Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 220 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 70 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Protection class RT I
Coil side
Rated input voltage UN 220 V DC
Typical input current at UN is 4 mA
Typical response time is 13 ms
Typical release time is 14 ms
Protection circuit: Damping diode
The status display LED is yellow
Power consumption at rated conditions is 0.88 W
Contact side
Contact Type: 4 PDT
Switch contact type Single contact
Contact material AgNi, hard gold plating
Precautions When the given limit values are exceeded, the gold plating layer is destroyed. If it continues to be used, the maximum value of the high-power relay applies. Compared to using the power contact alone, the service life is reduced.
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 2 V (at 24 mA)
Minimum switching current 2 mA (24 V DC)
The maximum starting current is 50 mA
Limit continuous current to 50 mA
Maximum power rating (resistive load) 1.2 W (24 V DC)
The minimum on-off capacity is 48 mW
Motor load 1/3 HP, 240 V AC in accordance with UL 508
Contact surface (with destructible gold plating)
Contact material AgNi
Precautions If the plating is damaged, the following values can be applied
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 24 mA)
Limit continuous current to 6 A
Max. start-up current 16 A (20 ms, NO-contact)
Minimum switching current 5 mA (24 V)
Maximum power rating (resistive load) 144 W (24 V DC)
124 W (for 48 V DC)
108 W (can be used for 60 V DC)
52 W (for 110 V DC)
48 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.22 A (at 120 V, 13 DCs)
0.11 A at 250 V, DC13
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1 A (at 240 V, AC15)
overview
Test voltage 2.5 kVrms (50 Hz, 1 minute, coil/contact)
2 kVrms (50 Hz, 1 minute, CO contact/CO contact)
Mode of operation 100% working factor
Mechanical life: approx. 2x 107 cycles
Installation Position Any
Connect your data
Connection: Push-in connection
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is a single relay with manual operation locking function of Germany brand Phoenix/Phoenix - REL-IR4/LDP-220DC/4X21AU - 2903675 products, the purpose of 76 Technology is to survive by quality, develop by reputation, and eternity by service, give us a chance and give you a surprise.
|
More on that
|
RIF-1-RPT-LDP-24DC/2X21 - 2903334
Pre-assembled relay modules with plug-in connections, including: relay bases, high-power contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 24 V DC
Product Type: Relay Module
Application Universal
Operating mode 100% ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-110DC/21-21/MS - 1012698
Plug-in miniature relay with power contacts, 2 changeover contacts, test button, mechanical switch position indicator, status LED, freewheeling diode, polarity A1+, A2, input voltage 110 V DC
advantage
The strap can detect manual operation
DC model with freewheeling diode
Integration status l...
|
|
Relay module with manually operated locking - PLC-RSC- 24UC/21/MS - 2909650
PLC-INTERFACE, INCL. PLC-BSC.../21 BASE TERMINAL, SCREW CONNECTION, PLUG-IN MINIATURE RELAY WITH POWER CONTACTS AND MANUAL OPERATION, 1 CO CONTACT, 24 V AC/DC input voltage
Advantage: Low-profile design
Precautions
Comment Type ...
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/21-21AU/RWF - 2900345
PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature multi-layer gold-plated contact relays, range: 0.75 x UN to 1.15 x UN, rated input frequency 16.7 Hz, 2 PDT, input voltage 230 V AC
Rated ...
|
|
Phoenix/Phoenix Single Relay REL-MR-230AC/21HC - 2961422
Plug-in miniature power relay with power contacts for high continuous current, 1 PDT, input voltage 230 V AC
advantage
RT III certified (wash-resistant)
Switching current up to 16 A
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life ...
|
|
Phoenix/Phoenix relay module PLC-RPT-120UC/ 1AU/SEN - 2900314
The PLC-INTERFACE is suitable for input functions, including the PLC-BPT.../SEN base terminals with plug-in connection with plug-in miniature multi-layer gold-plated contact relays for mounting on the DIN rail NS 35/7.5, 1 normally open contact, input voltage 120 V AC/110 V DC
advantage
...
|
|
Phoenix/Phoenix Single Relay REL-PR-BL-125DC/4X21 - 1157973
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 125 V DC
Test voltage coil/contact 2 kVrms (50 Hz, 1 minute, coil/contact)
Test voltage CO contact/CO contact 2 kVrms (50 Hz, 1 min ...
