PLC-INTERFACE, INCLUDING RELAY BASE AND PLUGGABLE POWER CONTACT RELAY WITH MANUAL OPERATION AND INTEGRATED STATUS LED, PUSH-IN CONNECTION, 2 CO CONTACTS, INPUT VOLTAGE: 24 V AC/DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental conditions
Ambient temperature (operating) -20 °C ... 60 °C
Ambient temperature (storage / transport) -20 °C ... 85 °C
Maximum height ≤ 2000 m
Protection class RT II (relay)
IP20 (Relay Base)
≥ IP54 (mounting position)
Coil side
Rated input voltage UN 24 V AC/DC
Typical input current at UN is 18 mA
Typical response time 3 ms ... 15 ms
Typical release time range 3 ms ... 15 ms
Coil voltage 24 V DC
Protection circuit Bridge rectifier Bridge rectifier
The operating voltage is displayed with a yellow LED
Contact side
Contact Type: 2 changeover contacts
Switch contact type Single contact
Contact material AgNi
Maximum switching voltage 250 V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250 V (L1, L2, L3), a bulkhead PLC-ATP must be used. FBST 8-PLC… Or... FBST 500… for equipotential bridging)
Minimum switching voltage 12 V (10 mA)
Minimum switching current 10 mA (12V)
Maximum start-up current 12 A (20 ms)
Limit continuous current to 6 A
Maximum power rating (resistive load) 192 W (24 V DC)
62 W （48 V DC）
42 W （60 V DC）
55 W （110 V DC）
66 W （220 V DC）
2000 VA （250 V AC）
Switching capacity 1 A (24 V, DC13)
1.5 A （230 V, AC15）
overview
Test voltage 4 kV AC (50 Hz, 1 minute, coil/contact)
2.5 V AC (50 Hz, 1 min, CO contact/CO contact)
Mode of operation 100% working factor
Flammability rating according to UL 94 V0 (enclosure)
Mechanical life 5x106 switching cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection Name Coil Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Connect to data2
Connection Name Contact Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix relay module with manual operation locking function - PLC-RPT- 24UC/21-21/MS - 2910520 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix Single Relay REL-MR- 24DC/ 1ICT - 2987338
Pluggable miniature power relay with tungsten front contacts for high impulse currents up to 800 A peak, 1 NO contact, input voltage: 24 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection can be achieved up to RT I...
|
|
RIF-4-RPT-LV-230AC/3X21 - 2903276
Pre-assembled relay modules with plug-in connections, including: relay bases, high-power contact relays, plug-in display/suppressor modules and brackets. Contact type: 3 PDT. Input voltage: 230 V AC
The maximum power consumption under rated conditions is 3.22 W
Test voltage coil/contact ...
|
|
Phoenix/Phoenix Single Relay REL-PR-BL-220DC/4X21 - 1157968
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 220 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 switching cycles
Test voltage Coil/contact 2 kVrms (50 Hz ...
|
|
Phoenix/Phoenix Relays PLC-RPT-110UC/21HC/RW - 2900326
The PLC-INTERFACE is suitable for rail applications and high continuous currents, including base terminals, plug-in connection with plug-in miniature relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 1 PDT, input voltage 110 V DC
Excellent...
|
|
Phoenix/Phoenix relay module PLC-RSC-230UC/ 1AU/SEN/SO46 - 1125984
PLC-INTERFACE that resists current/voltage interference on the control side. Includes PLC-BSC-230UC/1/SEN/SO46 base terminal with screw connection, plug-in miniature relay with multi-layer gold-plated contacts, 1 NO contact, 230 V AC input voltage
Test voltage (line ...
