PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, plug-in miniature relay with multi-layer gold-plated contacts and manual operation, 1 changeover contact, 125 V DC input voltage
size
Width 6.2 mm
Height 80 mm
Depth 94 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 55 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Protection class RT II (relay)
IP20 (Relay Base)
Coil side
Rated input voltage UN 125 V DC
Typical input current at UN is 3 mA
Typical response time is 5 ms
Typical release time is 8 ms
Protection Circuits Polarity Protection Polarity Protection Diodes
Standby diode Damping diode
The operating voltage is displayed with a yellow LED
Power consumption at rated conditions is 0.22 W
Contact side
Contact Type: 1 changeover contact
Switch contact type Single contact
Contact material AgSnO, hard gold plating
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 100 mV at 10 mA
Minimum switching current 1 mA (24 V)
The maximum starting current is 50 mA
Limit continuous current to 50 mA
Maximum power rating (resistive load) 1.2 W (24 V DC)
Contact surface (with destructible gold plating)
Precautions If the plating is damaged, the following values can be applied
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 100 mA)
Limit continuous current to 6 A
Minimum switching current 10 mA at 12 V
Maximum power rating (resistive load) 140 W (24 V DC)
20 W (for 48 V DC)
18 W (can be used for 60 V DC)
23 W (for 110 V DC)
40 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.2 A (at 110 V, 13 DCs)
0.1 A (at 220 V, 13 DCs)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)
overview
Test voltage 4 kV AC (50 Hz, 1 minute, coil/contact)
Mode of operation 100% working factor
Flammability rating according to UL 94 V0 (enclosure)
Mechanical life 2x 107 switching cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection Name Coil Side
Connection: Screw connection
Stripping length 8 mm
Thread M3
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1.5 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Connect to data2
Connection Name Contact Side
Connection: Screw connection
Stripping length 8 mm
Thread M3
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1.5 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the relay module with manual operation locking function of Germany brand Phoenix - PLC-RSC-125DC/21AU/MS - 2909658 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix relay modules EMG 17-REL/KSR-W230/21-21-LCAU-2941468
Relay module with solid state miniature electromagnetic relay, contacts (AgNi+Au): small to large loads, 2PDT, input voltage 230VAC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Integrated input module and interference suppression module
Rated ...
|
|
Phoenix/Phoenix Single Relay REL-IR-BL/L-110DC/4X21 - 1109560
Plug-in industrial relay, basic design, with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, polarity A1+, A2-, input voltage: 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life ...
|
|
Phoenix/Phoenix Single Relay REL-PR-BL-115AC/4X21 - 1157971
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 115 V AC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 switching cycles
Test voltage Coil/contact 2 kVrms (50 Hz ...
|
|
Phoenix/Phoenix relay module EMG 22-REL/KSR- 24/21AU -2947721
Relay module with solid-state miniature electromagnetic relay, contacts (AgNi+Au): small to large loads, 1PDT, input voltage 24VAC/DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Integrated input module and interference suppression module
Rated ...
|
|
Phoenix/Phoenix relay module EMG 10-REL/KSR-G 24/ 1-LC AU - 2940087
Relay module with solid-state miniature electromagnetic relay, gold-plated contacts to withstand small loads, 1 NO contact, input voltage 24V DC
advantage
Integrated input module and interference suppression module
Maximum power consumption of 0.5 W under rated conditions
Test voltage (coil/contact ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-OR3/L- 24AC/3X21 - 2903694
Pluggable octal relay with power contacts, 3PDT, test button, mechanical switch position display, coil voltage 24V AC
size
Width 35 mm
Height 35 mm
Depth 54.4 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 55 °C
Ambient temperature ...
