Introduction: Rosemount/Rosemount Natural Gas Gas Chromatograph 770XA, Rosemount 770XA Natural Gas Gas Chromatograph accurately analyzes natural gas in an explosion-proof transmitter-style product design. With its parallel chromatography capabilities and ATEX/IECEX safety ratings, the Rosemount 700XA is ideal for natural gas custody transfer and applications requiring advanced gas composition analysis such as C9+ and hydrocarbon dew point (HCDP) calculations, C6+ and total sulfur measurements. The field-mountable design of the Rosemount 770XA GC reduces the need for occlusion or temperature control for complex analyzers.
Features:
The industry's first chromatograph to combine natural gas energy content, hydrogen sulfide, trace levels of total sulfur morphology, and hydrocarbon dew point (HCDP) calculations in a single analyzer solution.
Its flameproof and ATEX/IECEX safety ratings allow for enclosure-free installation even in Class 1 Category 1 areas
Instrument air without the need for a purge or furnace reduces the consumption of power consumption achieved with traditional scavenging gas chromatograph units
The ability to work remotely securely facilitates audit inspections and reduces the need for access to remote locations
Wide dynamic measurement range with component concentrations ranging from percent to trace levels
Miniature Flame Photometric Detector (μ FPD) and Miniature Flame Ionization Detector (μ FID) with ppb sensitivity
Thermal Conductivity Detectors (TCDs) are sensitive to the lowest ppm level
Reliable performance over a wide ambient temperature range (-20 °C to 60 °C / -4 °F to 140 °F, depending on the application)
Fully compatible with modern Ethernet and DCS communications
Memory capacity up to 2,500 chromatograms, including sample calibration and calibration of the flow path
Product parameters
Input:
Analog inputs: 2 standard isolated inputs, filtered with transient protection, 4–20 mA (expandable and assignable by user)
Digital inputs: 5 inputs, user-assignable, optically isolated, rated at 30V DC @ 0.5 A
Output:
Proposed outputs: 6 self-powered isolated outputs (4–20 mA)
Digital outputs: 5 user-assignable outputs, C-type and electro-mechanical isolated, 24V DC
Communication Protocol:
Ethernet: Two ports – an RJ-45 port and a four-wire port – with speeds of 10/100 mbps
Serial: Three terminal blocks, configurable as RS-232, RS-422 or RS-485, and one RS-232 D-sub (9-pin) Modbus/PC connection
Power supply:
Standard: 24V DC (21–30 VDC)
Optional: 90–264V AC, 47–63 Hz
Certificates/Certifications:
United States CSA: Class I, Division 1, AEx d IIC, Enclosure Type 4. Class I, Class 1, Groups B, C and D, IP66
Canada CSA: Class I, Zone 1, Ex d IIC, Enclosure Type 4. Class I, Class 1, Groups B, C and D, IP66.
ATEX/IECEx。 Ex II 2G。 Ex d IIC Gb T6。 (Ta = -20 °C to 60 °C)
Size:
Wall mount: 711 mm H x 445 mm W x 498 mm D (28" H x 17.5" W x 19.6" D)
Duct mounting: 711 mm H x 445 mm W x 671 mm D (28" H x 17.5" W x 26.4" D)
Ground mounting: 1532 mm H x 445 mm W x 612 mm D (60.3" H x 17.5" W x 24.1" D)
Installation: Floor Mount (Standard), Wall Mount or Duct Mount (Optional)
Weight: 50 kg (110 lbs.)
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.
This article introduces the Rosemount/Rosemount Natural Gas Chromatograph 770XA product, if you are interested in the Rosemount/Rosemount Natural Gas Chromatograph, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Rosemount/Rosemount Electromagnetic Flowmeter Sensor 8705120 15-900mm diameter
Description: The Rosemount/Rosemount electromagnetic flowmeter sensor is 8705120, with an all-welded construction that provides an airtight port for moisture and contaminant protection, while the junction box is removable and replaceable for easy field service.
Features:
For maximum protection, ...
|
|
Rosemount/Rosemount pH/ORP Sensor 398 Measuring range pH 0—14
Description: The Rosemount/Rosemount pH/ORP Sensor 398 features a Tefzel® and titanium chemically resistant construction and a patented TUpH™ reference wet, making it an ideal sensor for measuring the pH of demanding process liquids. This sensor is used to measure acid water strippers, ...
|
|
Rosemount/Rosemount Liquid Ultrasonic Flow Meter USM381410
Description: The Rosemount/Rosemount Liquid Ultrasonic Flow Meter USM381410, a new custody transfer meter with excellent linearity over the flow range to further reduce product loss and unidentified loss. A new generation of electronics optimizes the operation of the flow meter, and the full-bore design ensures that the flow meter is ...
|
|
Rosemount/Rosemount Electromagnetic Sensor MS100 Reference Accuracy±0.25%
Introduction: The Rosemount/Rosemount electromagnetic sensor MS100 is a reliable solution for difficult-to-measure applications such as grit, high solids fluids, long fiber slurries, or devices that generate excessive process noise. The MS slurry sensor is designed for applications that are difficult to measure, ...
|
|
Rosemount/Rosemount 397 TUpH™ pH/ORP sensor
Introduction: Rosemount/Rosemount 397 TUpH™ pH/ORP Sensor, the low-maintenance Rosemount 397 pH/ORP sensor provides pH and ORP measurements in aqueous solutions containing large amounts of suspended solids for long lifetime and high performance.
