Plug-in miniature power relay with power contacts for high impulse currents up to 130 A peak, 1 NO contact, input voltage: 24 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 16 A
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 3x 107 switching cycles
Insulation characteristics
Overvoltage category III
Pollution level 3
Insulation: Safety isolation, reinforced insulation
The maximum power consumption under rated conditions is 0.41 W
Test voltage 5 kV AC (50 Hz, 1 minute, coil/contact)
Rated insulation voltage 250 V AC
Rated overvoltage 6 kV
Coil side
Rated input voltage UN 24 V DC
Input voltage range 19.2 V DC ... 54 V DC
The input voltage range referenced to UN is shown in the graph
Typical input current at UN is 17 mA
Typical response time is 8 ms
Typical release time is 3 ms
Coil resistance 1440 Ω ±10 % (20 °C)
handoff
Contact Type: 1 N/O contact
Switch contact type Single contact
Drive and function monostability
Contact material AgSnO
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 12 V (100 mA)
Limit continuous current to 16 A
Maximum start-up current 80 A (20 ms)
130 A (peak, capacitive load, 230 V AC, 24 μF)
Minimum switching current 100 mA (for 12 V DC)
Maximum power rating (resistive load) 384 W (24 V DC)
58 W (can be used for 48 V DC)
48 W (for 60 V DC)
50 W (can be used for 110 V DC)
80 W (can be used for 220 V DC)
4000 VA (can be used for 250VAC)
Minimum on-off capacity 1200 mW
Switching capacity 2 A (at 24 V, 13 DCs)
0.2 A (at 110 V, 13 DCs)
0.2 A at 250 V, 13 DCs
6 A (at 24 V, AC15)
6 A (at 120 V, AC15)
6 A (at 250 V, AC15)
Motor load according to UL 508 1/2 HP, 120 V AC (normally open contact)
1 HP, 250 V AC (NO contact)
Connection: Welding
Environmental conditions
Protection class RT II
Ambient temperature (operating) -40 °C ... 85 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Altitude ≤ 2000 m
Mounting Type: Plug-in installation
Assembly Instructions Gap-free arrangement (> 70 °C ≥ 2.5 mm)
Installation Position Any
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix single relay REL-MR- 24DC/1IC - 2961341 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance, and give you a surprise.
|
More on that
|
Phoenix/Phoenix Single Relay REL-MR-BL- 24AC/21-21 - 1109546
Pluggable miniature power relay in basic design with power contacts, 2 changeover contacts, input voltage 24 V AC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 5x106 switching cycles
Insulation characteristics
Overvoltage category III
Pollution level 3 ...
|
|
Relay module with manually operated locking - PLC-RPT- 24DC/ 1AU/MS/SEN - 2909678
The PLC-INTERFACE is suitable for input functions, including the PLC-BPT.../SEN base terminal with plug-in connection with plug-in miniature multi-layer gold-plated contact relays, manual operation, 1 normally open contact, 24 V DC input voltage
size
Width 6.2 mm
Height 80 mm
Depth...
|
|
Phoenix/Phoenix Single Relay REL-IR-BL/L-115AC/4X21 - 1109564
Plug-in industrial relay, basic design, with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, input voltage: 115 V AC
Service life, electrical aspects See graph
Test voltage 2.5 kVrms (50 Hz, 1 minute, line ...
|
|
RIF-2-RSC-LV-120AC/4X21/EX-2909846 relay module from Phoenix
Prefabricated relay modules include: relay base, plug-in function module, power contact relay and bracket, certified according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Zone 2, Screw connection, 4 PDTs, varistor, input voltage: 120 V AC
Forehead...
|
|
Phoenix/Phoenix relay modules RIF-RPT-LDP-24DC/2X2/2X1/AU/FG - 1148699
Relay modules with plug-in connection, including: relay base and status LEDs, freewheeling diodes and clamps, safety relay with mechanically interlocking contacts (acc. to DIN EN 61810-3), contact type: 2 NO and 2 NC, input voltage: 24 V DC ...
