Plug-in industrial relay with power contacts and additional contacts plated with hard gold, 4 PDT, test button, status indication LED, mechanical switch setting display, coil voltage: 120 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 55 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Protection class RT I
Coil side
Rated input voltage UN 120 V AC
Trunk frequency 50/60 Hz
Typical input current at UN is 13 mA
Typical response time 5 ms ... 15 ms (phase dependent)
Typical release time range 5 ms ... 20 ms (phase dependent)
The status display LED is yellow
Power consumption at rated conditions is 1.56 W
Contact side
Contact Type: 4 PDT
Switch contact type Single contact
Contact material AgNi, hard gold plating
Precautions When the given limit values are exceeded, the gold plating layer is destroyed. If it continues to be used, the maximum value of the high-power relay applies. Compared to using the power contact alone, the service life is reduced.
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 2 V (at 24 mA)
Minimum switching current 2 mA (24 V DC)
The maximum starting current is 50 mA
Limit continuous current to 50 mA
Maximum power rating (resistive load) 1.2 W (24 V DC)
The minimum on-off capacity is 48 mW
Contact surface (with destructible gold plating)
Contact material AgNi
Precautions If the plating is damaged, the following values can be applied
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 24 mA)
Limit continuous current to 6 A
Max. start-up current 16 A (20 ms, NO-contact)
Minimum switching current 5 mA (24 V)
Maximum power rating (resistive load) 144 W (24 V DC)
124 W (for 48 V DC)
108 W (can be used for 60 V DC)
52 W (for 110 V DC)
48 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.22 A (at 120 V, 13 DCs)
0.11 A at 250 V, DC13
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1 A (at 240 V, AC15)
overview
Test voltage 2.5 kVrms (50 Hz, 1 minute, coil/contact)
2 kVrms (50 Hz, 1 minute, CO contact/CO contact)
Mode of operation 100% working factor
Installation Position Any
Connection: Push-in connection
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix single relay with manual operation locking function - REL-IR4/L-120AC/4X21AU - 2903684 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
PLC-RSC-230UC/21HC/EX - 2909521
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. It has been approved according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
Phoenix/Phoenix Single Relay REL-MR- 24DC/ 1ICT - 2987338
Pluggable miniature power relay with tungsten front contacts for high impulse currents up to 800 A peak, 1 NO contact, input voltage: 24 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection can be achieved up to RT I...
|
|
Phoenix/Phoenix relay modules EMG 25-REL/KSR-230/2X21AU/SO46 - 2964843
Interference immunity on the control side of the relay interface with solid-state miniature electromagnetic relay, contact (Au): small load, 2PDT, input voltage 230V AC
Maximum power consumption under rated conditions is 4.14 W
Test voltage (coil/contact) 2.5 kV AC (50 Hz, 1 minute, coil/contact ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-OR3/L-230AC/3X21 - 2903696
Pluggable eight-position relay with power contacts, 3 PDT, test button, mechanical switch position display, input voltage 230 V AC
size
Width 35 mm
Height 35 mm
Depth 54.4 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 55 °C
Ambient temperature ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-120AC/21-21/MS - 2987969
Plug-in miniature relay with power contacts, 2 PDTs, test key, mechanical switch position display, status LED, coil voltage 120 V AC
advantage
The strap can detect manual operation
Mechanical switch position display
DC model with freewheeling diode
Switching current up to 16 A
Integration...
|
|
Phoenix/Phoenix relay module PLC-RPT- 48DC/21AU - 2900308
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal block with plug-in connection with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 1 PDT, input voltage 48 V DC
advantage
Low-profile design
Implemented via V8 adapter with ...
|
|
RIF-1-RPT-LDP-24DC/2X21AU - 2903330
Pre-assembled relay modules with plug-in connections, including: relay bases, multi-layer contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 24 V DC
changeover contacts
Switch contact type Single contact
Drive & Function Monostable ...
