PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation and integrated status LED, Push-in connection, 2 changeover contacts, input voltage: 120 V AC / 110 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental conditions
Ambient temperature (operating) -20 °C ... 55 °C
Ambient temperature (storage / transport) -20 °C ... 85 °C
Maximum height ≤ 2000 m
Protection class RT II (relay)
IP20 (Relay Base)
≥ IP54 (mounting position)
Coil side
Rated input voltage UN 120 V AC
110 V DC
Typical input current at UN is 5 mA
Typical response time 6 ms (110 V DC)
3 ms … 15 ms (120 V AC)
Typical release time 10 ms (110 V DC)
Typical release time range 3 ms ... 15 ms (120 V AC)
Protection circuit Bridge rectifier Bridge rectifier
The operating voltage is displayed with a yellow LED
Contact side
Contact Type: 2 changeover contacts
Switch contact type Single contact
Contact material AgNi
Maximum switching voltage 250 V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250 V (L1, L2, L3), a bulkhead PLC-ATP must be used. FBST 8-PLC… Or... FBST 500… for equipotential bridging)
Minimum switching voltage 12 V (10 mA)
Minimum switching current 10 mA (12V)
Maximum start-up current 12 A (20 ms)
Limit continuous current to 6 A
Maximum power rating (resistive load) 192 W (24 V DC)
62 W (48 V DC)
42 W (60 V DC)
55 W (110 V DC)
66 W (220 V DC)
2000 VA (250 V AC)
Switching capacity 1 A (24 V, DC13)
1.5 A (230 V, AC15)
overview
Test voltage 4 kVrms (50 Hz, 1 minute, coil/contact)
2.5 kVrms (50 Hz, 1 minute, CO contact/CO contact)
Mode of operation 100% working factor
Flammability rating according to UL 94 V0 (enclosure)
Mechanical life 5x106 switching cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection Name Coil Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Connect to data2
Connection Name Contact Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Standards and Specifications
Name Standards/Regulations
Standard/Procedure EN 50178
Rated insulation voltage 250 V AC
Rated overvoltage 6 kV
Insulation: Safety isolation, reinforced insulation
Pollution class 2
Overvoltage category III
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the relay module with manual operation locking function of the Germany brand Phoenix - PLC-RPT-120UC/21-21/MS - 2910522 products, the purpose of 76 Technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix relay module PLC-RPT- 48DC/21HC - 2900294
The PLC-INTERFACE is suitable for high continuous currents and consists of PLC-BPT.../21 HC base terminals with plug-in connection with plug-in miniature relays for mounting on the DIN rail NS 35/7.5 with a maximum continuous current of up to 10 A, 1 PDT, and an input voltage of 48 V DC
advantage
...
|
|
Phoenix/Phoenix Single relay with manually operated locking function - REL-IR2/LDP- 60DC/2X21 - 2903662
Plug-in industrial relay with power contacts, 2 PDTs, test key, status LED, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 60 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ring...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/100AC/4X21 - 2907055
Plug-in industrial relay with power contacts, 4 changeover contacts, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 100 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) ...
|
|
REL-MR-12DC/21-21/C1D2 - 2906988
Plug-in miniature power relay, RT III hermetically sealed, with power contacts, 2 changeover contacts, input voltage: 12 V DC, in combination with the corresponding PLC base, is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Zone I, Class 2.
Coil side
Rated input voltage U ...
|
|
RIF-1-RPT-LDP-24DC/2X21AU - 2903330
Pre-assembled relay modules with plug-in connections, including: relay bases, multi-layer contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 24 V DC
changeover contacts
Switch contact type Single contact
Drive & Function Monostable ...
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/21HC/EX - 2909534
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with plug-in interface and plug-in relay with 10 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/LDP- 12DC/4X21 - 2903676
Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 12 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
...
|
|
Phoenix/Phoenix relay module RIF-0-RPT-24DC/ 1 - 2903361
Pre-assembled relay modules with plug-in connections, including: relay base (with pop-up) and high-power contact relays. Contact type: 1 NO contact. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input voltage range 19.2 V DC ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24DC/ 1AU/SEN - 2966317
The PLC-INTERFACE is suitable for input functions, including PLC-BSC.../SEN base terminals with screw connection with plug-in miniature multilayer gold-plated contact relays for mounting on DIN rail NS 35/7.5, 1 NO contact, input voltage 24 V DC
advantage
Maximum savings of 60 ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/L- 24AC/4X21AU - 2903683
Plug-in industrial relay with power contacts and additional contacts plated with hard gold, 4 PDT, test button, status indication LED, mechanical switch setting display, coil voltage: 24 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Environment...
|
|
Phoenix/Phoenix relay modules EMG 10-REL/KSR-120/ 1-LC -2964432
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large loads, 1 NO contact, input voltage 120 V AC/DC
Advantages: Integrated input module and interference suppression module
The maximum power consumption under rated conditions is 0.6 W
Test voltage (coil ...
|
|
Relay module with manually operated locking - PLC-RSC-120UC/21AU/MS - 2909657
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, plug-in miniature relay with multi-layer gold-plated contacts and manual operation, 1 changeover contact, 120 V AC/110 V DC input voltage
size
Width 6.2 mm
Height 80 m ...
|
|
Phoenix/Phoenix relay module EMG 45-REL/IR-W230/HWR - 2952185
Relay module with solid state industrial relay, contacts: 2PDT, multi-fault alarm input, input diode P-pole interconnection (6 x 1N4007 diodes), coil and capacitor in parallel, with multi-input indicator, input voltage 230V AC
Maximum power consumption under rated conditions is 3.68 W
Test Electricity ...
|
|
REL-MR- 24AC/21-21 - 2961435 single relay
Plug-in miniature power relay with power contacts, 2 PDTs, input voltage 24 V AC
advantage
RT III certified (wash-resistant)
Switching current up to 8 A
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 1x 107 cycles
Insulation ...
|
|
Phoenix/Phoenix Single Relay REL-IR-BL/L- 24AC/4X21 - 1109563
Plug-in industrial relay, basic design, with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, input voltage: 24 V AC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 2x 107 switching cycles ...
|
|
REL-PR3-120AC/3X1 2903708 single relay from Phoenix
Plug-in high-power relay with power contacts, 3 N/O contacts, coil voltage: 120 V AC
Coil side
Rated input voltage UN 120 V AC
Input voltage range 102 V AC ... 132 V AC (20 °C)
Trunk frequency 50/60 Hz
Typical input current at UN ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/21/RW 2900318
PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature power contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 1 PDT, input voltage 24 V DC
advantage
...
|
|
Phoenix/Phoenix Single Relay REL-MR-110DC/21-21/EX - 2908824
Plug-in miniature power relay, sealed version RT III, with power contacts, 2 changeover contacts, input voltage: 110 V DC, in combination with the corresponding PLC base, certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Zone I, Class 2.
Advantages: Cutting up to 8 A ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/2X21/FG-2910539
PLC-INTERFACE, including relay base and plug-in safety relay, with positively guided contacts according to DIN EN 61810-3, Push-in connection, 2 changeover contacts, forced actuation, bridge rectifier, input voltage: 24 V AC/DC
Maximum ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 72UC/21-21/RW- 2900347
PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature power contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 2 PDTs, input voltage 72 V DC
advantage
...
|
|