Mini Slim Reflective Type (Background Suppression) Cable Type 30mm PR-MB30N3
specification
| Model | PR-MB30N3 | | type | BGS reflection | | output | NPN | | shape | Compact and slender | | Connection patterns | 3M cables | | Detection distance | 1 to 30 mm | | Control the number of outputs | 2 | | Output actions | Output 1 | ON when light is in | | Output 2 | ON when shading | | Response time | Output 1 | 0.5 ms | | Output 2 | ON → OFF：2.7ms、OFF → ON：0.5ms | | Sensitivity adjustment | N/A | | Spot diameter | Approx. ø5.5mm (at 30mm) | | light source | 4 Element Point Light Red LED (650nm) | | Prevent mutual interference function | 4 units | | Displays an indicator | Output Indicator (Orange), Steady Action Indicator (Green), Transmitted Transmitter: Power Indicator (Green) | | Control the output | 30 VDC or less, 50 mA or less | | Leakage current: | | 0.3 mA or less at 3 kΩ, 0.5 mA or less at 1 kΩ, 1.5 mA or less at 0.2 kΩ | | Residual Voltage: | | Less than 1.0 V at 10 mA, less than 1.5 V at 10 to 30 mA, and less than 2.0 V at 30 to 50 mA | | Protection circuits | Power supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection | | rated | Supply voltage | 10 to 30 VDC, including ripple (P-P) 10 % | | Current consumption | 19 mA | | Environmental resistance | Enclosure protection grade | IP67 (IEC60529)、IP69K (DIN40050-9)、4X、6P、13 (NEMA250) | | Insulation resistance | 20 MΩ or more (500 VDC) | | Ambient lighting | Incandescent lamp: 5,000 lx or less, Daylight: 20,000 lx or less | | Ambient temperature | -25 to +55 °C (no freezing) | | Store at ambient temperature | -25 to +75 °C | | relative humidity | 35 to 85 % RH (non-condensing) | | Withstand voltage | 1,000 VAC、50/60 Hz、1 min | | Earthquake resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions | | Impact resistance | 6 times each in the 1,000 m/s2, X, Y, Z directions | | Material | Housing: SUS316L, Indicator Housing/Lens Cover: Polysulfone, Cable Protective Cover: Polymethylpentene, Filling Material: Polyester Series Resin | | weight | Approximately 45 g |
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F SERIES PR-MB30N3 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series Adjustable Bracket OP-87404
Adjustable bracket OP-87404
Type: Adjustable stand
Target products: LR-Z series
Material: Bracket: Zinc nickel plated/SUS430, Bolt: Copper nickel plated, Nut: Iron nickel plated, Screw for sensor mounting: SUS316L
Weight: approx. 95 g
This article introduces KEYENCE/KEYENC ...
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Amplifier PR-M/F Series OP-87670
Slit plate φ0.5 square use
Type: Slender for flat surfaces
Number of Builts: 1pcs
Slit plate size: ø0.5
Material: SUS304
Remarks: ・Detection distance: 30mm (when both transmit and receiver sides are attached) ・Transmission type only
Weight; About 1 g
This article introduces KEYENCE's ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-Z Series weighs approximately 110g
Introduction: The LR-Z is designed to provide reliable and simple operation to any user. Large indicator lights ensure excellent visibility over long distances. Simplify operation with the addition of a digital 7-segment display and one-touch teach-in. Easily set the sensitivity while monitoring whether the digital display is working properly ...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H082
Sensor head Spot type Laser class 2 LK-H082
specification
This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H082 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-MB15P3
Mini Slim Reflective Type (Background Suppression) Cable Type 15mm PR-MB15P3
specification
This article introduces the KEYENCE/KEYENCE ultra-miniature amplifier built-in photoelectric sensor PR-M/F SERIES PR-MB15P3 products, if you are interested in KEYENCE/KEYENCE products, please contact ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87459
Ethernet cable (M12 4pin-RJ-45) NFPA79 standard standard cable 10 m
Type: NFPA79 standard Ethernet cable
End shape: M12 4pin-RJ-45
Length: 10 m
This article introduces the KEYENCE/KEYENCE multi-point laser sensor OP-8745 ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series OP-87409
Metal fittings are attached to the back
Type: Metal bracket for back mounting
Target products: LR-Z series
Material: SUS316L
Weight: approx. 30 g
This article introduces the KEYENCE/KEYENCE amplifier built-in CMOS laser sensor LR-Z series OP-87409 products.
