SoftTouch/Rorobot Module B-4A30[P]/M

Create Date: 2024-8-30 12:03:23|Source: Soft Touch/Rorobot

Previous
Next
Brand:
Soft Touch/Rorobot

Origin:
Suzhou

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
Module B-4A30[P]/M

Product Introduction
Soft-Touch/Rorobot Module Module B-4A30[P]/M Straight-through or side-through intake is available

quality assurance

Attentive service

Secure transactions

Product Description

Introduction: Rorobot module B-4A30[P]/M, is a slender soft claw, suitable for jelly shells, test tubes, badminton, cylindrical, hollow columns and other fragile and fragile objects of non-destructive inner support handling and sorting, to ensure that the product will not be scratched, reduce the defect rate. When multiple soft jaws are connected in series, the soft jaws can maintain a high degree of consistency and synchronization, which can be used in food, sports equipment, medical industries, etc.

Features:

It can be installed in the Straight Air Inlet Connection Module [CM] series or the Side Air Inlet Flange Connection Module [FCM] series

Straight-through air intake or side-through intake is available

The fingertip is open in the positive pressure state, and clamped in the negative pressure state, it is recommended to use it with the soft-touch air driver, and the fingertip distance G can be adjusted by working positive pressure

The soft beak B-4A30[P]/M can be replaced separately

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.

This article introduces the soft touch/Rorobot module module B-4A30[P]/M products, if you are interested in the soft touch/Rorobot module, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience. SoftTouch/Rorobot module

