Plug-in industrial relay, basic design, with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, input voltage: 24 V AC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 2x 107 switching cycles
Insulation characteristics
Overvoltage category III
Pollution class 2
Insulation Foundation isolation
Service life, electrical aspects See graph
Test voltage 2.5 kVrms (50 Hz, 1 minute, coil/contact)
Test Voltage CO Contact/CO Contact 2 kVrms (50 Hz, 1 min, CO Contact/CO Contact)
Rated insulation voltage 250 V AC
Rated overvoltage 5 kV
Coil side
Rated input voltage UN 24 V AC
Input voltage range 19.2 V AC ... 39.6 V AC (20 °C)
Trunk frequency 50/60 Hz
Typical input current at UN 45 mA at 50 Hz
Typical response time 5 ms ... 15 ms
Typical release time range 5 ms ... 20 ms
Coil voltage 24 V AC
The status display LED is yellow
Coil resistance 192 Ω ±10 %
handoff
Contact Type: 4 PDT
Switch contact type Single contact
Drive and function monostability
Contact material AgNi
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 12 V (10 mA)
Limit continuous current to 6 A
Maximum start-up current 12 A (20 ms, NO-contact)
Minimum switching current 10 mA (12V)
Maximum power rating (resistive load) 144 W (24 V DC)
130 W (48 V DC)
90 W (60 V DC)
66 W (110 V DC)
88 W (220 V DC)
1500 VA (250 V AC)
Minimum on-off capacity 120 mW
Width 22.5 mm
Height 28 mm
Depth 35.5 mm
Environmental conditions
Protection class RT II
≥ IP54 (mounting position)
Ambient temperature (operating) -40 °C ... 70 °C
Ambient temperature (storage / transport) -40 °C ... 70 °C
Altitude ≤ 2000 m
Assembly Instructions Arrangement without spacing
Installation Position Any
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix single relay REL-IR-BL/L- 24AC/4X21 - 1109563 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance, and give you a surprise.
|
More on that
|
Phoenix/Phoenix relay module PLC-RSC-24DC/21HC/EX - 2909519
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 24 V DC input voltage. It is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2.
...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR - 24DC/21 - 2961105
Plug-in miniature power relay with power contacts, 1 PDT, input voltage 24 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
size
...
|
|
Relay module with manually operated locking - PLC-RPT-230UC/21-21AU/MS - 2910529
PLC-INTERFACE, including relay base and pluggable multi-layer gold contact relay with manual operation and integrated status LED, Push-in connection, 2 changeover contacts, input voltage: 230 V AC / 220 V DC
size
Width 14 mm
Height 80 mm
Depth 104 ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/21AU/MS - 2909673
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal, plug-in connection, with manually operated plug-in miniature relay with multi-layer gold-plated contacts, 1 changeover contact, 24 V AC/DC input voltage
The maximum power consumption under rated conditions is 0.26 W
Test voltage ...
|
|
RIF-2-RSC-LDP-24DC/2X21 relay module from Phoenix - 2903326
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, and brackets. Contact type: 2 changeover contacts. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input voltage range 19.2 V DC ... 30 V D ...
|
|
Phoenix/Phoenix relay module DEK-REL- 24/1/SEN - 2964050
Relay module for sensors with solid state miniature relays, contacts (AgNi+Au): Small to medium loads, 1 normally open contact, input voltage 24V AC/DC, mountable on NS 35/7.5, module thickness 6.2 mm
advantage
Reduced costs due to the elimination of N-terminals
Most...
|
|
REL-MR- 60DC/21HC - 2961325 single relay from Phoenix
Plug-in miniature power relay with power contacts for high continuous current, 1 PDT, 60 V DC
advantage
Switching current up to 16 A
Coil side
Rated input voltage UN 60 V DC
Input voltage range 39 V DC ... 144 V DC
Typical input under UN ...
