Introduction: FlexTouch/Rorobot Passive Driver PCU-SMN
Features:
It is used in smart factories and other scenarios that require comprehensive, flexible and intelligent grabbing functions
Compressed air driven, with bi-directional gripping and opening functions
Fast working cycle, adjustable force and speed, and equipped with feedback signal and leakage alarm function (optional)
Standard communication interface, real-time communication control with robotic arm, PLC or I-control computer
Product parameters
Voltage rating: 24 VDC ± 10%
Rated power: 36 W
Input air supply: 0.45-1.00 MPa dry clean air, flow rate > 200 L/min
Output air pressure: -90 - 120kPa (regular version)
-90-350kPa (High Voltage Version)
Working mode: Continuously drives the gripper while the signal is received
Control mode:
a. I/O, 24V level signal, DB25 port
b. Modbus, TCP/RTU-485
C. Wireless remote control, 315MHz RF
Positive pressure flow: 140L/min
Positive pressure flow: 140L/min (PCU-HMN high-speed type)
Housing Material: Cast Aluminum
Size: 330x230x120 mm
Net weight: 5.8 kg
Degree of protection: IP53
Lifespan: 20 million times
Feedback methods
a. I/O, switching signal, DB25 port
b. Modbus, TCP/RTU-485
Negative pressure flow: 25L/min
Negative Pressure Flow: 40L/Min (PCU- HMN High Speed Type)
Lifespan: 2.0 kg
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.
This article introduces the soft-touch/Rorobot passive driver PCU-SMN products, if you are interested in the soft-touch/Rorobot driver, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Rorobot B-20008 Maximum load 15g
Introduction: Rorobot Soft Beak B-20008
Features:
Replaceable flexible chucks
The fingertips are open in the positive pressure state, clamped in the negative pressure state, and the fingertips are adjustable from G
It can be used as a clamp or external support
Recommended for use with soft-touch actuators
Products...
|
|
Soft-Touch/Rorobot Slip Mount SMP-3L slot width 4.2mm
Introduction: Soft-Touch/Rorobot Slip Mounts SMP-3L
Features:
It is divided into different styles according to the shape and length of the groove
It can be used for assembly between the finger module [FM] and the flange connection module [FCM].
The mounting angle and position of the finger module [FM] can be adjusted freely
...
|
|
Soft Touch/Rorobot Finger Module FMA6-V3 Finger length 83mm
Introduction: Rorobot Finger Module FMA6-V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted.
Features:
Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing ...
|
|
Rorobot B-3B18 weight 6.4g
Introduction: Rorobot Soft Beak B-3B18
Features:
Replaceable flexible chucks
The fingertips are open in the positive pressure state, clamped in the negative pressure state, and the fingertips are adjustable from G
It can be used as a clamp or external support
Recommended for use with soft-touch actuators
Product References ...
|
![Rorobot B-4B50[P]/S The recommended load is 500g](https://www.76kj.cn/data/attachment/forum/202208/01/152618pdc4o5fomstit5m2.jpg)
|
Rorobot B-4B50[P]/S The recommended load is 500g
Introduction: Rorobot B-4B50/S
Features:
The fingertip is open in the positive pressure state, clamped in the vacuum state, it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G and the external support finger distance D.
Soft-touch materials are divided into conventional ...
|
|
Soft Touch/Rorobot Finger Module B5V4 Module width 25mm
Introduction: Rorobot Finger Module B5V4, Features and Applicable Scenarios: Large clamping force, can be used in series (using screw accessory package PK) and simplifies the trachea arrangement. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the width of the workpiece is generally greater than 50mm.
Features:
...
|
|
SoftTouch/Rorobot Finger Module FM-B5V2 Module width 25mm
Introduction: Rorobot Finger Module FM-B5V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Adjustable Finger Spacing and Angle, Fixing Method: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional)
...
|
|
Rorobot B-20006 Accuracy range: 0.05mm
Introduction: Rorobot Soft Beak B-20006
Features:
Replaceable flexible chucks
The fingertips are open in the positive pressure state, clamped in the negative pressure state, and the fingertips are adjustable from G
It can be used as a clamp or external support
Recommended for use with soft-touch actuators
Products...
|
|
Soft Touch/Rorobot Finger F-C7 Negative pressure stroke 29mm
Introduction: Soft Touch/Rorobot Finger F-C7
Features:
The finger material can be selected as regular type, reinforced type [H] and anti-static type [AS].