More on that

	柔触/Rorobot 法兰连接模块FCM-R08 简介：柔触/Rorobot 法兰连接模块FCM-R08 　　产品特点　　符合ISO9409-1：2004（即标GB/T 14468．1·2006/）适配于市面上大部分机器人，法兰。　　建议大负载20kg 　　适合非标夹爪组合 ...
	柔触/Rorobot 手指模块B4V3 手指宽度18mm 简介：柔触/Rorobot 手指模块B4V3，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调。　　产品特点　　特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及 ...
	柔触/Rorobot 机器人柔爪BMC-1G071010[LP]/S 建议负载12g 简介：柔触/Rorobot 机器人柔爪BMC-1G071010[LP]/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，指尖与工件距离G可使用工作气压调节。　　柔爪材质分为 ...
	柔触/Rorobot 柔爪BMC-3C12[H]/S 简介：柔触/Rorobot 柔爪BMC-3C12[H]/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距D可使用工作气压调节。　　柔触材质分为常规型[H]和无痕 ...
	柔触/Rorobot 柔爪BMC-2G1624[HB]/S 开合频率6次/秒简介：柔触/Rorobot 柔爪BMC-2G1624[HB]/S 　　产品特点　　真空状态夹紧，正压状态指尖打开，可由真空直接驱动　　配合柔触空气驱动器使用(正负压切换驱动)可提升夹持工件尺寸　　柔爪 ...
	柔触/Rorobot 柔爪B-4H18[HAS]/S 简介：柔触/Rorobot 柔爪B-4H18[H]/S 　　产品特点　　正压状态指尖打开，负压状态夹紧，建议配合柔触空气驱动器使用，外撑指尖距D可使用工作气压调节。　　柔爪材质分为常规型[H和无痕型[ ...
	柔触/Rorobot 手指模块B3V4 正压行程9mm 简介：柔触/Rorobot 手指模块B3V4，特点及适用场景:夹持力**大，可串联(使用螺丝配件包PK)使用并简化气管布置。多用于多条手指同时工作且工件间紧凑的场景，工件宽度-般大于50mm。　　产品特 ...
	Rorobot BMC-3G20[HAS]/S The recommended load is 60g Introduction: Rorobot Robot Soft Jaw BMC-3G20[HAS]/S, B-3G20[H]/S is a strong small soft jaw that can grasp relatively heavy workpieces outside. Clamping force (0-0.6N) and clamping range (3-13mm), the recommended load is 60g. Compensates for the other three-finger soft claws in gripping higher ...
	柔触/Rorobot 法兰连接模块FCM-S01 简介：柔触/Rorobot 法兰连接模块FCM-S01，法兰连接模块[FCM]是机械臂末端和滑移安装板[SMP]之间的连接件，可配合快换模块[QCM]使用,分为弹簧杆式(S)和固定杆式(R)。　　产品特点　　符合IS ...
	Soft Touch/Rorobot Finger Module B6V5 Fingertip travel 53mm Introduction: Rorobot Finger Module B6V5, Features and Applicable Scenarios: The module is thinner and lighter, and the minimum finger spacing of the mounting module is only 10mm, which is suitable for clamping tiny, thin and light workpieces. It can also be used in series (using the screw kit PK), but compared to the V4, each finger needs to be supplied with air independently.
	柔触/Rorobot 柔爪BMC-3B14[P]/S 建议负载12g 简介：柔触/Rorobot 柔爪BMC-3B14/S 　　产品特点　　正压状态指尖打开，负压状态夹紧，建议配合柔触空气驱动器使用，内撑指尖距D可使用工作气压调节。　　柔爪材质分为常规型和无痕型，当 ...
	柔触/Rorobot 手指模块A3V5 模块高度58mm 简介：柔触/Rorobot 手指模块A3V5，特点及适用场景:模块更轻薄，安装模块指间距**小仅有10mm,适合夹取微小，轻薄的工件。也可串联(使用螺丝配件包PK)使用，但与V4相比，每个手指都需要独立供气 ...
	柔触/Rorobot 柔爪BMC-4BG64[P]/S 开合频率6次/秒简介：柔触/Rorobot 柔爪BMC-4BG64/S，B-4BG64/S 是一款外抓式柔爪，推荐夹持工件尺寸(28-50)mm,开合尺寸在（50.4-80）mm，适合抓取蒸蛋糕、包子、烧麦以及枣糕等这类柔软的食品，B-4BG64/S 是 ...
	柔触/Rorobot 柔爪BML-4G64[H]/S 开合频率6次/秒简介：柔触/Rorobot 柔爪BML-4G64[H]/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距G可使用工作气压调节。　　柔触材质分为常规型[H]和无痕 ...
	柔触/Rorobot 柔爪B-4B40[P]/S 建议负载300g 简介：柔触/Rorobot 柔爪B-4B40/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距G以及外撑指间距D可使用工作气压调节。　　柔触材质分为常规 ...
	柔触/Rorobot 柔爪BMC-1G071010[P]/S 简介：柔触/Rorobot 柔爪BMC-1G071010/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，夹持指尖距G可使用工作气压调节。　　柔爪材质分为常规型和无痕型 ...
	柔触/Rorobot 手指模块A5V4 自重111g 简介：柔触/Rorobot 手指模块A5V4，特点及适用场景:夹持力**大，可串联(使用螺丝配件包PK)使用并简化气管布置。多用于多条手指同时工作且工件间紧凑的场景，工件宽度-般大于50mm。　　产品特 ...
	柔触/Rorobot 柔爪BML-3A18[HAS]/S 简介：柔触/Rorobot 柔爪BML-3A18[HAS]/S，B-4BG64/S 是一款外抓式柔爪，推荐夹持工件尺寸(28-50)mm,开合尺寸在（50.4-80）mm，适合抓取蒸蛋糕、包子、烧麦以及枣糕等这类柔软的食品，B-4BG64/S ...
	柔触/Rorobot 手指F-C5 指尖行程27mm 简介：柔触/Rorobot 手指F-C5 　　产品特点　　手指材质可选择常规型，增强型[H]以及防静电型[AS]。　　增强型材质[H]拥有更高的工作压力范围,夹持力**高达到常规材质手指的300%。　　防 ...
	柔触/Rorobot 柔爪BMC-4G64[H]/S 简介：柔触/Rorobot 柔爪BMC-4G64[H]/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距G可使用工作气压调节。　　柔触材质分为常规型[H]和无痕 ...