Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 12 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 70 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Protection class RT I
Coil side
Rated input voltage UN 12 V DC
Typical input current at UN is 78 mA
Typical response time is 13 ms
Typical release time is 14 ms
Protection circuit: Damping diode
The status display LED is yellow
Power consumption at rated conditions is 0.94 W
Contact side
Contact Type: 4 PDT
Switch contact type Single contact
Contact material AgNi, hard gold plating
Precautions When the given limit values are exceeded, the gold plating layer is destroyed. If it continues to be used, the maximum value of the high-power relay applies. Compared to using the power contact alone, the service life is reduced.
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 2 V (at 24 mA)
Minimum switching current 2 mA (24 V DC)
The maximum starting current is 50 mA
Limit continuous current to 50 mA
Maximum power rating (resistive load) 1.2 W (24 V DC)
The minimum on-off capacity is 48 mW
Motor load 1/3 HP, 240 V AC in accordance with UL 508
Contact surface (with destructible gold plating)
Contact material AgNi
Precautions If the plating is damaged, the following values can be applied
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 24 mA)
Limit continuous current to 6 A
Max. start-up current 16 A (20 ms, NO-contact)
Minimum switching current 5 mA (24 V)
Maximum power rating (resistive load) 144 W (24 V DC)
124 W (for 48 V DC)
108 W (can be used for 60 V DC)
52 W (for 110 V DC)
48 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.22 A (at 120 V, 13 DCs)
0.11 A at 250 V, DC13
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1 A (at 240 V, AC15)
overview
Test voltage 2.5 kVrms (50 Hz, 1 minute, coil/contact)
2 kVrms (50 Hz, 1 minute, CO contact/CO contact)
Mode of operation 100% working factor
Mechanical life: approx. 2x 107 cycles
Installation Position Any
Connection: Push-in connection
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix single relay with manual operation locking function - REL-IR4/LDP- 12DC/4X21AU - 2903669 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix relay module with manually operated locking - RIF-1-RSC-LV-230AC/1X21MS - 2905661
Prefabricated relay modules with screw connections, including relay bases, relay brackets, plug-in interference suppression modules, and power contact relays with test buttons and integrated status LEDs. Contact type: 1 changeover contact. Input voltage: 230 V AC
RIFLINE END ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-110DC/21HC/MS - 1012737
Plug-in miniature relay with power contact, 1 changeover contact, test key, mechanical switch position indicator, status LED, freewheeling diode, polarity A1+, A2-, input voltage 110 V DC
advantage
The strap can detect manual operation
Integrated status LEDs
Switching current max. 16 A ...
|
|
RIF-1-RSC-LV-24AC/1X21 - 2903357
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 1 changeover contact. Input voltage: 24 V AC
The maximum power consumption under rated conditions is 0.79 W
Test voltage ...
|
|
PLC-RPT-120UC/21HC -2900296 relay module from Phoenix
The PLC-INTERFACE is suitable for high continuous currents and includes PLC-BPT.../21 HC base terminals with plug-in connection with plug-in miniature relays for mounting on the DIN rail NS 35/7.5 with a limit continuous current of up to 10 A, 1 PDT, input voltage 120 V AC/DC
Excellent...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/21-21AU - 2900338
PLC-INTERFACE, incl. PLC-BPT.../21-21 base terminal with plug-in connection with plug-in miniature multilayer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 24 V DC
advantage
Low-profile design
Implemented via V8 adapter ...
|
|
Phoenix/Phoenix Time Relays Timing Relays - ETD-FL-2T-DTI - 2866187
Multifunctional timing relay with 7 functions and two adjustable time ranges (50 ms - 10 h), wide area power supply, 2 PDT
Product Description:
Increasing demands are placed on safety and system reliability in all areas. Mechanical engineering, chemical industry, power plants and automation technology ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/LDP-220DC/4X21AU - 2903675
Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 220 V DC
size
Width 21.2 mm
Height 27.5 mm ...
