Xinhuanet, Beijing, January 1 (Reporter Chen Zhonghao) The Regional Comprehensive Economic Partnership (RCEP) came into force on January 1. The reporter learned from Beijing Customs on the 1st that Beijing Customs approved SMC (China) Co., Ltd. as an approved exporter under RCEP on the same day, which is the first approved exporter under RCEP in Beijing.
An approved exporter refers to an enterprise that has been recognized by the Customs in accordance with the law and can issue a declaration of origin for the goods it exports or produces that are eligible for origin under the relevant preferential trade agreements. After the RCEP comes into effect, enterprises can not only enjoy the corresponding tariff concessions, cumulative rules of origin and other preferential treatments, but also the approved exporter system will also enable enterprises to no longer need to apply for a certificate of origin from the customs on a case-by-ticket basis, but can independently issue a declaration of origin at any time for export goods to enjoy benefits abroad. The efficiency of customs clearance of enterprises will be greatly improved.
SMC (China) Co., Ltd., located in Beijing Economic and Technological Development Zone, is a multinational company with large-scale pneumatic component manufacturing and sales. The company's large-scale pneumatic component production and export base centered in Beijing directly exports products to 78 countries and regions around the world. Guo Liansheng, head of customs affairs of SMC (China) Co., Ltd., said: "Many of our company's import and export goods are of RCEP origin, including countries that have signed a free trade agreement with China for the first time. According to preliminary estimates, the company can reduce taxes by about 30 million yuan in the first year after the implementation of RCEP. ”
To become an approved exporter, three conditions need to be met: first, it is a high-level customs certification enterprise; the second is to grasp the rules of origin under the relevant preferential trade agreements; The third is to establish a complete system of management of origin qualification documents. At present, Beijing Customs has connected with the customs AEO advanced certification enterprises in advance in advance, opened a special RCEP service channel for enterprises, and quickly handled the filing procedures for approved exporters for qualified enterprises.
According to the relevant person in charge of Beijing Customs, from January to November last year, the total import and export volume of RCEP member countries at Beijing port reached 19.205 billion US dollars, a year-on-year increase of 25.71%. In the process of preparing for the implementation of RCEP, Beijing Customs focused on the rules of RCEP trade facilitation, combined the implementation preparations with the key work of serving the Beijing National Service Industry Expansion and Opening-up Comprehensive Demonstration Zone and the construction of the China (Beijing) Pilot Free Trade Zone, and cooperated with local commerce departments and industry associations to organize policy seminars, customs and enterprise dialogues and other activities, such as organizing 6 rounds of online and offline RCEP policy seminars, compiling and distributing the "RCEP Q&A Booklet" and "Q&A on Customs Business at the Origin of Exports".
|
More on that
|
New Product Feature丨OSHA Compliant/Residual Pressure Relief 3-Way Valve VHS□-D/VHS□W-D Series with Keyhole
SMC has launched a new 3-way pressure relief valve VHS□-D/VHS□W-D series with keyhole, which meets OSHA (United States Occupational Safety and Health Administration) standards and can prevent accidents caused by accidental gas supply! Its flow characteristics are increased by up to 88%, which can be achieved by reducing the ...
|
|
Advantages of Compression Molded SMC Mold Oil Heating System
Compression forming molds usually use a hydraulic press, and the upper and lower parts of the mold are fixed on the press. The mold consists of a cavity core, which is the same as an injection mold. The tryout material is placed on the open mold and the press is turned off. The set temperature and the pressure generated by the press melt the raw material into the mold ...
|
|
SMC FAQ – What is the difference between metal seal and elastomeric seal for solenoid valves?
■Metal sealing method
・High durability and longer life
・A small amount of air leakage occurs in the gap between the sliding surfaces
・The inflow of fine particles and foreign matter can cause the pilot spool to become stuck
・Low actuation force, suitable for high-speed and high-frequency actuation
■Elastic sealing method
・Low air leakage
・ Liquid foreign matter, oil ...
|
|
SMC magnetic switch is two-wire or three-wire
Contactless magnetic switches, also known as solid-state electronic magnetic switches, are a form of switches that use semiconductor characteristics and amplification loops, and the magnetic switches of this structure inevitably have problems such as leakage current and internal voltage drop. The structure of the 2-wire and 3-wire magnetic switches is shown in the following figure ...
|
|
Introduction and maintenance of SMC filters
SMC filter element is an indispensable device in the pipeline system of conveying media. The Y-type filter is a small device that removes less solid particles from the liquid, which can protect the normal operation of the equipment. When the fluid enters the cartridge with a certain specification screen, the bullying is blocked, and the clean filtrate is removed from the ...
|
|
Honor Spur! SMC won the "2021 China Industrial Digital Transformation Pilot Enterprise"
On July 28, the 11th China Intelligent Manufacturing Summit Forum and the 19th China Intelligent Manufacturing Year-end Inventory Award Ceremony hosted by e-works were held in Hangzhou. SMC was invited to attend the conference and won the "2021 China Industrial Digital Transformation Pilot Enterprise" award.
The award is awarded by ...
|
|
A brief introduction and precautions for SMC cylinders
The SMC standard cylinder is a pneumatic actuator that converts the pressure energy of a compressed gas into mechanical energy. There are two common types: reciprocating linear motion and reciprocating oscillation, which are widely used in printing, semiconductors, automatic control, robots, etc. The following is a brief introduction to the SMC cylinder block.