The reinforced grade [H] has a higher operating pressure range and a gripping force of up to 300% of the fingers of conventional grades.
Defend...
|
|
Soft Touch/Rorobot Slip Mounting Plate SMP-2L thickness 8mm
Introduction: Soft-Touch/Rorobot Skid Shift Mounting Plate SMP-2L
Features:
It is divided into different styles according to the shape and length of the groove
It can be used for assembly between the finger module [FM] and the flange connection module [FCM].
The mounting angle and position of the finger module [FM] can be adjusted freely
...
|
|
Rorobot Air Driver iPCU 2 Rated voltage 24VDC±10%
Introduction: iPCU 2 is available as a standard iPCU 2-SMN and a high-speed iPCU 2-HMN compact controller. Small size, light weight, easy installation. The high-speed type has a larger flow rate and faster response speed, and is suitable for high-speed handling conditions.
...
|
![Rorobot BMC-3G20[HAS]/S](https://www.76kj.cn/data/attachment/forum/202210/27/164433uy0mddh70q21iy40.jpg)
|
Rorobot BMC-3G20[HAS]/S
Introduction: Rorobot BMC-3G20[HAS]/S
Features:
The fingertip is open in the positive pressure state, and the vacuum state is clamped, and it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G.
Soft-touch materials are divided into regular [H] and non-...
|
![Rorobot BML-4H18[H]/S The recommended load is 15g](https://www.76kj.cn/data/attachment/forum/202212/21/162000ph6khw9vkqrwkhau.jpg)
|
Rorobot BML-4H18[H]/S The recommended load is 15g
Introduction: Rorobot BML-4H18[H]/S
Features:
The fingertips are open in the positive pressure state, clamped in the negative pressure state, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by using the external support fingertip distance D.
The soft claw material is divided into conventional type [H and non-marking ...
|
|
SoftTouch/Rorobot Finger Module C4V5 Module height 44mm
Introduction: Rorobot Finger Module C4V5, Features and Applicable Scenarios: The module is thinner and lighter, and the minimum finger spacing of the mounting module is only 10mm, which is suitable for clamping tiny, thin and light workpieces. It can also be used in series (using the screw kit PK), but compared to the V4, each finger needs to be supplied with air independently.
|
|
Soft Touch/Rorobot Finger Module FM-C5V2 Finger width 12mm
Introduction: Rorobot Finger Module FM-C4V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Adjustable Finger Spacing and Angle, Fixation: Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional)
...
|
|
Soft Touch/Rorobot Finger Module C4V3 Module height 46mm
Introduction: Rorobot Finger Module C4V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted.
Features:
Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and ...
|
|
Soft Touch/Rorobot Finger Module FM Finger Size L41×W24mm
Introduction: Finger module FM is the action execution module of soft touch gripper, which is composed of two parts: finger F and fixed module, according to the air intake mode, installation position, combination method, select the appropriate finger fixed module. According to the weight and size of the workpiece to be clamped, the size of the required clamping force, ...
|
|
Rorobot B-3B14 weight 6.1g
Introduction: Rorobot Soft Beak B-3B14
Features:
Replaceable flexible chucks
The fingertips are open in the positive pressure state, clamped in the negative pressure state, and the fingertips are adjustable from G
It can be used as a clamp or external support
Recommended for use with soft-touch actuators
Product References ...
|
![Rorobot BMC-20201[H]/S The recommended load is 10g](https://www.76kj.cn/data/attachment/forum/202302/07/154953lstaxrztwnmpxhtk.jpg)
|
Rorobot BMC-20201[H]/S The recommended load is 10g
Introduction: Rorobot BMC-20201[H]/S
Features:
The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G
The soft claw material is divided into conventional type and non-marking type, ...
|
![Rorobot BMC-4B32[HAS]/S](https://www.76kj.cn/data/attachment/forum/202306/02/161859gjtjnnicuz3u0nna.jpg)
|
Rorobot BMC-4B32[HAS]/S
Introduction: Rorobot Robot BMC-4B32[HAS]/S
Features:
The fingertips are open in the positive pressure state, and the clamping is in the vacuum state, and it is recommended to use the soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertips G and the outer support fingertips D.
Soft claws ...
|
|
Contact
working hours
