Plug-in miniature power relay with power contacts, 1 PDT, input voltage 24 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
size
Width 5 mm
Height 28 mm
Depth 15 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 85 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Protection class RT III
Coil side
Rated input voltage UN 24 V DC
The input voltage range referenced to UN is shown in the graph
Typical input current at UN is 7 mA
Typical response time is 5 ms
Typical release time is 2.5 ms
Coil resistance 3390 Ω ±10 % (at 20 °C)
Power consumption at rated conditions is 0.17 W
Contact side
Contact Type: 1 changeover contact
Switch contact type Single contact
Contact material AgSnO
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 100 mA)
Minimum switching current 10 mA at 12 V
Max. start-up current 10 A (4 s)
Limit continuous current to 6 A
Maximum power rating (resistive load) 140 W (24 V DC)
20 W (for 48 V DC)
18 W (can be used for 60 V DC)
23 W (for 110 V DC)
40 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.2 A (at 110 V, 13 DCs)
0.1 A (at 220 V, 13 DCs)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)
Motor load according to UL 508 1/4 HP, 240 - 277 V AC (normally open contact)
1/6 HP, 240 - 277 V AC (NC contact)
overview
Test voltage 4 kV AC (50 Hz, 1 minute, coil/contact)
Mode of operation 100% working factor
Mechanical life 2x 107 switching cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection: Welding
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix single relay with manual operation locking function - REL-MR- 24DC/21 - 2961105 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix Single Relay REL-PR-BL-230VAC/4X21 - 1157966
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 230 V AC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 switching cycles
Test voltage Coil/contact 2 kVrms (50 Hz ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 60DC/21-21AU - 2967303
PLC-INTERFACE, INCL. PLC-BSC.../21 BASE TERMINAL, SCREW CONNECTION, WITH PLUG-IN MINIATURE MULTI-LAYER GOLD-PLATED CONTACT RELAY FOR MOUNTING ON DIN RAIL NS 35/7.5, 2 PDTs, input voltage 60 V DC
advantage
Low-profile design
Effective via V8 adapter ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-OR3/LDP-220DC/3X21 - 2907027
Plug-in octal relay with power contacts, 3 changeover contacts, test button, mechanical switch position display, coil voltage: 220 V DC, response voltage (no pre-excitation at 23 °C≥ 60 % of rated voltage ... 80 %（≥132 V DC ... ≤176 V DC）
...
|
|
RIF-2-RSC-LV-230AC/4X21 relay module from Phoenix - 2903316
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 4 changeover contacts. Input voltage: 230 V AC
Maximum power consumption under rated conditions is 1.5 W
Test voltage ...
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/21AU - 2900311
PLC-INTERFACE, incl. PLC-BPT.../21 base terminals, plug-in connection, with plug-in miniature multi-layer gold-plated contact relays for mounting on DIN rail NS 35/7.5, 1 PDT, input voltage 230 V AC/220 V DC
advantage
Low-profile design
Adaptable via V8 ...
|
|
Phoenix/Phoenix relay modules RIF-1-RSC-LV-120AC/1X21 -2903356
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 1 changeover contact. Input voltage: 120 V AC
Maximum power consumption under rated conditions is 0.96 W
Test voltage ...
|
|
The Phoenix/Phoenix relay module PLC-RSC-230UC/21HC 2967675
PLC-INTERFACE, incl. PLC-BSC.../21 HC base terminal, screw connection, with plug-in miniature relays for high continuous currents, for mounting on DIN rail NS 35/7.5, ultimate continuous current up to 10 A, 1 PDT, input voltage 230 V AC/220 V D...
|
|
Phoenix/Phoenix relay module RIF-2-RPT-LV-230AC/4X21AU - 1188200
Prefabricated relay modules with plug-in interfaces, including: relay bases, multi-layer contact relays, pluggable display/interference suppression modules, and fixed brackets.
