Pluggable industrial relay with power contacts and additional contacts plated hard gold, 4PDT, test button, status indication LED, mechanical switch setting display, coil voltage: 230VAC
size
Width 21.2mm
Height 27.5mm
Depth 35.6mm
Environmental conditions
Ambient temperature (operating) -40°C... 55°C
Ambient temperature (storage/transport) -40°C... 85°C
Protection class RTI
Coil side
Rated input voltage UN 230VAC
Trunk frequency 50/60Hz
Typical input current at UN is 6.5mA
Typical response time 5ms... 15ms (phase dependent)
Typical release time range 5ms... 20ms (phase dependent)
The status display LED is yellow
Power consumption at rated conditions is 1.5W
Contact side
Contact Type: 4 PDT
Switch contact type Single contact
Contact material AgNi, hard gold plating
Precautions When the given limit values are exceeded, the gold plating layer is destroyed. If it continues to be used, the maximum value of the high-power relay applies. Compared to using the power contact alone, the service life is reduced.
The maximum switching voltage is 30VAC
36VDC
Minimum switching voltage 2V (at 24mA)
Minimum Switching Current: 2mA (24VDC)
The maximum starting current is 50mA
Limit continuous current to 50mA
Maximum Rated Power (Resistive Load) 1.2W (24VDC)
The minimum on-off capacity is 48mW
Contact surface (with destructible gold plating)
Contact material AgNi
Precautions If the plating is damaged, the following values can be applied
The maximum switching voltage is 250VAC/DC
Minimum switching voltage 5V (at 24mA)
Limit continuous current to 6A
Maximum start-up current 16A (20ms, NO contact)
Minimum switching current: 5mA (24V)
Maximum Rated Power (Resistive Load) 144W (24VDC)
124W (can be used for 48VDC)
108W (can be used for 60VDC)
52W (can be used for 110VDC)
48W (can be used for 220VDC)
1500VA (can be used for 250VAC)
Switching capacity 2A (at 24V, 13 DCs)
0.22A (at 120V, DC13)
0.11A (at 250V, DC13)
1.5A (at 24V, AC15)
1.5A (at 120V, AC15)
1A (at 240 V, 15 AC)
overview
Test voltage 2.5kVrms (50Hz, 1 minute, coil/contact)
2kVrms (50Hz, 1 minute, CO Contact/CO Contact)
Mode of operation 100% working factor
Mechanical life: about 2x107 times
Installation Position Any
Connection: Push-in connection
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix / Phoenix with manual operation lock function of a single relay - REL-IR4/L-230AC/4X21AU-2903685 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance, and give you a surprise.
|
More on that
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/LDP- 60DC/4X21AU - 2903672
Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 60 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
...
|
|
Relay module with manually operated locking - PLC-RSC-125DC/21AU/MS - 2909658
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, plug-in miniature relay with multi-layer gold-plated contacts and manual operation, 1 changeover contact, 125 V DC input voltage
size
Width 6.2 mm
Height 80 mm
Depth 9 ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR2/100AC/2X21 - 2907052
Plug-in industrial relay with power contacts, 2 changeover contacts, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 100 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) ...
|
|
Phoenix/Phoenix relay module - PLC-RSC- 12DC/21AU/MS - 2909654
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, plug-in miniature relay with multi-layer gold-plated contacts and manual operation, 1 changeover contact, 12 V DC input voltage
size
Width 6.2 mm
Height 80 mm
Depth 94 ...
|
|
Phoenix/Phoenix safety relays - REL-SR- 24DC/3X1AU/1X2AU/FG 1157954
Safety relays with mechanically interlocking contacts in accordance with DIN EN 61810-3 (Class A), input voltage 24 V DC, with multi-layer gold-plated contacts, 3 NO contacts and 1 NC contact
The maximum power consumption under rated conditions is 0.36 W
Test voltage Coil/contact 4 ...
|
|
Phoenix/Phoenix relay module PLC-RPT-120UC/21-21AU -2900342
PLC-INTERFACE, incl. PLC-BPT.../21-21 base terminal with plug-in connection with plug-in miniature multilayer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 120 V AC/DC
advantage
Low-profile design
Via V8 adapter ...
|
|
RIF-1-RSC-LV-230AC/2X21AU relay module from Phoenix/Phoenix 2903343
Prefabricated relay modules with screw connections, including: relay bases, multi-layer contact relays, pluggable display/interference mitigation modules, and brackets. Contact type: 2 changeover contacts. Input voltage: 230 V AC
Test voltage (coil/contact) 4 kVrms (50 h ...
|
|
Phoenix/Phoenix relay module PLC-RSC-12DC/21-21/EX - 2909517
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with screw connection and plug-in relay with power contact, 2 changeover contacts, 12 V DC input voltage. It is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2.