|
|
Phoenix/Phoenix relay module PLC-RPT-12DC/21/EX - 2909527
PLC-INTERFACE, consisting of DIN rail mounting, 6.2 mm base terminal with plug-in interface and plug-in miniature relay with 6 A power contact, 1 changeover contact, 12 V DC input voltage. Certified according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-120AC/21HC/MS - 2987901
Plug-in miniature relay with power contact, 1 PDT, test key, mechanical switch position display, status LED, input voltage 120 V AC
advantage
The strap can detect manual operation
Switching current up to 16 A
DC model with freewheeling diode
Integrated status LEDs
Mechanical switches ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 60DC/21HC - 2967659
PLC-INTERFACE, INCL. PLC-BSC.../21 HC base terminal, screw connection, with plug-in miniature relays, for high continuous currents, for mounting on DIN rail NS 35/7.5, ultimate continuous current up to 10 A, 1 PDT, input voltage 60 V DC
advantage
Place...
|
|
Phoenix/Phoenix relay module DEK-REL- 24/1/SEN - 2964050
Relay module for sensors with solid state miniature relays, contacts (AgNi+Au): Small to medium loads, 1 normally open contact, input voltage 24V AC/DC, mountable on NS 35/7.5, module thickness 6.2 mm
advantage
Reduced costs due to the elimination of N-terminals
Most...
|
|
Phoenix/Phoenix Single relay with manually operated locking function - REL-IR2/LDP-220DC/2X21 - 2903665
Plug-in industrial relay with power contacts, 2 PDTs, test button, status LED, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 220 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
...
|
|
Phoenix/Phoenix Time Relays Timing Relay - ETD-SL-1T-S - 2867924
Phoenix/Phoenix Time Relays Timing Relay - ETD-SL-1T-S - 2867924 timer relay for star/triangle start-up, supply voltage selectable using power module, 2 PDT
Product Description:
Safety and system reliability are increasingly being raised in all areas.
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/L- 24AC/4X21AU - 2903683
Plug-in industrial relay with power contacts and additional contacts plated with hard gold, 4 PDT, test button, status indication LED, mechanical switch setting display, coil voltage: 24 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Environment...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 60DC/21/MS - 2909643
Pluggable miniature power relay with power contact, 1 changeover contact, manual operation, 60 V DC input voltage
size
Width 5 mm
Height 28 mm
Depth 16 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 85 °C
Ambient temperature (storage/transportation)
|
|
Phoenix/Phoenix relay module RIF-1-RPT-LDP-24DC/1X21 - 2903342
Pre-assembled relay modules with plug-in connections, including: relay bases, high-power contact relays, plug-in display/suppressor modules and brackets. Contact type: 1 PDT. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input voltage range 1 ...
|
|
Phoenix/Phoenix relay modules EMG 10-REL/KSR-120/ 1-LC -2964432
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large loads, 1 NO contact, input voltage 120 V AC/DC
Advantages: Integrated input module and interference suppression module
The maximum power consumption under rated conditions is 0.6 W
Test voltage (coil ...
|
|
Phoenix relay EMG 17-REL/KSR-G 24/2E/SO38 - 2941646
Relay module, resistant to continuous high current, soldered with relay plug, contacts (AgSnO): medium to large loads, 1 normally open contact, input voltage 24V DC, maximum continuous current 10A, 2 inputs manual/automatic
advantage
Can be snapped onto standard EN DIN rails
...
|
|
REL-PR1-220DC/1/MB - 2908046
Plug-in high-power relay with power contacts, specially designed for switching high DC loads, 1 NO contact, arc extinguishing magnet, coil voltage: 220 V DC
Coil side
Rated input voltage UN 220 V DC
Input voltage range 187 V DC ... 242 V DC
UN-referenced input ...
|
|
Phoenix/Phoenix Single Relay REL-MR-BL- 24AC/21-21 - 1109546
Pluggable miniature power relay in basic design with power contacts, 2 changeover contacts, input voltage 24 V AC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 5x106 switching cycles
Insulation characteristics
Overvoltage category III
Pollution level 3 ...
|
|
Contact
working hours