SMC Standard Gas ...
|
|
What is the A stroke of the double stroke cylinder/single piston rod type cylinder (-XC11), the B stroke of the B stroke? – SMC cylinders
A
The sequence of strokes in the type representation is
A (rear cylinder) + B (front cylinder).
The full trip refers to the total of the trips represented.
Calculation of full stroke (B-cylinder).
Example) CM2B32-25+25-XC11 ⇒ 25+25=50
Basic conditions (1)・・Front cylinder ...
|
|
SMC's solutions dominate at the Tire Technology Fair in Hannover
SMC will once again be leading the way at this year's Tire Technology Fair Hannover, where the global provider of pneumatic and electrical automation solutions will present its innovative component kit.
At Messe Germany, Hall 21, Booth 9064, SMC will be presenting a series of ...
|
|
Installation method of SMC glass water tank
SMC FRP water tank is a kind of water tank suitable for various industrial, civil building water supply, HVAC and other industries, which is characterized by smooth surface, no cracks, and no bubbles in the weld. FRP water tank refers to the water tank processed from FRP as raw material. So how to install the SMC glass water tank?
SMC Glass ...
|
|
SMC Compact 5-Port Solenoid Valve Plug-in JSY1000/3000/5000
The flow rate is increased, and the size is reduced.
Space-saving, lightweight, and large flow.
Power consumption: 0.1 W (model with power-saving circuit*), 0.4 W (standard)
※Customized specifications
Plug-in connection with the cartridge
Available with 4-position double 3-way valves
Container base model: JJ5SY1, JJ5SY3, JJ5S...
|
|
SMC New Product Feature丨Electric Actuator Outlet Type LEY100 Series
SMC has launched a new electric actuator, the LEY100 series, which adds a motor foldback specification to the existing one, with a thrust of up to 12,000 N, a handling weight of 1,200 kg, and a stroke of up to 1,000 mm. The thrust and speed specifications can be changed by means of a reducer, and the installation dimensions are in accordance with the ...
|
|
SMC New Product Feature丨Pulse Valve JSXF/JSXFA Series
SMC has launched a new series of pulse valves for dust collectors, the JSXF/JSXFA series, which has a one-piece structure made of high-strength elastic material for the valve body and diaphragm, and has increased the product life to more than 10 million cycles*.
SMC has launched a new pulse valve for dust collector JSXF/JSXFA series, valve body and membrane ...
|
|
What is the difference between a magnetically coupled rodless cylinder and a mechanically jointed rodless cylinder? – SMC cylinders
The connection method of the slider (external mover) is different.
●Mechanical bonding type (MY series)
Mechanical engagement type (MY series) refers to the opening of a part of the cylinder barrel, and the external slider and piston engagement action. The incision part is made with a sealing tape, which is sealed from the inside and constitutes a ...
|
|
Discover the future of baking automation—SMC
Who doesn't love bread with its sweetness?
Soft and chewy mouthfeel, with a unique wheat aroma,
It's irresistible to its charm. Today we will bring it to you
SMC's automation proposal for the baking industry.
Baking process: from ingredient handling, mixing and stirring ...
|
|
SMC (China) Co., Ltd. Technology Center Laboratory Won CNAS National Accreditation Laboratory Certification!
SMC (China) Co., Ltd. Technology Center Laboratory is an organization specializing in pneumatic testing technical services, mainly carrying out the testing of cylinders and pneumatic reversing valves. In May 2023, all the declared projects of the technology center laboratory passed the final review of the CNAS National Accreditation Committee and were successfully evaluated.
|
|
SMC brings solutions to life at COMPAMED 2017
Visitors to this year's competition will have the opportunity to get a glimpse of SMC's wide range of professional solutions for the life sciences industry.
The trade fair, which took place in Düsseldorf from November 13 to 16, is the leading international marketplace for the medical supplier industry and product development.
From...
|
|
New Product Feature丨Wireless Communication System EXW1/EX600-W Series
SMC has launched a new compact and lightweight wireless communication system EXW1 series, which has increased the communication distance to 100m, uses 2.4 GHz ISM frequency bandwidth and frequency hopping technology, which is highly resistant to interference, in addition to the addition of an external antenna (IP67), even if the basic module/remote module is installed in the control ...
|
|
What is the function of the (air) buffer valve of the cylinder?
A buffer valve is a valve that adjusts the release flow of the enclosed gas when absorbing the kinetic energy generated at the end of the stroke.
Before the end of the stroke, the contact between the buffer sleeve and the buffer seal causes the exhaust to be sealed, the pressure rises, and the shock is absorbed.
The compressed air on the exhaust side of the rising pressure passes through the ...
|
|
SMC Compressed Air Management System
Compressed air management system
When the equipment is detected in a standby state (when production is stopped), the air supply pressure is reduced. Unnecessary air consumption is reduced
THE AIR MANAGEMENT SYSTEM REDUCES COMPRESSED AIR CONSUMPTION, MONITORS AND IMPROVES EQUIPMENT OPERATING EFFICIENCY IN REAL TIME
Automatic/manual adjustment ...
|
|