The PLC-INTERFACE is suitable for input functions, including the PLC-BPT.../SEN base terminal with plug-in connection with plug-in miniature multi-layer gold-plated contact relays, manual operation, 1 normally open contact, 24 V DC input voltage
size
Width 6.2 mm
Height 80 mm
Depth 94 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 60 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Protection class RT II (relay)
IP20 (Relay Base)
Coil side
Rated input voltage UN 24 V DC
Typical input current at UN is 9 mA
Typical response time is 5 ms
Typical release time is 8 ms
Protection Circuits Polarity Protection Polarity Protection Diodes
Standby diode Damping diode
The operating voltage is displayed with a yellow LED
Power consumption at rated conditions is 0.22 W
Contact side
Contact Type: 1 N/O contact
Switch contact type Single contact
Contact material AgSnO, hard gold plating
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 100 mV at 10 mA
Minimum switching current 1 mA (24 V)
The maximum starting current is 50 mA
Limit continuous current to 50 mA
Maximum power rating (resistive load) 1.2 W (24 V DC)
Contact surface (with destructible gold plating)
Precautions If the plating is damaged, the following values can be applied
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 100 mA)
Limit continuous current to 6 A
Minimum switching current 10 mA at 12 V
Maximum power rating (resistive load) 140 W (24 V DC)
20 W (for 48 V DC)
18 W (can be used for 60 V DC)
23 W (for 110 V DC)
40 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.2 A (at 110 V, 13 DCs)
0.1 A (at 220 V, 13 DCs)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)
overview
Test voltage 4 kV AC (50 Hz, 1 minute, coil/contact)
Mode of operation 100% working factor
Flammability rating according to UL 94 V0 (enclosure)
Mechanical life 1x 107 cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection Name Coil Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Connect to data2
Connection Name Contact Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Standards and Specifications
Name Standards/Regulations
Standard/Procedure IEC 60664
IEC 60664A
DIN VDE 0110
DIN EN 50178/VDE 0160 (relevant part)
DIN EN 50178/VDE 0160
IEC 60255/DIN VDE 0435 (relevant parts)
Pollution level 3
Overvoltage category III
Conformity CE compliant
Conformance/Certification
Name CE
Certificate CE compliant
Name Corrosive Gas Testing
Identifire: ISA-S71.04. G3 Harsh Group
EN 60068-2-60
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix relay module with manual operation locking function - PLC-RPT- 24DC/ 1AU/MS/SEN - 2909678 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance, and give you a surprise.
|
More on that
|
Phoenix/Phoenix Single Relay REL-MR- 12DC/1ICT - 1081616
Pluggable miniature power relay with tungsten front contacts for high impulse currents up to 800 A peak, 1 normally open contact, input voltage: 12 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection can be achieved up to RT I...
|
|
RIF-2-RSC-LDP-125DC/2X21 relay module from Phoenix/Phoenix - 2903324
Prefabricated relay modules with screw connections, including: relay bases, high-power contact relays and brackets. Contact type: 2 changeover contacts. Input voltage: 125 V DC
The maximum power consumption under rated conditions is 0.94 W
Test voltage (coil/contact) 2.5 kVrms ...
|
|
RIF-0-RSC-24DC/21 relay module from Phoenix/Phoenix - 2903374
Prefabricated relay modules with screw connections, including relay bases with ejection devices and high-power contact relays. Contact type: 1 changeover contact. Input voltage: 24 V DC
The maximum power consumption under the rated condition is 0.22 W
Test voltage coil/contact 4 kVrms ...
|
|
Phoenix/Phoenix relay module PLC-RSC-120UC/21HC/EX - 2909520
PLC-INTERFACE, consisting of DIN rail mountable, 14 mm base terminal with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 120 V AC/110 V DC input voltage. It has been approved according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/ 1IC/ACT - 2900298
The PLC-INTERFACE is suitable for high inrush currents and consists of PLC-BPT.../1 IC/ACT base terminal with plug-in connection with plug-in miniature relay for mounting on DIN rail NS 35/7.5 with an inrush current of up to 130 A, 1 NO contact, input voltage 24 V DC
...
|
|
Relay module with manually operated locking - PLC-RPT-120UC/21/MS - 2909669
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal, plug-in connection, with plug-in miniature relay with power contacts and manual operation, 1 changeover contact, 120 V AC/110 V DC input voltage
advantage
Low-profile design
Implemented via V8 adapter with ...
|
|
Phoenix/Phoenix relay module EMG 10-REL/KSR-G 24/21-LC AU - 2940090
Relay module with solid-state miniature electromagnetic relay, gold-plated contacts for small loads, 1PDT, input voltage 24 V DC
Advantages: Integrated input module and interference suppression module
Maximum power consumption of 0.5 W under rated conditions
Test voltage Coil/contact 4 kV AC (50 h ...