|
|
Phoenix/Phoenix relay module RIF-0-RPT-12DC/21AU - 2903369
Pre-assembled relay modules with plug-in connections, including: relay base (with ejector) and multi-layer gold-plated contact relays. Contact type: 1 PDT. Input voltage: 12 V DC
Maximum power consumption of 0.19 W under rated conditions
Test voltage (coil/contact) 4 kVrms ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/L-120AC/4X21AU - 2903684
Plug-in industrial relay with power contacts and additional contacts plated with hard gold, 4 PDT, test button, status indication LED, mechanical switch setting display, coil voltage: 120 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Environment...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24DC/21-21/EX - 2909509
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with screw connection and plug-in relay with power contacts, 2 changeover contacts, 24 V DC input voltage. It is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2.
Rated...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/21AU - 2900306
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal with plug-in connection with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 1 PDT, input voltage 24 V DC
advantage
Low-profile design
Implemented via V8 adapter with ...
|
|
Relay module with manually operated locking - RIF-1-RSC-LV-120AC/1X21MS - 2909774
Prefabricated relay modules with screw connections, including: relay bases, relay holders, plug-in interference suppression modules, and power contact relays with test buttons and built-in status LEDs. Contact type: 1 changeover contact. Input voltage: 120 V AC
RIFLINE END ...
|
|
Phoenix Single Relay REL-MR-BL-110DC/21HC - 1109539
Pluggable miniature power relay, basic design, with power contacts, for high continuous currents, 1 changeover contact, input voltage 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 1x 107 cycles
Insulation characteristics
Overvoltage Category ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/LDP-125DC/4X21 - 2903681
Plug-in industrial relay with power contacts, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2–, coil voltage: 125 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
...
|
|
Phoenix/Phoenix relay module RIF-0-RPT-12DC/ 1AU - 2903360
Pre-assembled relay modules with plug-in connections, including: relay base (with ejector) and multi-layer gold-plated contact relays. Contact type: 1 NO contact. Input voltage: 12 V DC
Maximum power consumption of 0.19 W under rated conditions
Test voltage (coil/contact) 4 k ...
|
|
Phoenix/Phoenix relay module - PLC-RPT- 24DC/ 1AU/SEN 2900313
The PLC-INTERFACE is suitable for input functions, including the PLC-BPT.../SEN base terminal with plug-in connection with plug-in miniature multilayer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 1 normally open contact, input voltage 24 V DC
advantage
No additional ...
|
|
Phoenix/Phoenix relay module EMG 10-REL/KSR-G 24/21-LC AU - 2940090
Relay module with solid-state miniature electromagnetic relay, gold-plated contacts for small loads, 1PDT, input voltage 24 V DC
Advantages: Integrated input module and interference suppression module
Maximum power consumption of 0.5 W under rated conditions
Test voltage Coil/contact 4 kV AC (50 h ...
|
|
Phoenix/Phoenix single relay with manually operated locking function - REL-OR3/L-120AC/3X21 - 2903695
Pluggable octal relay with power contacts, 3PDT, test button, mechanical switch position display, coil voltage 120V AC
size
Width 35 mm
Height 35 mm
Depth 54.4 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 55 °C
Environment...
|
|
Phoenix/Phoenix relay module PLC-RSC-230UC/21 - 2966207
The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and plug-in miniature relays with multi-level contacts, can be mounted on NS 35/7.5 rails, 1PDT, input voltage 230V AC/220V DC
advantage
Low-profile design
Implemented via V8 adapter ...
|
|
Phoenix/Phoenix relay modules EMG 10-REL/KSR-230/21-LC - 296438
Relay module with solid state miniature electromagnetic relay, contact (AgNi): medium to large load, 1PDT, input voltage 230 V AC/DC
The maximum power consumption under the rated condition is 1.15 W
Test voltage (coil/contact) 4 kV AC (50 Hz, 1 minute, coil/contact) ...
|
|
Contact
working hours