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor IX-CP50
Control panel for IX
specification
*1 Dedicated to connection to IX-1000/1050/H2000/H2050.
*2 When connecting to the IX-H2000/H2050, only Chinese (Simplified), Japanese, and English are supported
*3 Please use KEYENCE's recommended products.
*4 When the ambient temperature exceeds 40°C, ...
|
|
LR-T series LR-TB2000C TOF laser sensor with built-in KEYENCE/KEYENCE amplifier
Detection distance: 2m M12 connector cable type Laser classification 2
specification
*1 Can be displayed from 50 to 2200.
*2 The classification by the FDA (CDRH) is based on IEC60825-1 and is implemented in accordance with the requirements of Laser Notice No. 50.
*3 I/O can be advanced from the following combinations ...
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Amplifier PR-M/F Series OP-87664
Adjustable relay metal fittings
Type: Adjustable trunk mount
Applicable products: PR series, PZ series, LR series
Material: Zinc nickel plated, others
Weight: approx. 190 g
In this article, we introduce the KEYENCE/KEYENCE UV-miniature amplifier built-in photoelectric sensor PR-M/F series ...
|
|
KEYENCE/KEYENCE sensor LJ-G015
Enclosure rating: IP67 (IEC60529)
Ambient light: Incandescent/fluorescent: 5,000 lux*5 max
Ambient temperature: 0 to +50 °C
Relative humidity: 35 to 85 % RH (non-condensing)
Seismic resistance: 10 to 55 Hz, double amplitude 1.5 mm, X,Y,Z ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH50(10M)
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH50 (10M) Laser Sensor Amplifier Split Type Sensor Head (Detection Distance: 50 mm) with a cable length of 10 m
*1 Classified according to Laser Notice No. 56 in the FDA (CDRH) on the IEC60825-1 basis ...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H022K
Sensor head Spot Type LK-H022K
specification
This article introduces KEYENCE/KEYENCE CMOS laser displacement sensor controller LK-H022K products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope we ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series Tail Unit (2 pcs) OP-26751
KEYENCE Laser Sensor LR-X Series Tail Unit (2 units) OP-26751
Type: Tail unit
Summary: When adding a sensor amplifier main unit and an expansion unit, clamp the amplifier to fix the tail unit.
Applicable products: FS-N10 series and other add-on ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-MB15N1
Mini Slim Reflective Type (Background Suppression) Cable Type 15mm PR-MB15N1
specification
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F Series PR-MB15N1 products, if you are interested in KEYENCE/KEYENCE products, please contact ...
|
|
KEYENCE/KEYENCE Amplifier Built-in TOF Laser Sensor LR-T Series
Reflective laser sensors with detection distances of up to 5 meters and installation restrictions. The distance detection principle is not affected by the surface of the object, and can detect a variety of workpieces.
Excellent detection capabilities
The LR-T series offers a variety of innovative features to detect targets previously thought undetectable. ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250CG (Detection Distance: 250mm)
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250CG Laser Sensor Standard M8 Connector Metal Sheathed Cable Type (Detection Distance: 250mm)
*1 The cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m.
...
|
|
KEYENCE/KEYENCE Flow Sensor FD-M Series has a pressure resistance of 2.0 MPa
Introduction: KEYENCE/KEYENCE Flow Sensor FD-M Series The FD-M Series uses Faraday's law to determine the flow rate of conductive liquids. A typical electromagnetic flow sensor uses electrodes that are in contact with the liquid inside the test tube to detect the electromotive force of the liquid. The FD-M series is determined by electrostatic capacitance ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB100P
Square Reflective Cable Type 100mm
specification
*1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF".
*2 The FDA's (CDRH) laser classification is based on IEC608 ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZH490CB
Screw type reflective type M12 connector type 490mm
This article introduces the LR-Z series LR-ZH490CB products with CMOS laser sensor built into KEYENCE/KEYENCE amplifiers, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your visit.
|
|
Contact
working hours
