Prefabricated relay modules with screw connections, including relay bases, relay brackets, plug-in interference suppression modules, and power contact relays with test buttons and integrated status LEDs. Contact type: 1 changeover contact. Input voltage: 230 V AC
The pluggable electromechanical and solid state relays as well as the base in the complete RIFLINE product range are certified and approved according to UL 508.
You can call up the relevant license certificate for each corresponding component that you want to view.
size
Width 16 mm
Height 90 mm
Depth 75 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 50 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Degree of protection IP20 (relay base)
RT II (Relay)
Coil side
Rated input voltage UN 230 V AC (50/60 Hz)
Trunk frequency 50/60 Hz
Typical input current at UN is 4.5 mA
Typical response time 4 ms ... 12 ms
Typical release time range 4 ms ... 20 ms
Coil voltage 230 V AC
Protection circuit varistor
The operating voltage is displayed with a yellow LED
Power consumption at rated condition is 0.81 W
Contact side
Contact Type: 1 changeover contact
Switch contact type Single contact
Contact material AgNi
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 12 V at 10 mA
Minimum switching current 10 mA at 12 V
Maximum start-up current 32 A (20 ms, NO contact)
Limit continuous current to 8 A (see graph)
Maximum power rating (resistive load) 240 W (24 V DC)
62 W (for 48 V DC)
48 W (for 60 V DC)
52 W (for 110 V DC)
66 W (for 220 V DC)
2500 VA (can be used for 250VAC)
Minimum on-off capacity 120 mW
Switching capacity 2 A (at 24 V, 13 DCs)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 240 V, AC15)
overview
Test voltage 4 kVrms (50 Hz, 1 minute, coil/contact)
Mode of operation 100% working factor
Flammability rating according to UL 94 V2 (enclosure)
Mechanical life: approx. 5 x 106 cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection Name Coil Side
Connection: Screw connection
Stripping length 8 mm
Rigid conductor cross-section 0.5 mm² ... 4 mm²
Rigid conductor cross-section (2 wires with the same cross-section) 0.5 mm² ... 2.5 mm²
Flexible conductor cross-section 0.5 mm² ... 4 mm²
0.5 mm² … 4 mm² (ferrule with plastic sleeve)
Flexible conductor cross-section (2 wires with the same cross-section) 0.5 mm² ... 2.5 mm²
0.5 mm² … 1.5 mm² (TWIN sleeve with plastic insulating sleeve)
Attachable guide cross-section AWG 20 ... 10 (Rigid)
20 … 12 (Flexible)
Torque 0.5 Nm ... 0.6 Nm
Connect to data2
Connection Name Contact Side
Connection: Screw connection
Stripping length 8 mm
Rigid conductor cross-section 0.5 mm² ... 4 mm²
Rigid conductor cross-section (2 wires with the same cross-section) 0.5 mm² ... 2.5 mm²
Flexible conductor cross-section 0.5 mm² ... 4 mm²
0.5 mm² … 4 mm² (ferrule with plastic sleeve)
Flexible conductor cross-section (2 wires with the same cross-section) 0.5 mm² ... 2.5 mm²
0.5 mm² … 1.5 mm² (TWIN sleeve with plastic insulating sleeve)
Attachable guide cross-section AWG 20 ... 10 (Rigid)
20 … 12 (Flexible)
Torque 0.5 Nm ... 0.6 Nm
Standards and Specifications
Standard/Procedure DIN EN 50178
Rated insulation voltage 250 V AC
Rated overvoltage 6 kV
Insulation: Safety isolation
Pollution class 2
Overvoltage category III
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix relay module with manual operation locking function - RIF-1-RSC-LV-230AC/1X21MS - 2905661 products, the purpose of 76 Technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix relay module PLC-RPT-230UC/21HC/EX - 2909534
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with plug-in interface and plug-in relay with 10 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/ 1AU/MS/SEN - 2909678
The PLC-INTERFACE is suitable for input functions, including the PLC-BPT.../SEN base terminal with plug-in connection with plug-in miniature multi-layer gold-plated contact relays, manual operation, 1 normally open contact, 24 V DC input voltage
The maximum power consumption under the rated condition is 0.22 W
Test Electricity ...
|
|
Phoenix/Phoenix relay module PLC-RSC-230UC/21-21AU - 2967141
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 230 V AC/220 V DC
advantage
Low-profile design
Adaptation via V8 ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 48DC/21-21 - 2967248
The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and plug-in miniature relays with multi-level contacts, can be mounted on NS 35/7.5 rails, 2PDT, input voltage 48 V DC
advantage
Low-profile design
Efficient system with V8 adapter ...
