Mini slim BGS reflective M8 connector type 30mm PR-MB30CN
specification
| Model | PR-MB30CN | | type | BGS reflection | | output | NPN | | shape | Compact and slender | | Connection patterns | M8 connector: 4-pin | | Detection distance | 1 to 30 mm | | Control the number of outputs | 2 | | Output actions | Output 1 | ON when light is in | | Output 2 | ON when shading | | Response time | Output 1 | 0.5 ms | | Output 2 | ON → OFF：2.7ms、OFF → ON：0.5ms | | Sensitivity adjustment | N/A | | Spot diameter | Approx. ø5.5mm (at 30mm) | | light source | 4 Element Point Light Red LED (650nm) | | Prevent mutual interference function | 4 units | | Displays an indicator | Output Indicator (Orange), Steady Action Indicator (Green), Transmitted Transmitter: Power Indicator (Green) | | Control the output | 30 VDC or less, 50 mA or less | | Leakage current: | | 0.3 mA or less at 3 kΩ, 0.5 mA or less at 1 kΩ, 1.5 mA or less at 0.2 kΩ | | Residual Voltage: | | Less than 1.0 V at 10 mA, less than 1.5 V at 10 to 30 mA, and less than 2.0 V at 30 to 50 mA | | Protection circuits | Power supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection | | rated | Supply voltage | 10 to 30 VDC, including ripple (P-P) 10 % | | Current consumption | 19 mA | | Environmental resistance | Enclosure protection grade | IP67 (IEC60529)、IP69K (DIN40050-9)、4X、6P、13 (NEMA250) | | Insulation resistance | 20 MΩ or more (500 VDC) | | Ambient lighting | Incandescent lamp: 5,000 lx or less, Daylight: 20,000 lx or less | | Ambient temperature | -25 to +55 °C (no freezing) | | Store at ambient temperature | -25 to +75 °C | | relative humidity | 35 to 85 % RH (non-condensing) | | Withstand voltage | 1,000 VAC、50/60 Hz、1 min | | Earthquake resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions | | Impact resistance | 6 times each in the 1,000 m/s2, X, Y, Z directions | | Material | Housing: SUS316L, Indicator Housing/Lens Cover: Polysulfone, Cable Protective Cover: Polymethylpentene, Filling Material: Polyester Series Resin | | weight | About 13 g |
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F Series PR-MB30CN products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
KEYENCE/KEYENCE Laser Sensor LR-X Series Trim Mounting Bracket LR-XB1
Model: LR-XB1
Shape: Trim mounting bracket (sensor probe fixing screw × 2, mounting bracket fixing screw × 2/plate nut × 1 accessory)
Material: Zinc nickel plated SUS304 PPS etc
Weight: approx. 30 g
This article introduces KEYENCE/KEYENCE...
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Subminiature Amplifier PR-M/F Series OP-87668
Square nut for mini ultra-thin
Type: Plate nut for slender length
Applicable products: PR-M series
Number of Builts: 2 pcs
Material: SUS316L
Weight: approx. 2 g
In this article, we introduce the KEYENCE/KEYENCE OP-876 Series P-M/F Series Photoelectric Sensor with Built-in Ultra-Small Amplifier ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series OP-87619
Connector cable M8L word 2m resistant
Type: Connector cable Chemical resistant
End Shape: M8 L-Shaped - Loose Wire
Length: 2 m
Material: Cable: PVC, Nut: SUS316L
Weight: approx. 70 g
This article introduces the KEYENCE/KEYENCE amplifier built-in CM ...
|
|
KEYENCE/KEYENCE Amplifier Built-in TOF Laser Sensor LR-T Series OP-88030
Connector kit for sensor and controller connection for PUR cables
Type: Cable: PUR (Polyurethane) use
Target products: OP-87636/87637, OP-87640/87641
Weight: approx. 3 g
This article introduces the KEYENCE/KEYENCE amplifier built-in TOF laser sensor ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB15N3
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series Square Reflective Type (Background Suppression) Cable Type 15mm PR-FB15N3
specification
In this article, we introduce the KEYENCE/KEYENCE SUBMINIATURE AMPLIFIER built-in photoelectric sensor PR-M/F Series P ...
|
|
KEYENCE/KEYENCE Sensor Head LJ-V7060K
Sensor head LJ-V7060K Reference distance: 54.6 mm
Enclosure rating: IP67 (IEC60529)*7
Ambient light: Incandescent lamp: 10,000 lux*8 max
Ambient temperature: 0 to +45 °C*9
Relative humidity: 85%RH or less (non-condensing)
Earthquake resistance: ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor IX-150
Sensing head 150 mm
specification
*1 X: Laser long dimension direction, Y : Laser short dimension direction
*2 When facing each other at the base distance. Scanning mode: When measuring with a height tool, a small measuring point, and no position correction.
