KEYENCE/KEYENCE Sensor Head Spot Type LK-H053

Enclosure rating: IP67 (IEC60529) Ambient light: Incandescent/fluorescent: 5,000 lux*5 max Ambient temperature: 0 to +50 °C Relative humidity: 35 to 85 % RH (non-condensing) Seismic resistance: 10 to 55 Hz, double amplitude 1.5 mm, X,Y,Z ...

Amplifier unit Panel mount type IL-1550 Power supply voltage: Supplied by the main module*3 Power consumption: 2200mW or less (74mA or less at 30V) Environmental resistance Pollution level: 2 Ambient temperature: -10 to +50 °C (no condensation, no freezing) Relatively wet ...

Connector cable M8 straight type 2m chemical resistant Type: Connector cable Chemical resistant End shape: M8 straight - scattered Length: 2 m Material: Cable: PVC, Nut: SUS316L Weight: approx. 75 g This article introduces the KEYENCE/KEYENCE amplifier built-in CM ...

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH250 (10M) Laser Sensor Amplifier Split Type Sensor Head (Detection Distance: 250mm) with a cable length of 10m *1 According to Laser Notice No. 56 of the FDA (CDRH), the classification is carried out according to the IEC60825-1 standard.

Square Reflective M8 connector type 250mm *1 The M8 connector (3-pin) type does not have an external input function. *2 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to ...

KEYENCE Laser Sensor LR-X Series Mounting Bracket OP-88245 Type: Amplifier mounting bracket Summary: Can be installed without a DIN rail. This article introduces the KEYENCE/KEYENCE Laser Sensor LR-X Series Mounting Bracket OP-88245 product, ...

Multi-function sensor controller handset specification *1 Depending on the connected model, the response time and the type and number of inputs/outputs that can be used may vary. For details, refer to the "MU-N Series User Manual" of the connected model. *2 Number of connections to N-bus devices ...

KEYENCE/KEYENCE Laser Sensor Amplifier Discrete Amplifier M8 Connector Type Main Unit LR-XN11C *1 The power cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m. *2 Output 2 and external input are switched ...

KEYENCE/KEYENCE Laser Sensor Amplifier Discrete Amplifier Cable Type Expansion Unit NPN LR-XN12N *1 When 500 μs is selected, the following limits are specified. · Tuning is limited to 2-point tuning. · The detection range shield is set during tuning. (The screen is not supported...)

Sensor head LJ-V7060K Reference distance: 54.6 mm Enclosure rating: IP67 (IEC60529)*7 Ambient light: Incandescent lamp: 10,000 lux*8 max Ambient temperature: 0 to +45 °C*9 Relative humidity: 85%RH or less (non-condensing) Earthquake resistance: ...

Square Reflective M8 connector type 250mm specification *1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF". *2 The FDA's (CDRH) laser classification is based on the IE ...

Introduction: The RGB digital fiber optic sensor CZ series can detect objects that cannot be detected by some sensors through 2 color screens and 3 sensing methods. Product parameters Model: CZ-12 Type: Area Beam Point, ...

KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series Flat BGS Reflective Cable Type 30mm PR-FB30P3 specification This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F Series PR-FB30P3 products.

Introduction: KEYENCE/KEYENCE Digital Ultrasonic Sensor FW Series uses a new algorithm A.W.S. (Active Wave Stabilizer) to achieve stable inspection without the influence of workpiece differences and ambient light. At the same time, this product has obtained CE mark certification and UL certification, which can be assured to make ...

KEYENCE/KEYENCE Laser Sensor LR-X Series M8 Connector Type Cable High Elasticity 2 m OP-88505 Type: High elasticity Sensor side: M8 4pin straight Cable termination: Loose wires Length: 2 m Material: Cable part :P VC connector ...

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250 Laser Sensor Standard Cable Type (Detection Distance: 250mm) *1 When 500 μs is selected, the following limits are specified. · Tuning is limited to 2-point tuning. · When tuning, the detection range screen is set ...

KEYENCE/KEYENCE Laser Sensor LR-X Series M8 Connector Type Cable OP-88506 High elasticity 5 m Model: OP-88506 Type: High elasticity Sensor side: M8 4pin straight Cable termination: Loose wires Length: 5 m Material: Electric

The LJ-G series can accurately measure the contour of the surface of objects in the X and Z directions. The height, width and clearance on the surface profile can be measured in 28 measurement modes. Product Features: Simultaneous measurements can be taken at 8 points. The E3-CMOS image sensor provides stable measurements Quatro Connect ...

Square nut for mini ultra-thin Type: Plate nut for slender length Applicable products: PR-M series Number of Builts: 2 pcs Material: SUS316L Weight: approx. 2 g In this article, we introduce the KEYENCE/KEYENCE OP-876 Series P-M/F Series Photoelectric Sensor with Built-in Ultra-Small Amplifier ...

Laser sensor standard type M8 connector type (detection distance 250mm) *1 The cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m. *2 When 500 μs is selected, the following limits are specified. · Tuning is limited to 2 points ...