|
IDEC/Izumi HE1G Handheld Enabling Switch HE9Z-GBK1
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
Pressing ON ⇒ OFF is a direct open-circuit action function.
By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.
(IEC60204-1; 9.2.5.8 ...
|
|
IDEC/Izumi HS5B type safety switch HS5B-02NP
Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs.
IP67 (IEC60529) protection structure is used for the contact parts.
The NC contact has a direct disconnect operation structure. (IEC/EN60947 ...
|
|
IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC5915
Small size (external dimensions: 7mm× 16mm×51mm).
Simple alignment during installation.
Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type).
IP67 protection structure.
Mechanical Specifications:
Contact structure 1NC+1NO
Functional Specifications:
With or without an indicator ...
|
|
IDEC/Izumi HE1G Handheld Enabling Switch HE9Z-GH1
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
Pressing ON ⇒ OFF is a direct open-circuit action function.
By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.
(IEC60204-1; 9.2.5.8 ...
|
|
IDEC/Izumi HS3A Non-Contact Safety Switch HS9Z-H3YD
The non-contact safety switch with RFID technology improves the safety performance.
Built-in safety features make the construction of a safety system independent of the combination with specific modules.
Thanks to the RFID method, there is no error even if the door closes slowly.
Even when installed on swing doors, sliding ...
|
|
IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC7905
Small size (external dimensions: 7mm× 16mm×51mm).
Simple alignment during installation.
Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type).
IP67 protection structure.
Product Specifications:
Mechanical Specifications:
Contact structure 2NO
Environmental Specifications
Protection...
|
|
IDEC/Izumi HS6B Subminiature HS6B-03B03 Safety Interlock Switch 3NC
IDEC/Izumi HS6B Subminiature HS6B-03B03 Safety Interlock Switch 3NC 3NC Contact, 3m Cable
30x15x78mm enclosure
One-piece cables reduce wiring time
IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage)
Direct door opening action ...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-DT44KMSRP-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HE1G Handheld Enabling Switch HE1G-21SMB-1N
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
Pressing ON ⇒ OFF is a direct open-circuit action function.
By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.
(IEC60204-1; 9.2.5.8 ...
|
|
IDEC/Izumi HE5B Enabling Switch HE5B-M2PB
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HE2B Enabling Switch HE2B-M200PB
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1(2005) ...
|
|
IDEC/Izumi HE3B Enabling Switch HE9Z-D3Y
Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HS5E-KVD003-2A502 Safety switch with key lock
VD circuit, key detachable in all positions, key 502,3m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key removal location for all positions
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
Our customer-centric approach ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-XH7Y4ZM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-XH7Y4ZM-G 2 contacts 2NC, solenoid lock
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic lock and snaplock models are available
Mechanical Specifications:
Catheter open ...
|
|
IDEC/Izumi HS6E Submersible Locking HS6E-N7Y4B03-G Safety Switch Solenoid Lock
IDEC/Izumi HS6E Submersible Locking HS6E-N7Y4B03-G Safety Switch Solenoid LockThe World's Thinnest Solenoid Interlock Switch 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually solved ...
|
|
IDEC/Izumi HS6B Safety Switch HS9Z-A61
IDEC/Izumi HS6B type safety switch HS9Z-A61 Main features: 30mm×15mm×78mm small safety switch. 3 contacts of dual contact + auxiliary contact for applications with high safety requirements. (ISO13849-1, EN954-1)
Plugged in from 2 actuators on request
|
|
IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC5902
Small size (external dimensions: 7mm× 16mm×51mm).
Simple alignment during installation.
Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type).
IP67 protection structure.
Contact structure 1NC+1NO
Our customer-centric service concept: ...
|
|
IDEC/Izumi HS1L Solenoid Safety Switch HS1L-DQ44KMSR-R
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS5B Safety Switch HS5B-02BM
Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs.
IP67 (IEC60529) protection structure is used for the contact parts.
The NC contact has a direct disconnect operation structure. (IEC/EN60947 ...
|
|
IDEC/Izumi HE5B Enabling Switch HE5B-M2PY
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|