 3271883383

Contact number: 13522565663


Scan the code to add WeChat (please save the picture first on the mobile phone)

working hoursworking hours

Weekdays: 9:00-17:00

Holidays: Only emergencies are handled

Contact us

Contact us

Contact number QQ consultation
QQ consultation

3271883383

Company address
Back to top