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/21-21 - 2900336
The PLC-INTERFACE, consisting of the Push-in base terminal block PLC-BPT.../21-21 and the plug-in miniature relay with power contacts, can be mounted on a DIN rail type NS 35/7.5, 2 PDTs, input voltage 230 V AC/DC
advantage
Low-profile design
Effective ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24UC/2X21/FG - 2910536
PLC-INTERFACE, incl. relay base and plug-in safety relay with positive guide contacts in accordance with DIN EN 61810-3, Screw connection, 2 changeover contacts, forced actuation, bridge rectifier, input voltage: 24 V AC/DC
Maximum work under rated conditions ...
|
|
RIF-2-RSC-LV-24AC/4X21 relay module from Phoenix/Phoenix - 2903318
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 4 changeover contacts. Input voltage: 24 V AC
The maximum power consumption under rated conditions is 1.58 W
Test voltage ...
|
|
Relay module with manually operated locking - PLC-RPT- 24DC/21-21AU/MS - 2910524
PLC-INTERFACE, including relay base and pluggable multi-layer gold contact relay with manual operation, integrated status LEDs and freewheeling diode, Push-in connection, 2 changeover contacts, input voltage: 24 V DC
size
Width 14 mm
Height 80 mm
Depth 104 ...
|
|
Relay module with manually operated locking - PLC-RSC- 24UC/21-21/MS - 2910503
PLC-INTERFACE, including relay base and pluggable power contact relay (with manual operation and integrated status LED), screw connection, 2 changeover contacts, input voltage: 24 V AC/DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental conditions
...
|
|
Phoenix/Phoenix relay module RIF-1-RPT-LV-230AC/2X21AU - 2903327
Pre-assembled relay modules with plug-in connections, including: relay bases, multi-layer contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 230 V AC
Test voltage coil/contact 2.5 kVrms (50 Hz, 1 minute, line ...
|
|
Phoenix/Phoenix relay modules - PLC-RSC- 24DC/ 1AU/MS/SEN - 2909663
The PLC-INTERFACE is suitable for input functions, including the PLC-BSC.../SEN base terminals, screw connection, plug-in miniature relay with multi-layer gold-plated contacts and manual operation, 1 NO contact, 24 V DC input voltage
size
Width 6.2 ...
|
|
RIF-1-RPT-LV-230AC/2X21 relay module from Phoenix/Phoenix - 2903331
Pre-assembled relay modules with plug-in connections, including: relay bases, high-power contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 230 V AC
Coil side
Rated input voltage UN 230 V AC
Input...
|
|
Phoenix/Phoenix relay module EMG 22-REL/KSR- 24/21AU -2947721
Relay module with solid-state miniature electromagnetic relay, contacts (AgNi+Au): small to large loads, 1PDT, input voltage 24VAC/DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Integrated input module and interference suppression module
Rated ...
|
|
Phoenix/Phoenix relay modules PLC-RSC-230AC/21HC/SO46/HI-1079402
The PLC-INTERFACE consists of PLC-BSC.../21HC/SO46/HI base terminals with screw connection and Push-in miniature relays for high continuous currents, 1 changeover contact, rated input voltage of 230 V AC, defined activation and deactivation thresholds
The most ...
|
|
Phoenix/Phoenix Time Relays Timing Relays - ETD-BL-1T-230-PT - 2905814
Compact multi-function time relay with 4 functions, adjustable time range (50 ms - 1 h), Push-in connection, 1 PDT
Product Description:
Increasing demands are placed on safety and system reliability in all areas. Mechanical engineering, chemical industry, power plants and ...
|
|
Phoenix/Phoenix relay module PLC-RPT-120UC/21-21/SO46 - 1136244
The use of a PLC-INTERFACE prevents interference currents or voltages on the control side. Includes base terminal with plug-in connection, with "hot" plug-in miniature relay with up to 2x 8 A power contacts, 2 changeover contacts, 120 V AC input voltage
Test voltage (coil/contact ...
|
|
Phoenix/Phoenix relay module PLC-RSC-120UC/21/EX - 2909525
PLC-INTERFACE, consisting of DIN-rail mountable, 6.2 mm base terminal with screw connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 120 V AC/110 V DC input voltage. It has been approved according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 requirements.
|
|
Contact
working hours