|
|
Phoenix/Phoenix Single Relay REL-FO/L-120AC/1X21 - 1308310
Plug-in miniature relay, FASTON connection, 1 changeover contact, status display: LED yellow, input voltage: 120 V AC
Test voltage 5 kVrms (50 Hz, 1 minute, coil/contact)
Test voltage 1 kVrms (50 Hz, 1 min, open contact)
Rated insulation ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 12DC/21 - 2966906
The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and plug-in miniature relays with multi-level contacts, can be mounted on NS 35/7.5 rails, 1PDT, input voltage 12 V DC
advantage
Low-profile design
Efficient system with V8 adapter ...
|
|
Phoenix Single Relay REL-MR-BL-110DC/21HC - 1109539
Pluggable miniature power relay, basic design, with power contacts, for high continuous currents, 1 changeover contact, input voltage 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 1x 107 cycles
Insulation characteristics
Overvoltage Category ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR2/LDP-125DC/2X21 - 2903664
Pluggable industrial relay with power contacts, 2 PDTs, test button, status LED, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 125 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
...
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/21/EX - 2909530
PLC-INTERFACE, consisting of DIN rail mountable, 6.2 mm base terminal with plug-in interface and plug-in miniature relay with 6 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
Phoenix/Phoenix relay module RIF-1-RPT-LV-120AC/2X21AU - 2903328
Pre-assembled relay modules with plug-in connections, including: relay bases, multi-layer contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 120 V AC
Maximum power consumption under rated conditions is 0.96 W
Test voltage (coil/contact ...
|
|
Phoenix/Phoenix Single Relay REL-MR- 60DC/21 - 2961118
Plug-in miniature power relay with power contacts, 1 PDT, input voltage 60 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
Product Category ...
|
|
Relay module with manually operated locking - PLC-RSC- 24DC/21-21AU/MS - 2910507
PLC-INTERFACE, including relay base and pluggable multi-layer gold contact relay with manual operation, integrated status LEDs and freewheeling diode, screw connection, 2 changeover contacts, input voltage: 24 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
REL-MR- 24AC/21HC - 2961406 single relays from Phoenix
Plug-in miniature power relay with power contacts for high continuous current, 1 PDT, input voltage 24 V AC
Advantage: Switching current up to 16 A
Coil side
Rated input voltage UN 24 V AC
Input voltage range 18.72 V AC ... 37.2 V AC
...
|
|
REL-IR4/LDP-125DC/4X21AU - REL-IR4/LDP/4X21AU - PHOENIX Single relay with manual operation locking - 2903674
Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 125 V DC
size
Width 21.2 mm
Height 27.5 mm ...
|
|
Phoenix/Phoenix Single Relay REL-MR- 24DC/21HC AU - 2961545
Pluggable miniature power relay with multi-layer gold-plated contacts for high continuous current, 1 PDT, input voltage 24 V DC
advantage
RT III certified (wash-resistant)
Switching current up to 16 A
Coil side
Rated input voltage UN 24 V DC
Input voltage range 15.6 ...
|
|
RIF-2-RSC-LV-120AC/2X21 - 2903322
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 2 changeover contacts. Input voltage: 120 V AC
The maximum power consumption under rated conditions is 1.56 W
Test voltage ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 12DC/21-21AU - 2900337
PLC-INTERFACE, incl. PLC-BPT.../21-21 base terminal with plug-in connection with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 12 V DC
advantage
Low-profile design
Implemented via V8 adapter ...
|
|
RIF-1-RSC-LDP-24DC/2X21/FG relay module from Phoenix - 2909848
Prefabricated relay modules with screw connection, including: relay base, safety relay with positively guided contacts (acc. to DIN EN 61810-3), plug-in display/interference suppression module and bracket, contact type: 2 changeover contacts, input voltage: 24 V DC
...
|
|
Phoenix/Phoenix relay module RIF-1-RPT-LV-24AC/2X21AU-2903329
Pre-assembled relay modules with Push-in connections, including: relay bases, multi-layer contact relays, pluggable display/interference suppression modules, and fixing brackets. Contact switching type: 2 changeover contacts. Input voltage: 24 V AC
The maximum power consumption under rated conditions is 0.79 W
Measure...
|
|
Contact
working hours