|
|
Phoenix/Phoenix relay modules EMG 25-REL/KSR-230/2X21AU/SO46 - 2964843
Interference immunity on the control side of the relay interface with solid-state miniature electromagnetic relay, contact (Au): small load, 2PDT, input voltage 230V AC
Maximum power consumption under rated conditions is 4.14 W
Test voltage (coil/contact) 2.5 kV AC (50 Hz, 1 minute, coil/contact ...
|
|
REL-PR3-220DC/3X21 - 2909055
Plug-in high-power relay with power contacts, 3 switching contacts, coil voltage: 220 V DC
Coil side
Rated input voltage UN 220 V DC
Input voltage range 187 V DC ... 242 V DC (see graph)
Typical input current at UN is 6 mA
UN's loss ...
|
|
Phoenix/Phoenix relay modules EMG 10-REL/KSR-230/21-LC AU -2964393
Relay module with solid-state miniature electromagnetic relay, gold-plated contacts for small loads, 1PDT, input voltage 230 V AC/DC
advantage
Integrated input module and interference suppression module
The maximum power consumption under the rated condition is 1.15 W
Test voltage (coil/contact) ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 12DC/21 - 2966906
The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and plug-in miniature relays with multi-level contacts, can be mounted on NS 35/7.5 rails, 1PDT, input voltage 12 V DC
advantage
Low-profile design
Efficient system with V8 adapter ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24DC/ 1IC/ACT - 2967604
The PLC-INTERFACE is suitable for high inrush currents and consists of PLC-BSC.../1 IC/ACT base terminal with screw connection with plug-in miniature relay for mounting on DIN rail NS 35/7.5, impulse current up to 130 A, 1 NO contact, input voltage 24 V DC
Excellent...
|
|
Relay module with manually operated locking - PLC-RPT-230UC/21AU/MS - 2909676
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal, plug-in connection, with plug-in miniature relay with multi-layer gold-plated contacts and manual operation, 1 changeover contact, 230 V AC/220 V DC input voltage
size
Width 6.2 mm
Height 80 mm
...
|
|
Phoenix/Phoenix relay module PLC-RSC-230UC/ 2AU/SEN-2966443
The PLC-INTERFACE is suitable for input functions, including the PLC-BSC.../SEN base terminal with screw connection with plug-in miniature multilayer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 1 NC contact, input voltage 230 V AC/220 V DC
Rated ...
|
|
Phoenix/Phoenix relay modules DEK-REL- 24/1/AKT- 2964063
Relay module for actuators with solid state miniature relays, contacts (AgNi+Au): small to medium loads, 1 normally open contact, input voltage 24V AC/DC, mountable on NS 35/7.5, module thickness 6.2mm
advantage
Reduced costs due to the elimination of N-terminals
Most...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR2/24DC/2X21 - 2907051
Plug-in industrial relay with power contacts, 2 changeover contacts, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 24 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) ...
|
|
Phoenix/Phoenix relay module - RIF-4-RPT-LDP-24DC/3X21 2903278
Pre-assembled relay modules with plug-in connections, including: relay base, high-power contact relay and bracket. Contact type: 3 PDT. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input voltage range 20.4 V DC ... 26.4 V DC ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-OR3/L- 24AC/3X21 - 2903694
Pluggable octal relay with power contacts, 3PDT, test button, mechanical switch position display, coil voltage 24V AC
size
Width 35 mm
Height 35 mm
Depth 54.4 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 55 °C
Ambient temperature ...
|
|
Phoenix/Phoenix relay modules RIF-RPT-LDP-24DC/2X2/2X1/AU/FG - 1148699
Relay modules with plug-in connection, including: relay base and status LEDs, freewheeling diodes and clamps, safety relay with mechanically interlocking contacts (acc. to DIN EN 61810-3), contact type: 2 NO and 2 NC, input voltage: 24 V DC ...
|
|
Relay module with manually operated locking - PLC-RSC- 24DC/21-21AU/MS - 2910507
PLC-INTERFACE, including relay base and pluggable multi-layer gold contact relay with manual operation, integrated status LEDs and freewheeling diode, screw connection, 2 changeover contacts, input voltage: 24 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Contact
working hours