|
|
RIF-1-RSC-LDP-24DC/1X21 relay module from Phoenix - 2903358
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 1 changeover contact. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input...
|
|
Relay module with manually operated locking - PLC-RSC- 48DC/21-21/MS - 2910504
PLC-INTERFACE, INCLUDING RELAY BASE AND PLUGGABLE POWER CONTACT RELAY (WITH MANUAL OPERATION, INTEGRATED STATUS LED AND FREEWHEELING DIODE), SCREW CONNECTION, 2 CO CONTACTS, INPUT VOLTAGE: 48 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/L-230AC/4X21AU - 2903685
Pluggable industrial relay with power contacts and additional contacts plated hard gold, 4PDT, test button, status indication LED, mechanical switch setting display, coil voltage: 230VAC
size
Width 21.2mm
Height 27.5mm
Depth 35.6mm
Environmental conditions
Ambient temperature (...
|
|
Phoenix/Phoenix relay modules EMG 25-REL/KSR-230/2X21AU/SO46 - 2964843
Interference immunity on the control side of the relay interface with solid-state miniature electromagnetic relay, contact (Au): small load, 2PDT, input voltage 230V AC
Maximum power consumption under rated conditions is 4.14 W
Test voltage (coil/contact) 2.5 kV AC (50 Hz, 1 minute, coil/contact ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 12DC/21/MS - 2909641
Plug-in miniature power relay with power contact, 1 changeover contact, manual operation, 12 V DC input voltage
size
Width 5 mm
Height 28 mm
Depth 16 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 85 °C
Ambient temperature (storage/transportation)
|
|
Phoenix/Phoenix relay module - RIF-2-RPT-LV-230AC/4X21 - 2903304
Pre-assembled relay modules with plug-in connections, including: relay bases, high-power contact relays, plug-in display/suppressor modules and brackets. Contact type: 4 PDTs. Input voltage: 230 V AC
Coil side
Rated input voltage UN 230 V AC
Input...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/LDP- 60DC/4X21 - 2903679
Plug-in industrial relay with power contacts, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2–, coil voltage: 60 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ring...
|
|
Phoenix/Phoenix relay module PLC-RSC-125DC/21AU - 2980034
PLC-INTERFACE, INCL. PLC-BSC.../21 BASE TERMINAL, SCREW CONNECTION, WITH PLUG-IN MINIATURE MULTI-LAYER GOLD-PLATED CONTACT RELAY FOR MOUNTING ON DIN RAIL NS 35/7.5, 1 PDT, input voltage 125 V DC
The maximum power consumption under rated conditions is 0.38 W
Test Electricity ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/LDP- 24DC/4X21 - 2903677
Plug-in industrial relay with power contact, 4 PDT, test key, status LED, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 24 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35 ...
|
|
RIF-2-RPT-LV-230AC/2X21 relay module from Phoenix/Phoenix - 2903310
Pre-assembled relay modules with plug-in connections, including: relay bases, high-power contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 230 V AC
Coil side
Rated input voltage UN 230 V AC
Input voltage range ...
|
|
Phoenix/Phoenix relay module PLC-RSC-120UC/21-21/MS-2910505
PLC-INTERFACE, including relay base and pluggable power contact relay (with manual operation and integrated status LED), screw connection, 2 changeover contacts, bridge rectifier, input voltage: 120 V AC / 110 V DC
The maximum power consumption under rated conditions is 0.6 W
Measure...
|
|
Phoenix/Phoenix Single Relay REL-MR- 24DC/1IC - 2961341
Plug-in miniature power relay with power contacts for high impulse currents up to 130 A peak, 1 NO contact, input voltage: 24 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III ...
|
|
RIF-3-RSC-LV-120AC/3X21 - 2903299
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 3 changeover contacts. Input voltage: 120 V AC
The maximum power consumption under rated conditions is 2.8 W
Test voltage ...
|
|
Contact
working hours