|
|
Phoenix/Phoenix single relay REL-MR- 4,5DC/21AU - 2961370
Plug-in miniature power relay with multi-layer gold-plated contacts, 1 PDT, input voltage 4.5 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
Line...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-BL-200AC/21HC/MS - 2908178
Plug-in miniature relay with power contact, 1 changeover contact, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 200 V AC
size
Width 13 mm
Height 29 mm
Depth 25.5 mm
Environmental conditions
Ambient temperature (operating) -40 ...
|
|
Phoenix/Phoenix Single Relays - REL-OR3/LDP-125DC/3X21 - 2909207
Plug-in octal relay with power contacts, 3 switching contacts, test button, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 12 V DC
Coil side
Rated input voltage UN 12 V DC
Input voltage range 1 ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24DC/21-21AU - 2967125
PLC-INTERFACE, INCL. PLC-BSC.../21 BASE TERMINAL, SCREW CONNECTION, WITH PLUG-IN MINIATURE MULTILAYER GOLD-PLATED CONTACT RELAY FOR MOUNTING ON DIN RAIL NS 35/7.5, 2 PDTs, input voltage 24 V DC
advantage
Low-profile design
Effective via V8 adapter ...
|
|
Phoenix/Phoenix relay module PLC-RSC-230UC/21-21 - 2967099
The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and plug-in miniature relays with multi-level contacts, can be mounted on NS 35/7.5 rails, 2PDT, input voltage 230V AC/220V DC
advantage
Low-profile design
Implemented via V8 adapter ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-110DC/21HC/MS - 1012737
Plug-in miniature relay with power contact, 1 changeover contact, test key, mechanical switch position indicator, status LED, freewheeling diode, polarity A1+, A2-, input voltage 110 V DC
advantage
The strap can detect manual operation
Integrated status LEDs
Switching current max. 16 A ...
|
|
Phoenix/Phoenix Time Relays Timing Relay - ETD-BL-2T-I-230-PT - 2907714
Compact pulse encoder with adjustable pulse and pause time (50 ms - 100 h), wide-area power supply, Push-in connection, 1 PDT
Product Description:
Increasing demands are placed on safety and system reliability in all areas. Mechanical engineering, chemical industry, power plants and self-propelled ...
|
|
RIF-1-RPT-LDP-24DC/2X21AU - 2903330
Pre-assembled relay modules with plug-in connections, including: relay bases, multi-layer contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 24 V DC
changeover contacts
Switch contact type Single contact
Drive & Function Monostable ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 12DC/21AU - 2961163
Plug-in miniature power relay with multi-layer gold-plated contacts, 1 PDT, input voltage 12 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
Ruler...
|
|
Relay module with manually operated locking - PLC-RPT- 24UC/21/MS - 2909668
PLC-INTERFACE, INCL. PLC-BPT.../21 BASE TERMINAL, PLUG-IN CONNECTION, PLUG-IN MINIATURE RELAY WITH POWER CONTACTS AND MANUAL OPERATION, 1 CO CONTACT, 24 V AC/DC INPUT VOLTAGE
advantage
Low-profile design
Effective system use via V8 adapter
|
|
Phoenix/Phoenix relay module RIF-1-RPT-LV-120AC/2X21AU - 2903328
Pre-assembled relay modules with plug-in connections, including: relay bases, multi-layer contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 120 V AC
Maximum power consumption under rated conditions is 0.96 W
Test voltage (coil/contact ...
|
|
Phoenix/Phoenix relay module with manually operated locking - PLC-RSC-120UC/ 1AU/MS/SEN - 2909664
The PLC-INTERFACE is suitable for input functions, including the PLC-BSC.../SEN base terminals, screw connection, plug-in miniature relays with multi-layer gold-plated contacts and manual operation, 1 normally open contact, 120 V AC/110 V DC input voltage
size
Width 6. ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24UC/21 - 2966184
The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and the plug-in miniature relay with multi-level contacts, can be mounted on the NS 35/7.5 rail, 1PDT, input voltage 24V AC/DC
advantage
Low-profile design
Effective ...
|
|
Phoenix/Phoenix Single relay with manually operated locking function - REL-IR2/LDP-110DC/2X21 - 2903663
Plug-in industrial relay with power contacts, 2 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, input voltage: 110 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ring...
|
|
Phoenix/Phoenix relay module RIF-2-RPT-LV-230AC/4X21AU - 1188200
Prefabricated relay modules with plug-in interfaces, including: relay bases, multi-layer contact relays, pluggable display/interference suppression modules, and fixed brackets.
Contact type: 4 changeover contacts. Input voltage: 230 V AC
All suppliers of 76 Technology have been strictly audited ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-120AC/21-21/MS - 2987969
Plug-in miniature relay with power contacts, 2 PDTs, test key, mechanical switch position display, status LED, coil voltage 120 V AC
advantage
The strap can detect manual operation
Mechanical switch position display
DC model with freewheeling diode
Switching current up to 16 A
Integration...
|
|