Rated...
|
|
Phoenix/Phoenix relay module PLC-RPT- 48DC/21HC - 2900294
The PLC-INTERFACE is suitable for high continuous currents and consists of PLC-BPT.../21 HC base terminals with plug-in connection with plug-in miniature relays for mounting on the DIN rail NS 35/7.5 with a maximum continuous current of up to 10 A, 1 PDT, and an input voltage of 48 V DC
advantage
...
|
|
Phoenix/Phoenix Single Relay REL-MR- 24DC/1IC - 2961341
Plug-in miniature power relay with power contacts for high impulse currents up to 130 A peak, 1 NO contact, input voltage: 24 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III ...
|
|
Phoenix relay EMG 17-REL/KSR-G 24/2E/SO38 - 2941646
Relay module, resistant to continuous high current, soldered with relay plug, contacts (AgSnO): medium to large loads, 1 normally open contact, input voltage 24V DC, maximum continuous current 10A, 2 inputs manual/automatic
advantage
Can be snapped onto standard EN DIN rails
...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR2/L-230AC/2X21 - 2903668
Plug-in industrial relay with power contacts, 2 PDTs, test keys, status LEDs, mechanical switch position display, input voltage: 230 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 55 ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 24DC/21/MS - 2909642
Plug-in miniature power relay with power contact, 1 changeover contact, manual operation, 24 V DC input voltage
size
Width 5 mm
Height 28 mm
Depth 16 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 85 °C
Ambient temperature (storage/transportation)
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/21-21AU - 2900343
PLC-INTERFACE, incl. PLC-BPT.../21-21 base terminal with plug-in connection with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 230 V AC/DC
advantage
Low-profile design
Via V8 adapter ...
|
|
RIF-2-RPT-LDP-24DC/4X21 AU - 2908332
Pre-assembled relay module with plug-in interface, including relay base, high-power contact relay (hard gold plated) and bracket. Contact type: 4 changeover contacts. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input voltage range ...
|
|
RIF-1-RSC-LDP-24DC/1X21 relay module from Phoenix - 2903358
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 1 changeover contact. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input...
|
|
Phoenix/Phoenix relay module PLC-RSC-24DC/1/SSI - 1094761
PLC-INTERFACE, CONSISTING OF BASE TERMINALS WITH SCREW CONNECTION AND "HOT" PLUGGABLE MINIATURE RELAYS AS WELL AS INTERNAL AMPLIFIER CIRCUITRY AND A SUITABLE AUXILIARY POWER SUPPLY FOR WEAK SIGNAL SOURCES, 1 NO NO U, 24 V DC RATED INPUT VOLTAGE
Coil side
Rated input voltage UN 24 V DC
...
|
|
Phoenix Relays RIF-2-RPT-LV-120AC/4X21 - 2903305
Pre-assembled relay modules with plug-in connections, including: relay bases, high-power contact relays, plug-in display/suppressor modules and brackets. Contact type: 4 PDTs. Input voltage: 120 V AC
Rated input voltage UN 120 V AC
Input voltage range 96 V AC ...
|
|
Relay module with manually operated locking - PLC-RPT-230UC/ 1AU/MS/SEN - 2909680
The PLC-INTERFACE is suitable for input functions, including PLC-BPT.../SEN base terminals with plug-in connection with plug-in miniature relays with multi-layer gold-plated contacts and manual operation, 1 normally open contact, 230 V AC/220 V DC input voltage
size
Width 6.2 ...
|
|
Relay module with manually operated locking - PLC-RPT- 24UC/21-21/MS - 2910520
PLC-INTERFACE, INCLUDING RELAY BASE AND PLUGGABLE POWER CONTACT RELAY WITH MANUAL OPERATION AND INTEGRATED STATUS LED, PUSH-IN CONNECTION, 2 CO CONTACTS, INPUT VOLTAGE: 24 V AC/DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental Strip ...
|
|
Contact
working hours