*3 When facing at the base distance. ...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H050
Sensor head Spot Type LK-H050
specification
This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H050 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can ...
|
|
KEYENCE/KEYENCE Fiber Optic Unit Limited Reflective Type FU-38L
Fiber Optic Unit Limited Reflective Type FU-38L
The direction in which the light is emitted: Bracket
Fiber optic device length: 2m free cut
Diameter of the fibre optic unit: ø2.2×2
Minimum bending radius: R25 mm
Environmental Resistance Ambient temperature: -40 to +60 °C
Weight: approx. 20 g
Root...
|
|
KEYENCE/KEYENCE amplifier built-in CMOS laser sensor LR-Z series LR-ZH500C3P
Square type High power reflective type M8 connector type 500mm
specification
*1 IO-Link: Specification v.1.1/COM2 (38.4 kbps) is supported. The configuration software can be downloaded from the KEYENCE website.
If you are using the file in an environment where you cannot download files over the Internet, please contact ...
|
|
KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A07
Sensor head-controller cable 0.7m CB-A07
Length: 0.7 m
Weight: approx. 100 g
This article introduces the KEYENCE/KEYENCE sensor head-controller cable CB-A07 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, I ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series Adjustable Bracket OP-87404
Adjustable bracket OP-87404
Type: Adjustable stand
Target products: LR-Z series
Material: Bracket: Zinc nickel plated/SUS430, Bolt: Copper nickel plated, Nut: Iron nickel plated, Screw for sensor mounting: SUS316L
Weight: approx. 95 g
This article introduces KEYENCE/KEYENC ...
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Subminiature Amplifier PR-M/F Series OP-87407
Fixing screws 65mm
Summary: Screws to fix the adjustable bracket for the LR-Z series.
Target products: LR-Z series
Length: 65 mm
Material: Bolt: Nickel Plated Copper, Nut/Washer: Nickel Plated Iron
Weight: approx. 80 g
This article introduces the KEYENCE/KEYENCE ultra-miniature ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-MB15N1
Mini Slim Reflective Type (Background Suppression) Cable Type 15mm PR-MB15N1
specification
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F Series PR-MB15N1 products, if you are interested in KEYENCE/KEYENCE products, please contact ...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H155
Sensor head wide type LK-H155
specification
This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H155 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB30N3
KEYENCE/KEYENCE Photoelectric Sensor with Built-in Ultra-Small Amplifier PR-M/F Series Squared Reflective Type (Background Suppression) Cable Type 30mm PR-FB30N3
specification
In this article, we introduce the KEYENCE/KEYENCE ultra-compact amplifier built-in photoelectric sensor PR-M/F Series PR-FB30N ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB100CN
Square Reflective Type M8 Connector Type 100mm
*1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF".
*2 The FDA's (CDRH) laser classification is based on IEC60 ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-MB30N3
Mini Slim Reflective Type (Background Suppression) Cable Type 30mm PR-MB30N3
specification
This article introduces the KEYENCE/KEYENCE ultra-compact amplifier built-in photoelectric sensor PR-M/F Series PR-MB30N3 products, if you are interested in KEYENCE/KEYENCE products, please contact me ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB100N NPN Output Cable Exit Type (2m)
Reflective sensor with through-beam stability. It is not affected by the surface color, material, inclination, etc. of the workpiece. 316L stainless steel body shell, protection grade IP68/69K, can be used in various occasions.
Launched high-power type
Using the traditional* reflective transmission method that detects with light intensity...
|
|
KEYENCE/KEYENCE sensor LJ-G015
Enclosure rating: IP67 (IEC60529)
Ambient light: Incandescent/fluorescent: 5,000 lux*5 max
Ambient temperature: 0 to +50 °C
Relative humidity: 35 to 85 % RH (non-condensing)
Seismic resistance: 10 to 55 Hz, double amplitude 1.5 mm, X,Y,Z ...
|
|
Contact
working hours