|
|
Relay module with manually operated locking - PLC-RPT- 24DC/21-21/MS - 2910519
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation, integrated status LEDs and freewheeling diode, Push-in connection, 2 changeover contacts, input voltage: 24 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Phoenix/Phoenix Single Relay - REL-MR-110DC/1IC 1081621
Pluggable miniature power relay with power contacts for high impulse currents up to 130 A peak, 1 NO contact, input voltage: 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 3x 107 switching cycles
Insulation characteristics
Overpower ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 72UC/21-21/RW- 2900347
PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature power contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 2 PDTs, input voltage 72 V DC
advantage
...
|
|
Phoenix/Phoenix relay module PLC-RPT-12DC/21-21/EX - 2909513
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with plug-in connection and plug-in relay with power contacts, 2 changeover contacts, 12 V DC input voltage. It is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2.
Forehead...
|
|
Phoenix/Phoenix relay module PLC-RSC- 48DC/21HC - 2967646
PLC-INTERFACE, INCL. PLC-BSC.../21 HC base terminal, screw connection, with plug-in miniature relay for high continuous currents, for mounting on DIN rail NS 35/7.5, ultimate continuous current up to 10 A, 1 PDT, input voltage 48 V DC
advantage
Place...
|
|
RIF-1-RPT-LV-24AC/2X21 - 2903333
Pre-assembled relay modules with plug-in connections, including: relay bases, high-power contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 24 V AC
Service life, electrical aspects See graph
Maximum ...
|
|
Phoenix/Phoenix relay module PLC-RSC-12DC/21-21/EX - 2909517
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with screw connection and plug-in relay with power contact, 2 changeover contacts, 12 V DC input voltage. It is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2.
Rated...
|
|
PLC-RPT-230UC/21-21/SO46 - 1136245
The use of a PLC-INTERFACE prevents interference currents or voltages on the control side. Includes base terminal with plug-in connection, with "hot" mating miniature relay with power contacts, 2 changeover contacts, 230 V AC input voltage
Test voltage Coil/contact 4 kVrms (50 ...
|
|
REL-FO/L-120AC/2X21 - 1308314
Plug-in miniature relay, FASTON connection, 2 changeover contacts, status display: LED yellow, input voltage: 120 V AC
Coil side
Rated input voltage UN 120 V AC
Input voltage range 96 V AC ... 132 V AC
Trunk frequency 50/60 Hz
Typical under the UN ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-OR3/LDP-24DC/3X21 - 2903693
Plug-in octal relay with power contacts, 3 PDTs, test button, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 24 V DC
size
Width 35 mm
Height 35 mm
Depth 54.4 mm
Environmental conditions
Ambient temperature ( ...
|
|
Phoenix/Phoenix relay module EMG 10-REL/KSR-G 24/ 1-LC - 2942108
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large loads, 1 NO contact, input voltage 24V DC
advantage
Integrated input module and interference suppression module
Maximum power consumption of 0.5 W under rated conditions
Test voltage Coil/contact 4 ...
|
|
Phoenix/Phoenix relay modules DEK-REL- 24/1/AKT- 2964063
Relay module for actuators with solid state miniature relays, contacts (AgNi+Au): small to medium loads, 1 normally open contact, input voltage 24V AC/DC, mountable on NS 35/7.5, module thickness 6.2mm
advantage
Reduced costs due to the elimination of N-terminals
Most...
|
|
Phoenix/Phoenix relay module - PLC-RSC- 12DC/21AU/MS - 2909654
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, plug-in miniature relay with multi-layer gold-plated contacts and manual operation, 1 changeover contact, 12 V DC input voltage
size
Width 6.2 mm
Height 80 mm
Depth 94 ...
|
|
Phoenix/Phoenix safety relays - REL-SR- 24DC/2X21/FG 2908777
Safety relays with positively guided contacts in accordance with DIN EN 61810-3, contact type: 2 changeover contacts. If the circuit is designed with 1 NO contact/1 NC contact, it meets the requirements of DIN EN 61810-3 Class A.
Coil side
Rated input voltage UN 24 V DC
...
|
|
Contact
working hours