Contact type: 4 changeover contacts. Input voltage: 230 V AC
All suppliers of 76 Technology have been strictly audited ...
|
|
PLC-RPT-120UC/21/SO46 - 1125988
PLC-INTERFACE that resists current/voltage interference on the control side. Includes PLC-BPT-120UC/21/SO46 base terminal block with plug-in connection, plug-in miniature relay with power contacts up to 6 A, 1 changeover contact, 120 V AC input voltage
Maximum ...
|
|
Phoenix/Phoenix relay module EMG 17-REL/SG-B 24/21/M - 2952910
Relay module with soldered remanence miniature switching relay with negative switching diode wiring, contacts (AgSnO): small to large loads, 1 PDT, 24 V DC input voltage
Maximum power consumption of 0.19 W under rated conditions
Test voltage (coil/contact) 4 kVrms (5 ...
|
|
Phoenix/Phoenix relay modules EMG 17-REL/KSR-W230/21-21-LCAU-2941468
Relay module with solid state miniature electromagnetic relay, contacts (AgNi+Au): small to large loads, 2PDT, input voltage 230VAC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Integrated input module and interference suppression module
Rated ...
|
|
REL-IR4/120AC/4X21/EX - Phoenix/Single Relay - 2909744
Plug-in industrial relay, RT III sealed type, with power contacts, 4 changeover contacts, mechanical switch position indicator, polarity: non-polarized, input voltage: 120 V AC, combined with RIF-2.../EX base according to ATEX/IECEx (Zone 2) and hazardous area Class I, Zone 2 ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR - 24DC/21HC/MS - 2987888
Plug-in miniature relay with power contact, 1 PDT, test key, mechanical switch position display, status LED, freewheeling diode, polarity A1+, A2, input voltage 24 V DC
advantage
The strap can detect manual operation
Integrated status LEDs
Switching current up to 16 A
Mechanical ...
|
|
Phoenix/Phoenix relay module PLC-RSC-120UC/21-21AU - 2967138
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 120 V AC/110 V DC
Maximum power consumption under rated conditions 0.54 W ...
|
|
Relay module with manually operated locking - PLC-RPT- 24UC/21-21/MS - 2910520
PLC-INTERFACE, INCLUDING RELAY BASE AND PLUGGABLE POWER CONTACT RELAY WITH MANUAL OPERATION AND INTEGRATED STATUS LED, PUSH-IN CONNECTION, 2 CO CONTACTS, INPUT VOLTAGE: 24 V AC/DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental Strip ...
|
|
Phoenix/Phoenix relay module EMG 10-REL/KSR-120/ 1-LC AU - 2964461
Relay module with solid-state miniature electromagnetic relay, gold-plated contacts for small loads, 1 NO contact, input voltage 120 V AC/DC
Advantages: Integrated input module and interference suppression module
The maximum power consumption under rated conditions is 0.6 W
Test voltage (coil/contact) ...
|
|
REL-MR- 60DC/21-21 - 2961273 single relay
Pluggable miniature power relay with power contacts, 2 PDTs, input voltage 60 V DC
Benefits: RT III certified (wash-resistant), switching current up to 8 A
Coil side
Rated input voltage UN 60 V DC
Input voltage range 39 V DC ... 148.8 V DC
U ...
|
|
PLC-RPT-230UC/21-21/SO46 - 1136245
The use of a PLC-INTERFACE prevents interference currents or voltages on the control side. Includes base terminal with plug-in connection, with "hot" mating miniature relay with power contacts, 2 changeover contacts, 230 V AC input voltage
Test voltage Coil/contact 4 kVrms (50 ...
|
|
Phoenix/Phoenix Single Relay REL-MR- 12DC/1IC - 2904475
Plug-in miniature power relay with power contacts for high inrush currents, 1 NO contact, input voltage 12 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
Touch...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/100AC/4X21 - 2907055
Plug-in industrial relay with power contacts, 4 changeover contacts, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 100 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) ...
|
|
Contact
working hours