|
|
RIF-2-RSC-LV-120AC/4X21 relay module from Phoenix/Phoenix - 2903317
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 4 changeover contacts. Input voltage: 120 V AC
The maximum power consumption under rated conditions is 1.56 W
Test voltage ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 5DC/1/SSI - 1094759
PLC-INTERFACE, CONSISTING OF BASE TERMINALS WITH SCREW CONNECTION AND "HOT" PLUGGING MINIATURE RELAYS AS WELL AS INTERNAL AMPLIFIER CIRCUITRY AND A SUITABLE AUXILIARY POWER SUPPLY FOR WEAK SIGNAL SOURCES, 1 NO NO U, 5 V DC RATED INPUT VOLTAGE
The maximum power consumption under the rated condition is 0.22 W
Power supply...
|
|
Relay module with manually operated locking - PLC-RSC-120UC/21-21AU/MS - 2910511
PLC-INTERFACE, including relay base and pluggable multilayer gold contact relay with manual operation and integrated status LED, screw connection, 2 changeover contacts, input voltage: 120 V AC / 110 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/ 1/ACT - 2900312
The PLC-INTERFACE is suitable for output functions, including PLC-BPT.../ACT base terminals with plug-in connection with plug-in miniature power contact relay for mounting on DIN rail NS 35/7.5, 1 NO contact, input voltage 24 V DC
advantage
Directly connected to the following ...
|
|
REL-MR-12DC/21-21/C1D2 - 2906988
Plug-in miniature power relay, RT III hermetically sealed, with power contacts, 2 changeover contacts, input voltage: 12 V DC, in combination with the corresponding PLC base, is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Zone I, Class 2.
Coil side
Rated input voltage U ...
|
|
PLC-RSC-230UC/21HC/EX - 2909521
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. It has been approved according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
REL-IR4/24DC/4X21/EX - Phoenix/Single Relays - 2909738
Pluggable industrial relay, RT III sealed, with power contacts, 4 changeover contacts, mechanical switch position indicator, polarity: non-polarized, input voltage: 24 V DC, combined with RIF-2.../EX base, according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
Phoenix/Phoenix relay module PLC-RPT-230AC/21-21/SO46/HI - 1079389
The PLC-INTERFACE consists of PLC-BSC.../21-21/SO46/HI base terminals with plug-in interface and Push-in miniature relay with power contacts, 2 changeover contacts, rated input voltage 230 V AC, and defined activation and deactivation thresholds
Maximum power consumption under rated conditions ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 72UC/21-21/RW- 2900347
PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature power contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 2 PDTs, input voltage 72 V DC
advantage
...
|
|
Relay module with manually operated locking - PLC-RPT-120UC/21-21/MS - 2910522
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation and integrated status LED, Push-in connection, 2 changeover contacts, input voltage: 120 V AC / 110 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Phoenix/Phoenix Single Relay - REL-MR- 12DC/21HC AU 2961532
Pluggable miniature power relay with multi-layer gold-plated contacts for high continuous current, 1 PDT, input voltage 12 V DC
advantage
RT III certified (wash-resistant)
Switching current up to 16 A
Coil side
Rated input voltage UN 12 V DC
Input voltage range 7.8 ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR - 24AC/21HC/MS - 2987891
Plug-in miniature relay with power contact, 1 PDT, test key, mechanical switch position display, status LED, input voltage 24 V AC
advantage
The strap can detect manual operation
Switching current up to 16 A
Integrated status LEDs
Mechanical switch position display
...
|
|
Phoenix/Phoenix Single Relay REL-MR- 24DC/21-21AU - 2961215
Pluggable miniature power relay with multi-layer gold-plated contacts, 2 PDTs, input voltage 24 V DC
Advantages RT III certified (wash-resistant)
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 3x 107 switching cycles
Insulation characteristics
Overvoltage Category I ...
|
|
Phoenix/Phoenix Single Relay REL-PR-BL-110DC/4X21 - 1157976
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 switching cycles
Test voltage Winding/contact 2 kVrms ...
|
|
Phoenix/Phoenix relay module PLC-RSC-120UC/ 1AU/MS/SEN-2909664
The PLC-INTERFACE is suitable for input functions, including the PLC-BSC.../SEN base terminals, screw connection, plug-in miniature relays with multi-layer gold-plated contacts and manual operation, 1 normally open contact, 120 V AC/110 V DC input voltage
Rated ...
|
|
Contact
working hours
