Pluggable miniature power relay with multi-layer gold-plated contacts, 2 PDTs, input voltage 24 V DC
Advantages RT III certified (wash-resistant)
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 3x 107 switching cycles
Insulation characteristics
Overvoltage category III
Pollution level 3
Insulation Foundation isolation
Service life, electrical aspects See graph
The maximum power consumption under rated conditions is 0.41 W
Test voltage 5 kV AC (50 Hz, 1 minute, coil/contact)
Test voltage Contact/Contact 2.5 kV AC (50 Hz, 1 minute, contact/contact)
Coil side
Rated input voltage UN 24 V DC
Input voltage range 15.6 V DC ... 59.52 V DC
Typical input current at UN is 17 mA
Typical response time is 7 ms
Typical release time is 3 ms
Coil resistance 1440 Ω ±10 % (at 20 °C)
handoff
Contact Type: 2 changeover contacts
Switch contact type Single contact
Drive and function monostability
Contact material AgNi, hard gold plating
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 100 mV at 10 mA
Limit continuous current to 50 mA
The maximum starting current is 50 mA
Minimum switching current 1 mA (24 V)
Maximum power rating (resistive load) 1.2 W (24 V DC)
Switching: When the gold plating is broken
Precautions If the plating is damaged, the following values can be applied
Contact material AgNi
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V at 10 mA
Limit continuous current to 8 A
Maximum start-up current 15 A (300 ms)
Minimum switching current 10 mA (5 V)
Maximum power rating (resistive load) 190 W (24 V DC)
85 W (for 48 V DC)
60 W (can be used for 60 V DC)
44 W (for 110 V DC)
60 W (for 220 V DC)
2000 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.2 A (at 110 V, 13 DCs)
0.2 A at 250 V, 13 DCs
2 A (at 24 V, AC15)
2 A (at 120 V, AC15)
2 A (at 250 V, AC15)
Connection: Welding
Assembly Instructions Gap-free arrangement (> 70 °C ≥ 2.5 mm)
Installation Position Any
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix single relay REL-MR- 24DC/21-21AU - 2961215 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 24AC/21-21/MS - 2987956
Pluggable miniature relay with power contacts, 2 PDTs, test keys, mechanical switch position display, status LED, input voltage 24 V AC
advantage
The strap can detect manual operation
Switching current up to 16 A
DC model with freewheeling diode
Integrated status LEDs
Mechanical switches ...
|
|
Phoenix/Phoenix single relay REL-IR-BL/L- 12DC/4X21 - 1109557
Plug-in industrial relay, basic design, with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, polarity A1+, A2-, input voltage: 12 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 3 ...
|
|
Phoenix/Phoenix Single Relay REL-PR-BL-110DC/4X21 - 1157976
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 switching cycles
Test voltage Winding/contact 2 kVrms ...
|
|
Phoenix/Phoenix relay module PLC-RPT-24DC/21HC/EX - 2909532
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with plug-in interface and plug-in relay with 10 A power contact, 1 changeover contact, 24 V DC input voltage. It is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2. ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-OR2/L- 24AC/2X21 - 2903690
Pluggable octal relay with power contacts, 2PDT, test button, mechanical switch position display, coil voltage 24V AC
size
Width 35 mm
Height 35 mm
Depth 54.4 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 55 °C
Ambient temperature ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 12DC/21-21 - 2900329
The PLC-INTERFACE, consisting of the Push-in base terminal block PLC-BPT.../21-21 and a plug-in miniature relay with power contacts, can be mounted on a DIN rail type NS 35/7.5, 2 PDTs, input voltage 12 V DC
advantage
Low-profile design
Efficient system with V8 adapter ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-BL-200AC/21HC/MS - 2908178
Plug-in miniature relay with power contact, 1 changeover contact, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 200 V AC
size
Width 13 mm
Height 29 mm
Depth 25.5 mm
Environmental conditions
Ambient temperature (operating) -40 ...
|
|
Phoenix/Phoenix relay modules EMG 10-REL/KSR-G 24/ 1-LCU 2942807
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large loads, 1 normally open contact, input voltage 24 V DC, rotation 180°
Advantages: Integrated input module and interference suppression module
Maximum power consumption of 0.5 W under rated conditions
Test voltage ...
|
|
Phoenix/Phoenix single relay REL-MR- 4,5DC/21 - 2961367
Plug-in miniature power relay with power contacts, 1 PDT, input voltage 4.5 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
Product Category ...
|
|
Phoenix/Phoenix Single Relay - REL-MR-BL-115AC/21-21 1109569
Pluggable miniature power relay, basic design, with power contacts, 2 changeover contacts, input voltage 115 V AC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 5x106 switching cycles
Insulation characteristics
Overvoltage category III
Pollution level ...
|
|
Phoenix/Phoenix relay module - RIF-4-RPT-LDP-24DC/3X21 2903278
Pre-assembled relay modules with plug-in connections, including: relay base, high-power contact relay and bracket. Contact type: 3 PDT. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input voltage range 20.4 V DC ... 26.4 V DC ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/21HC/RW - 2900324
The PLC-INTERFACE is suitable for rail applications and high continuous currents, including base terminals with plug-in connection and plug-in miniature relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 1 PDT, input voltage 24 V DC
Advantage...
|
|
Phoenix/Phoenix single relay REL-IR-BL/L- 24DC/4X21 - 1032527
Plug-in industrial relay with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, input voltage: 24 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 3x 107 switching cycles
Insulation characteristics
...
|
|
REL-MR-120AC/21HC - 2961419 single relay from Phoenix
Plug-in miniature power relay with power contacts for high continuous current, 1 PDT, input voltage 120 V AC
Advantage: Switching current up to 16 A
Coil side
Rated input voltage UN 120 V AC
Input voltage range 93.6 V AC ... 186 V AC
...
|
|
RIF-1-RSC-LDP-24DC/1X21 relay module from Phoenix - 2903358
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 1 changeover contact. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24UC/21AU - 2966278
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 1 PDT, input voltage 24 V AC/DC
The maximum power consumption under rated conditions is 0.26 W
Test...
|
|
Phoenix/Phoenix relay module PLC-RSC-12DC/ 1IC/ACT -1078800
The PLC-INTERFACE is suitable for high inrush currents and consists of PLC-BSC.../1 IC/ACT base terminal with plug-in connection with plug-in miniature relay for mounting on DIN rail NS 35/7.5 with an inrush current of up to 130 A, 1 NO contact, input voltage 12 V DC
...
|
|
Phoenix/Phoenix relay module RIF-1-RPT-LV-120AC/2X21AU - 2903328
Pre-assembled relay modules with plug-in connections, including: relay bases, multi-layer contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 120 V AC
Maximum power consumption under rated conditions is 0.96 W
Test voltage (coil/contact ...
|
|
Phoenix/Phoenix Single Relay REL-PR3-48DC/3X21 - 2908894
Plug-in high-power relay with power contacts, 3 N/O contacts, coil voltage: 48 V DC
Coil side
Rated input voltage UN 48 V DC
Input voltage range 40.8 V DC ... 52.8 V DC (20 °C)
Typical input current at UN is 28 mA
UN's input power consumption ...
|
|
Phoenix/Phoenix relay module PLC-RPT-120UC/ 1AU/SEN - 2900314
The PLC-INTERFACE is suitable for input functions, including the PLC-BPT.../SEN base terminals with plug-in connection with plug-in miniature multi-layer gold-plated contact relays for mounting on the DIN rail NS 35/7.5, 1 normally open contact, input voltage 120 V AC/110 V DC
advantage
...
|
|
Contact
working hours
