PLC-INTERFACE, including relay base and pluggable multi-layer gold contact relay with manual operation and integrated status LED, Push-in connection, 2 changeover contacts, input voltage: 230 V AC / 220 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental conditions
Ambient temperature (operating) -20 °C ... 50 °C
Ambient temperature (storage / transport) -20 °C ... 85 °C
Maximum height ≤ 2000 m
Protection class RT II (relay)
IP20 (Relay Base)
≥ IP54 (mounting position)
Coil side
Rated input voltage UN 230 V AC
220 V DC
Typical input current at UN is 5 mA
Typical response time 6 ms (220 V DC)
3 ms … 15 ms （230 V AC）
Typical release time 10 ms (220 V DC)
Typical release time range 3 ms ... 15 ms （230 V AC）
Protection circuit Bridge rectifier Bridge rectifier
The operating voltage is displayed with a yellow LED
Contact side
Contact Type: 2 changeover contacts
Switch contact type Single contact
Contact material AgNi, hard gold plating
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 12 V (1 mA)
Minimum switching current 1 mA (12V)
The maximum starting current is 50 mA
Limit continuous current to 50 mA
Contact surface (with destructible gold plating)
Precautions If the plating is damaged, the following values can be applied
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 12 V (10 mA)
Limit continuous current to 6 A
Maximum start-up current 12 A (20 ms)
Minimum switching current 10 mA (12V)
Maximum power rating (resistive load) 192 W (24 V DC)
62 W （48 V DC）
42 W （60 V DC）
55 W （110 V DC）
66 W （220 V DC）
2000 VA （250 V AC）
Switching capacity 1 A (24 V, DC13)
1.5 A （230 V, AC15）
overview
Test voltage 4 kVrms (50 Hz, 1 minute, coil/contact)
2.5 kVrms (50 Hz, 1 minute, CO contact/CO contact)
Mode of operation 100% working factor
Flammability rating according to UL 94 V0 (enclosure)
Mechanical life 5x106 switching cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection Name Coil Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Connect to data2
Connection Name Contact Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Standards and Specifications
Name Standards/Regulations
Standard/Procedure EN 50178
Rated insulation voltage 250 V AC
Rated overvoltage 6 kV
Insulation: Safety isolation, reinforced insulation
Pollution class 2
Overvoltage category III
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix relay module with manual operation locking function - PLC-RPT-230UC/21-21AU/MS - 2910529 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix relay module PLC-RPT-230UC/ 1AU/SEN - 2900315
The PLC-INTERFACE is suitable for input functions, including PLC-BPT.../SEN base terminals with plug-in connection with plug-in miniature multi-layer gold-plated contact relays for mounting on DIN rail NS 35/7.5, 1 NO contact, input voltage 230 V AC/220 V DC
advantage
...
|
|
Phoenix/Phoenix Single Relay REL-PR-BL-110DC/4X21 - 1157976
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 switching cycles
Test voltage Winding/contact 2 kVrms ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 60DC/21-21AU - 2900341
PLC-INTERFACE, incl. PLC-BPT.../21-21 base terminal block with plug-in connection with plug-in miniature multilayer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 60 V DC
advantage
Low-profile design
Implemented via V8 adapter ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-230AC/21-21/MS - 2987972
Pluggable miniature relay with power contacts, 2 PDTs, test key, mechanical switch position display, status LED, coil voltage 230VAC
advantage
The strap can detect manual operation
DC model with freewheeling diode
Integrated status LEDs
The maximum switching current is 16A
Mechanical switch position ...
|
|
Phoenix/Phoenix Single Relay REL-IR-BL/L-110DC/4X21 - 1109560
Plug-in industrial relay, basic design, with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, polarity A1+, A2-, input voltage: 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life ...
|
|
RIF-0-RSC-24DC/21AU - 2903372
Prefabricated relay modules with screw connections, including: relay base with ejection device and multi-layer gold-plated contact relays. Contact type: 1 changeover contact. Input voltage: 24 V DC
The maximum power consumption under the rated condition is 0.22 W
Test voltage (coil/contact) 4 k ...
|
|
The PLC-RPT-230UC/21HC relay module from Phoenix 2900297
The PLC-INTERFACE is suitable for high continuous currents and includes the PLC-BPT.../21 HC base terminal with plug-in connection with plug-in miniature relay for mounting on the DIN rail NS 35/7.5 with a limit continuous current of up to 10 A, 1 PDT, and an input voltage of 230 V AC/DC
Excellent...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24UC/21 - 2966184
The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and the plug-in miniature relay with multi-level contacts, can be mounted on the NS 35/7.5 rail, 1PDT, input voltage 24V AC/DC
advantage
Low-profile design
Effective ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24UC/21-21 - 2967073
The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and plug-in miniature relays with multi-level contacts, can be mounted on NS 35/7.5 rails, 2PDT, input voltage 24V AC/DC
advantage
Low-profile design
Effective ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-BL-100AC/21HC/MS - 2908179
Plug-in miniature relay with power contact, 1 changeover contact, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 100 V AC
size
Width 13 mm
Height 29 mm
Depth 25.5 mm
Environmental conditions
Ambient temperature (operating) -40 ...
|
|
RIF-2-RSC-LDP-24DC/2X21 relay module from Phoenix - 2903326
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, and brackets. Contact type: 2 changeover contacts. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input voltage range 19.2 V DC ... 30 V D ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/21-21AU/RW - 2900349
PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature multi-layer gold-plated contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 2 PDTs, input voltage 24 V DC
Excellent...
|
|
Phoenix/Phoenix relay module RIF-0-RPT-24DC/21 - 2903370
Pre-assembled relay modules with plug-in connections, including: relay base (with pop-up) and high-power contact relays. Contact type: 1 PDT. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input voltage range 19.2 V DC ... 36 ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 60DC/21-21 - 2967293
The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and plug-in miniature relays with multi-level contacts, can be mounted on NS 35/7.5 rails, 2PDT, input voltage 60 V DC
advantage
Low-profile design
Efficient system with V8 adapter ...
|
|
Phoenix/Phoenix relay module RIF-0-RPT-24DC/ 1AU - 2903359
Pre-assembled relay modules with plug-in connections, including: relay base (with ejector) and multi-layer gold-plated contact relays. Contact type: 1 NO contact. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input voltage range 19.2 V DC ...
|
|
Relay module with manually operated locking - PLC-RPT- 24UC/21AU/MS - 2909673
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal, plug-in connection, with manually operated plug-in miniature relay with multi-layer gold-plated contacts, 1 changeover contact, 24 V AC/DC input voltage
size
Width 6.2 mm
Height 80 mm
Depth 9 ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/LDP- 48DC/4X21 - 2903678
Plug-in industrial relay with power contacts, 4 PDTs, test keys, status LED, freewheeling diode, mechanical switch position display, polarity: A1+, A2–, coil voltage: 48 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ring...
|
|
Phoenix/Phoenix relay modules PLC-RPT- 24UC/21AU/RW- 2900321
PLC-INTERFACE for rail applications, including base terminals, with PCB connectors and pluggable miniature multilayer gold-plated contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 1 PDT, input voltage 24 V DC
...
|
|
Relay module with manually operated locking - PLC-RSC- 12DC/21/MS - 2909648
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, plug-in miniature relay with power contacts and manual operation, 1 changeover contact, 12 V DC input voltage
Advantages Low profile design
Annotation Type: Operational considerations
Note...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/100AC/4X21 - 2907055
Plug-in industrial relay with power contacts, 4 changeover contacts, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 100 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) ...
|
|
Contact
working hours