...
|
|
Rosemount/Rosemount Advanced Sonic Gas Ultrasonic Flow Meter USM341724
Description: The Rosemount/Rosemount Advanced Sonic Gas Ultrasonic Flow Meter USM341724 leverages the power of a field-proven, United Kingdom-designed Rosemount four-channel string meter (OIML R137 1&2 accuracy class 0.5) designed by Towngas, combined with ...
|
|
The Rosemount/Rosemount Low Flow Conductivity Sensor 404 cable is 3.1m in standard length
Introduction: The Rosemount/Rosemount Low Flow Conductivity Sensor 404 can be used to measure the conductivity of clean water. The sensors and flow cells are combined into a separate package. Because the retention volume of the flow cell is small, it reacts more quickly to sudden changes in conductivity and temperature. 404 Sensing ...
|
|
Rosemount/Rosemount Immersive/Insertive pH Sensor 396 0-100°C
Introduction: The Rosemount/Rosemount Immersive/Plug-in pH Sensor 396, the Rosemount 396 sensor is ideal for pH measurement in harsh, dirty, and abrasive applications with large amounts of suspended solids. The durable sensor design and TUpH reference technology ensure that the sensor is designed to be used in a variety of ...
|
|
Rosemount/Rosemount Electromagnetic Sensor MS200 Pipeline size 80-900mm
Introduction: The Rosemount/Rosemount electromagnetic sensor MS200, MS slurry sensor is a reliable solution for difficult-to-measure applications such as grit, high-solids fluids, long fiber slurry, or devices that generate excessive process noise. The MS slurry sensor is designed for difficult-to-measure...
|
|
Rosemount/Rosemount Flanged Vortex Flow Meter 8800DF015
Introduction: The Rosemount/Rosemount Flanged Vortex Flow Meter 8800DF015 eliminates potential leak points with a gasket-free, anti-clogging gauge body. Discrete sensors facilitate the replacement of flow and temperature sensors without damaging the process seal.
Features:
Isolated sensor design allows for ...
|
|
Rosemount/Rosemount 4+2 Dual-Configuration Gas Ultrasonic Flowmeter 3416
Introduction: The Rosemount/Rosemount 4+2 Dual-Configuration Gas Ultrasonic Flowmeter 3416, Rosemount 3416 4+2 Ultrasonic Flowmeter combines a proven Rosemount four-channel British Gas string meter (validated to OIML R137 1&2 accuracy class 0.5) and ...
|
|
Rosemount/Rosemount Plug-in Conductivity Sensor 141
Introduction: The Rosemount/Rosemount Plug-in Conductivity Sensor 141 is designed for clean, low conductivity applications. The 141 sensor comes with a 3/4" MPT process connection that can be mounted directly into the process pipe, vessel, or flow-through tee. The sensor offers up to 200° ...
|
|
The Rosemount/Rosemount Temperature Transmitter 3144P outputs 4-20mA
Introduction: The Rosemount/Rosemount Temperature Transmitter 3144P, Rosemount X-well technology accurately measures internal process temperatures without the need for thermowelling or process perforation. Process temperatures can be safely recorded without cutting pipes and flow frequencies or process shutdowns can be calculated. Convert each temperature ...
|
|
Rosemount/Rosemount Slurry Electromagnetic Flowmeter Sensor 8707240 Power consumption 300W
Introduction: The Rosemount/Rosemount Slurry Electromagnetic Flowmeter Sensor 8707240 provides enhanced signal strength along with advanced signal processing and superior filtration technology for flow metering stability in the most difficult, noisy slurry applications.
Features:
...
|
|
Rosemount/Rosemount Slurry Electromagnetic Flowmeter Sensor 8707140 Power consumption up to 300W
Introduction: The Rosemount/Rosemount Slurry Electromagnetic Flow Meter Sensor 8707140 provides enhanced signal strength along with advanced signal processing and superior filtration technology for flow metering stability in the most difficult, noisy slurry applications.
Features:
...
|
|
Rosemount/Rosemount Sensor 3500P PERpH-X™ pH/ORP
Introduction: Rosemount/Rosemount Sensor 3500P PERpH-X™ pH/ORP, The Rosemount 3500P PERpH-X™ pH/ORP sensor incorporates innovative design technologies to extend the life of the sensor in harsh environment applications. Sensor's double hydraulic reference cell ...
|
|
Rosemount Electromagnetic Flowmeter 8750W360 Caliber 0.15-8in
Description: The Rosemount/Rosemount Electromagnetic Flowmeter 8750W360, with its reliable, all-welded coil housing and lightweight sensor design (IP68 rating) ensures that the meter is compatible with all utility, water and wastewater applications. Certified for drinking water.
Product Features ...
|
|
Rosemount/Rosemount Primary Sonic Gas Ultrasonic Flowmeter USM341204
Introduction: Rosemount primary sonic gas ultrasonic flowmeters USM341204 for non-legal-for-trade metering of natural gas, such as verification metering, pipeline balancing, storage measurement, production or moisture metering. Featuring Mark III electronics and two-channel measurement redundancy.
...
|
|
Rosemount/Rosemount Transmitter 8782 Power supply 12—42VDC
Description: The Rosemount/Rosemount Transmitter 8782 is ideal for high-noise applications that require very high performance. The 8782 products use our latest advanced signal processing technology to stabilize otherwise noisy process flow signals without sacrificing responsiveness. Advanced Signal Division ...
|
|
Rosemount/Rosemount Non-Contact Radar Level Gauge 3408
Introduction: Rosemount/Rosemount Non-Contact Radar Level Gauge 3408, Rosemount 3408 Non-Contact Radar Level Gauge is a versatile FMCW radar for level measurement and overfill protection in industries such as chemicals. Smart features save time and maximize efficiency ...
|
|